- 您现在的位置：买卖IC网 > PDF目录45029 > M37161MF-XXXSP 8-BIT, MROM, 8 MHz, MICROCONTROLLER, PDIP42 PDF资料下载
参数资料
| 型号： | M37161MF-XXXSP |
| 元件分类： | 微控制器/微处理器 |
| 英文描述： | 8-BIT, MROM, 8 MHz, MICROCONTROLLER, PDIP42 |
| 封装： | 0.600 INCH, 1.78 MM PITCH, PLASTIC, SDIP-42 |
| 文件页数： | 66/129页 |
| 文件大小： | 1092K |
| 代理商： | M37161MF-XXXSP |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页第47页第48页第49页第50页第51页第52页第53页第54页第55页第56页第57页第58页第59页第60页第61页第62页第63页第64页第65页当前第66页第67页第68页第69页第70页第71页第72页第73页第74页第75页第76页第77页第78页第79页第80页第81页第82页第83页第84页第85页第86页第87页第88页第89页第90页第91页第92页第93页第94页第95页第96页第97页第98页第99页第100页第101页第102页第103页第104页第105页第106页第107页第108页第109页第110页第111页第112页第113页第114页第115页第116页第117页第118页第119页第120页第121页第122页第123页第124页第125页第126页第127页第128页第129页
Rev.1.00
2003.11.25
page 41 of 128
M37161M8/MA/MF-XXXSP/FP,M37161EFSP/FP
(3) RESTART condition generation procedure
Procedure example (The necessary conditions for the procedure
are described in to below.)
Execute the following procedure when the PIN bit is “0.”
LDM
#$00, S1
(Select slave receive mode)
LDA
—
(Take out slave address value)
SEI
(Interrupt disabled)
STA
S0
(Write slave address value)
LDM
#$F0, S1
(Trigger RESTART condition generating)
CLI
(Interrupt enabled)
Select the slave receive mode when the PIN bit is “0.” Do not write
“1” to the PIN bit. Neither “0” nor “1” is specified for the writing to
the BB bit.
The TRX bit becomes “0” and the SDA pin is released.
The SCL pin is released by writing the slave address value to the
I2C data shift register. Use “STA,” “STX” or “STY” of the zero page
addressing instruction for writing.
Use “LDM” instruction for setting trigger of RESTART condition
generation.
Write the slave address value of and set trigger of RESTART
condition generation of continuously, as shown in the above pro-
cedure example.
Disable interrupts during the following two process steps:
Write of slave address value
Trigger RESTART condition generation
(4) STOP condition generation procedure
Procedure example (The necessary conditions for the procedure
are described in to below.)
SEI
(Interrupt disabled)
LDM #$C0, S1
(Select master transmit mode)
NOP
(Set NOP)
LDM #$D0, S1
(Trigger STOP condition generation)
CLI
(Interrupt enabled)
Write “0” to the PIN bit when master transmit mode is selected.
Execute “NOP” instruction after master transmit mode is set. Also,
set trigger of STOP condition generation within 10 cycles after se-
lecting the master trasmit mode.
Disable interrupts during the following two process steps:
Select master transmit mode
Trigger STOP condition generation
(5) Writing to I2C status register
Do not execute an instruction to set the PIN bit to “1” from “0” and an
instruction to set the MST and TRX bits to “0” from “1” simultaneously
as it may cause the SCL pin the SDA pin to be released after about
one machine cycle. Also, do not execute an instruction to set the
MST and TRX bits to “0” from “1” when the PIN bit is “1,” as it may
cause the same problem.
(6) Process of after STOP condition generation
Do not write data in the I2C data shift register S0 and the I2C status
register S1 until the bus busy flag BB becomes “0” after generation
the STOP condition in the master mode. Doing so may cause the
STOP condition waveform from being generated normally. Reading
the registers does not cause the same problem.
相关PDF资料 |
PDF描述 |
|---|---|
| M37161EFSP | 8-BIT, OTPROM, 8 MHz, MICROCONTROLLER, PDIP42 |
| M37161MA-XXXSP | 8-BIT, MROM, 8 MHz, MICROCONTROLLER, PDIP42 |
| M37161M8-XXXSP | 8-BIT, MROM, 8 MHz, MICROCONTROLLER, PDIP42 |
| M37202E3SP | 8-BIT, OTPROM, 4 MHz, MICROCONTROLLER, PDIP64 |
| M37207EFFP | 8-BIT, OTPROM, 8.1 MHz, MICROCONTROLLER, PQFP80 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| M3720 | 制造商:未知厂家 制造商全称:未知厂家 功能描述:1 KEY 1 SOUND |
| M3720-1 | 制造商:未知厂家 制造商全称:未知厂家 功能描述:1 KEY 1 SOUND |
| M3720-10 | 制造商:未知厂家 制造商全称:未知厂家 功能描述:1 KEY 1 SOUND |
| M3720-2 | 制造商:未知厂家 制造商全称:未知厂家 功能描述:1 KEY 1 SOUND |
| M3720-3 | 制造商:未知厂家 制造商全称:未知厂家 功能描述:1 KEY 1 SOUND |
发布紧急采购，3分钟左右您将得到回复。