参数资料
型号: M37641F8HP
元件分类: 微控制器/微处理器
英文描述: 8-BIT, FLASH, 24 MHz, MICROCONTROLLER, PQFP80
封装: 12 X 12 MM, 0.50 MM PITCH, PLASTIC, LQFP-80
文件页数: 90/136页
文件大小: 1672K
代理商: M37641F8HP
57
7641 Group
SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
MITSUBISHI MICROCOMPUTERS
[USB endpoint x (x = 0 to 4) OUT Write Count Registers (Low
and High)] WRT_CNTRL, WRT_CNTH
These registers contain the number of bytes in the endpoint x
OUT FIFO. These are read-only registers. These two registers
must be read after the USB FCU has received a packet of data
from the host. When reading these registers, the lower byte must
be read first, then the higher byte.
When the OUT FIF0 is in double buffer mode, the CPU first reads
the received number of bytes of the former data packet. The next
CPU read can obtain that of the new data packet.
Fig. 51 Structure of USB endpoint x (x = 0 to 4) OUT write count registers
Low-order 8 bits of the number of bytes in endpoint x OUT FIFO
USB endpoint x OUT write count register Low (address 005D16)
WRT_CNTL
b0
b7
High-order 2 bits of the number of bytes in endpoint x OUT FIFO
Not used (“0” at read)
USB endpoint x OUT write count register High (address 005E16)
WRT_CNTH
b0
b7
[USB Endpoint x (x = 0 to 4) FIFO Register] USBFIFOx
These registers are the USB IN (transmit) and OUT (receive) FIFO
data registers. Write data to the corresponding register, and read
data from the corresponding register.
When the maximum packet size is equal to or less than half the
FIFO size, these registers function in double buffer mode and can
hold two packets of data. When the IN_PKT_RDY bit is “0” and
the TX_NOT_EMPTY bit is “1”, these bits indicate that one packet
of data is stored in the IN FIFO. When the OUT FIFO is in double
buffer mode, the OUT_PKT_RDY flag remains as “1” after the first
packet of data is read out (it actually goes to “0” and returns to “1”
after one
φ cycle).
Endpoint x IN/OUT FIFO
USB endpoint x FIFO register
(addresses 006016, 006116, 006216, 006316, 006416,)
USBFIFOx
b0
b7
Fig. 52 Structure of USB endpoint x (x = 0 to 4) FIFO register
相关PDF资料
PDF描述
MC68HC711N4CFS2 8-BIT, UVPROM, 2 MHz, MICROCONTROLLER, CQCC84
MC68HC11KS2VPU2 8-BIT, MROM, 2 MHz, MICROCONTROLLER, PQFP80
MC68HC711KS2MFN2 8-BIT, OTPROM, 2 MHz, MICROCONTROLLER, PQCC68
MB89163-PFM 8-BIT, MROM, 4.2 MHz, MICROCONTROLLER, PQFP80
MC68HC08JB8JDW 8-BIT, MROM, 3 MHz, MICROCONTROLLER, PDSO20
相关代理商/技术参数
参数描述
M37641F8HP#U0 功能描述:IC 740 MCU FLASH 32K 80LQFP RoHS:是 类别:集成电路 (IC) >> 嵌入式 - 微控制器, 系列:740/7600 产品培训模块:Graphics LCD System and PIC24 Interface Asynchronous Stimulus 标准包装:27 系列:PIC® 24H 核心处理器:PIC 芯体尺寸:16-位 速度:40 MIP 连通性:I²C,SPI,UART/USART 外围设备:欠压检测/复位,POR,PWM,WDT 输入/输出数:21 程序存储器容量:12KB(4K x 24) 程序存储器类型:闪存 EEPROM 大小:- RAM 容量:1K x 8 电压 - 电源 (Vcc/Vdd):3 V ~ 3.6 V 数据转换器:A/D 10x10b/12b 振荡器型:内部 工作温度:-40°C ~ 85°C 封装/外壳:28-SOIC(0.295",7.50mm 宽) 包装:管件 产品目录页面:648 (CN2011-ZH PDF) 配用:AC164339-ND - MODULE SKT FOR PM3 28SOICDV164033-ND - KIT START EXPLORER 16 MPLAB ICD2
M37641F8M8-XXXFP 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
M37641F8-XXXFP 制造商:MITSUBISHI 制造商全称:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
M37641F8-XXXHP 制造商:MITSUBISHI 制造商全称:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
M37641M8 制造商:MITSUBISHI 制造商全称:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER