- 您现在的位置：买卖IC网 > PDF目录69011 > M34570M8-XXXFP 4-BIT, MROM, MICROCONTROLLER, PDSO36 PDF资料下载
参数资料
| 型号： | M34570M8-XXXFP |
| 元件分类： | 微控制器/微处理器 |
| 英文描述： | 4-BIT, MROM, MICROCONTROLLER, PDSO36 |
| 封装： | 0.450 INCH, 0.80 MM PITCH, PLASTIC, SSOP-36 |
| 文件页数： | 17/32页 |
| 文件大小： | 319K |
| 代理商： | M34570M8-XXXFP |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页当前第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页
24
MITSUBISHI MICROCOMPUTERS
4570 Group
SINGLE-CHIP 4-BIT CMOS MICROCOMPUTER
(6) Timer 3
Timer 3 is an 8-bit binary down counter with the timer 3 reload
registers (R3H, R3L). Data can be set simultaneously in timer
3 and the reload register (R3L) with the T3AB instruction.
Data can be set in reload register R3H with the T3HAB
instruction.
Timer 3 starts counting after the following process;
set data in timer 3,
select the count source with the bits 1 and 0 of register
W3,
set the bit 3 of register W3 to “1.”
The f(XIN) or f(XIN)/2 is selected as the count source by setting
W31 to “1” and W30 to “0.”
When the f(XIN) is selected as the system clock (bit 3 of clock
control register MR= “0”), f(XIN) is selected as the count
source.
When the f(XIN)/4 is selected as the system clock (bit 3 of
clock control register MR= “1”), f(XIN)/2 is selected as the
count source.
Once count is started, when timer 3 underflows (the next count
pulse is input after the contents of timer 3 become “0”), the
timer 3 interrupt request flag (T3F) is set to “1,” new data is
loaded from reload register R3H, and count coutinues (auto-
reload function).
When the timer 3 underflows again after auto-reload is
performed, the timer 3 interrupt request flag (T3F) is set to
“1” and new data is reloaded from the reload register R3L
and count continues. Timer 3 reloads data from reload register
R3H or R3L alternately every underflow.
When the T3AB instruction is executed while timer 3 is
operating, new data is set in timer 3 and reload register R3L,
count is started again at the next machine cycle. At the next
underflow, data is reloaded from R3H and count continues
regardless that auto-reload is performed from reload register
R3H or R3L at the previous underflow.
Data can be read from timer 3 through registers A and B.
Stop counting and then execute the TAB3 instruction to read
its data. Timer 3 can be also used as the carrier wave
generating circuit.
(7) Timer output pin (D9/TOUT)
Timer output pin (D9/TOUT) is used to output the timer 2
underflow signal.
The D9/TOUT pin function can be selected by the bit 2 of register
W2.
(8) Timer interrupt request flags (T1F, T2F, T3F)
Each timer interrupt request flag is set to “1” when each timer
underflows. The state of these flags can be examined with
the skip instructions (SNZT1, SNZT2, SNZT3).
Use the interrupt control registers V1 and V2 to select an
interrupt or a skip instruction.
An interrupt request flag is cleared to “0” when an interrupt
occurs or when the next instruction is skipped with a skip
instruction.
相关PDF资料 |
PDF描述 |
|---|---|
| M34570EDFP | 4-BIT, OTPROM, MICROCONTROLLER, PDSO36 |
| M34584EDFP | 4-BIT, OTPROM, 6 MHz, MICROCONTROLLER, PDSO42 |
| M34584MD-XXXFP | 4-BIT, MROM, 6 MHz, MICROCONTROLLER, PDSO42 |
| M35017-001FP | 24 X 10 CHARACTERS CRT CHAR DSPL CTLR, PDSO20 |
| M35040-001FP | 24 X 10 CHARACTERS CRT CHAR DSPL CTLR, PDSO20 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| M34570MD | 制造商:MITSUBISHI 制造商全称:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 4-BIT CMOS MICROCOMPUTER |
| M34570MD-XXXFP | 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:SINGLE-CHIP 4-BIT CMOS MICROCOMPUTER |
| M34570N4232FP | 制造商:MITS 功能描述:New |
| M34571G4 | 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:SINGLE-CHIP 4-BIT CMOS MICROCOMPUTER |
| M34571G4FP | 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:SINGLE-CHIP 4-BIT CMOS MICROCOMPUTER |
发布紧急采购，3分钟左右您将得到回复。