- 您现在的位置：买卖IC网 > PDF目录80496 > M37478E8TXXXSP 8-BIT, OTPROM, 8 MHz, MICROCONTROLLER, PDIP42 PDF资料下载
参数资料
| 型号： | M37478E8TXXXSP |
| 元件分类： | 微控制器/微处理器 |
| 英文描述： | 8-BIT, OTPROM, 8 MHz, MICROCONTROLLER, PDIP42 |
| 封装： | PLASTIC, SDIP-42 |
| 文件页数： | 16/48页 |
| 文件大小： | 720K |
| 代理商： | M37478E8TXXXSP |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页当前第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页第47页第48页
22
MITSUBISHI MICROCOMPUTERS
7477/ 7478 GROUP
SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
A-D CONVERTER
The A-D conversion uses an 8-bit successive comparison method.
Figure 13 shows a block diagram of the A-D conversion circuit.
Conversion is automatically carried out once started by the pro-
gram.
There are eight analog input pins which are shared with P20 to
P27 of port P2 (Only P20 to P23 4-bit for 7477 group).
Which analog inputs are to be A-D converted is specified by using
bit 2 to bit 0 in the A-D control register (address 00D916). Pins for
inputs to be A-D converted must be set for input by setting the di-
rection register bit to “0”. Bit 3 in the A-D control register is an A-D
conversion end bit. This is “0” during A-D conversion; it is set to “1“
when the conversion is terminated. Therefore, it is possible to
know whether A-D conversion is terminated by checking this bit.
Figure 14 shows the relationship between the contents of A-D
control register and the selected input pins.
Fig. 13 A-D converter circuit
The A-D conversion register (address 00DA16) contains informa-
tion on the results of conversion, so that it is possible to know the
results of conversion by reading the contents of this register.
The following explains the procedure to execute A-D conversion.
First, set values to bit 2 to bit 0 in the A-D control register to select
the pins that you want to execute A-D conversion. Next, clear the
A-D conversion end bit to “0”. When the above is done, A-D con-
version is initiated. The A-D conversion is completed after an
elapse of 50 machine cycles (12.5
s when f(XIN) = 8MHz), the A-
D conversion end bit is set to “1”, and the interrupt request bit is
set to “1”. The results of conversion are contained in the A-D con-
version register.
Comparator
A-D control circuit
Switch tree
Ladder resistor
A-D conversion
completion
interrupt request
VSS (Note 1)
VREF
1 : AVSS for M37478M4/M8/E8-XXXFP and M37478M2/M4/M8/E8TXXXFP.
2 : The 7477 group does not have P2 4/IN4 to P27/IN7 pins.
P20/IN0
P21/IN1
P22/IN2
P23/IN3
P24/IN4
P25/IN5
P26/IN6
P27/IN7
Data bus
A-D control register
(address 00D916)
bit 3
Channel
selector
Notes
bit 0
A-D conversion register
(address 00DA16)
相关PDF资料 |
PDF描述 |
|---|---|
| M38223E4FS | 8-BIT, OTPROM, 4 MHz, MICROCONTROLLER, CQCC80 |
| M38227M8HXXXFP | 8-BIT, MROM, 4 MHz, MICROCONTROLLER, PQFP80 |
| MC68HC908GR4AVFA | 8-BIT, FLASH, 8.2 MHz, MICROCONTROLLER, PDIP28 |
| MSP430G2001IRSA16 | 16-BIT, FLASH, RISC MICROCONTROLLER, PQCC16 |
| MC9S08SG32VTJ | 8-BIT, FLASH, 40 MHz, MICROCONTROLLER, PDSO20 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| M37478E8TXXXSP/FP | 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER |
| M37478E8-XXXFP | 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:8-BIT SINGLE-CHIP MICROCOMPUTER 740 FAMILY / 7470 SERIES |
| M37478E8-XXXSP | 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:8-BIT SINGLE-CHIP MICROCOMPUTER 740 FAMILY / 7470 SERIES |
| M37478E8-XXXSP/FP | 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER |
| M37478M2TXXXFP | 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:8-BIT SINGLE-CHIP MICROCOMPUTER 740 FAMILY / 7470 SERIES |
发布紧急采购，3分钟左右您将得到回复。