参数资料
型号: M38227ECHP
元件分类: 微控制器/微处理器
英文描述: 8-BIT, OTPROM, 4 MHz, MICROCONTROLLER, PQFP80
封装: 12 X 12 MM, 0.50 MM PITCH, PLASTIC, QFP-80
文件页数: 46/82页
文件大小: 1168K
代理商: M38227ECHP
47
SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
3822 Group
MITSUBISHI MICROCOMPUTERS
NOTES ON USE
Countermeasures against noise
(1) Shortest wiring length
Wiring for RESET pin
Make the length of wiring which is connected to the RESET pin
as short as possible. Especially, connect a capacitor across the
RESET pin and the VSS pin with the shortest possible wiring
(within 20mm).
q Reason
The width of a pulse input into the RESET pin is determined by
the timing necessary conditions. If noise having a shorter pulse
width than the standard is input to the RESET pin, the reset is
released before the internal state of the microcomputer is com-
pletely initialized. This may cause a program runaway.
(2) Connection of bypass capacitor across VSS line and VCC line
In order to stabilize the system operation and avoid the latch-up,
connect an approximately 0.1
F bypass capacitor across the VSS
line and the VCC line as follows:
Connect a bypass capacitor across the VSS pin and the VCC pin
at equal length.
Connect a bypass capacitor across the VSS pin and the VCC pin
with the shortest possible wiring.
Use lines with a larger diameter than other signal lines for VSS
line and VCC line.
Connect the power source wiring via a bypass capacitor to the
VSS pin and the VCC pin.
Wiring for clock input/output pins
Make the length of wiring which is connected to clock I/O pins
as short as possible.
Make the length of wiring (within 20 mm) across the grounding
lead of a capacitor which is connected to an oscillator and the
VSS pin of a microcomputer as short as possible.
Separate the VSS pattern only for oscillation from other VSS
patterns.
q Reason
If noise enters clock I/O pins, clock waveforms may be de-
formed. This may cause a program failure or program runaway.
Also, if a potential difference is caused by the noise between
the VSS level of a microcomputer and the VSS level of an oscil-
lator, the correct clock will not be input in the microcomputer.
RESET
Reset
circuit
Noise
VSS
Reset
circuit
VSS
RESET
VSS
N.G.
O.K.
Noise
XIN
XOUT
VSS
XIN
XOUT
VSS
N.G.
O.K.
VSS
VCC
VSS
VCC
N.G.
O.K.
Fig. 47 Wiring for clock I/O pins
Fig. 46 Wiring for the RESET pin
Fig. 48 Bypass capacitor across the VSS line and the VCC line
相关PDF资料
PDF描述
M37478M8TXXXFP 8-BIT, MROM, 8 MHz, MICROCONTROLLER, PQFP56
M38203E4-XXXHP 8-BIT, OTPROM, 4 MHz, MICROCONTROLLER, PQFP80
M38503E4-XXXFP 8-BIT, OTPROM, 4 MHz, MICROCONTROLLER, PDSO42
MB90347EPFV MICROCONTROLLER, PQFP100
MB96F346RSAPMC-GE2 16-BIT, FLASH, 56 MHz, MICROCONTROLLER, PQFP100
相关代理商/技术参数
参数描述
M38227FGFP 制造商:Renesas Electronics Corporation 功能描述:SLIM740 OTP 16K/512B RAM, W/A-D, LED, 4 - Rail/Tube
M38227RFS 制造商:Renesas Electronics Corporation 功能描述:MCU - Trays
M3823 BK001 制造商:Alpha Wire Company 功能描述:CBL 30COND 18AWG BLK 1000'
M3823 BK002 制造商:Alpha Wire Company 功能描述:CBL 30COND 18AWG BLK 500'
M3823 BK005 制造商:Alpha Wire Company 功能描述:CBL 30COND 18AWG BLK 100'