参数资料
型号: M38227ECHP
元件分类: 微控制器/微处理器
英文描述: 8-BIT, OTPROM, 4 MHz, MICROCONTROLLER, PQFP80
封装: 12 X 12 MM, 0.50 MM PITCH, PLASTIC, QFP-80
文件页数: 6/82页
文件大小: 1168K
代理商: M38227ECHP
11
SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
3822 Group
MITSUBISHI MICROCOMPUTERS
FUNCTIONAL DESCRIPTION
CENTRAL PROCESSING UNIT (CPU)
The 3822 group uses the standard 740 family instruction set. Re-
fer to the table of 740 family addressing modes and machine
instructions or the 740 Family Software Manual for details on the
instruction set.
Machine-resident 740 family instructions are as follows:
The FST and SLW instruction cannot be used.
The STP, WIT, MUL, and DIV instruction can be used.
[Accumulator (A)]
The accumulator is an 8-bit register. Data operations such as data
transfer, etc., are executed mainly through the accumulator.
[Index Register X (X)]
The index register X is an 8-bit register. In the index addressing
modes, the value of the OPERAND is added to the contents of
register X and specifies the real address.
[Index Register Y (Y)]
The index register Y is an 8-bit register. In partial instruction, the
value of the OPERAND is added to the contents of register Y and
specifies the real address.
[Stack Pointer (S)]
The stack pointer is an 8-bit register used during subroutine calls
and interrupts. This register indicates start address of stored area
(stack) for storing registers during subroutine calls and interrupts.
The low-order 8 bits of the stack address are determined by the
contents of the stack pointer. The high-order 8 bits of the stack ad-
dress are determined by the stack page selection bit. If the stack
page selection bit is “0” , the high-order 8 bits becomes “0016”. If
the stack page selection bit is “1”, the high-order 8 bits becomes
“0116”.
The operations of pushing register contents onto the stack and
popping them from the stack are shown in Figure 10.
Store registers other than those described in Figure 10 with pro-
gram when the user needs them during interrupts or subroutine
calls.
[Program Counter (PC)]
The program counter is a 16-bit counter consisting of two 8-bit
registers PCH and PCL. It is used to indicate the address of the
next instruction to be executed.
Fig.9 740 Family CPU register structure
A
Accumulator
b7
b0
b7
b15
b0
b7
b0
X
Index register X
Y
Index register Y
S
Stack pointer
PCL
Program counter
PCH
N V T B D I Z C
Processor status register (PS)
Carry flag
Zero flag
Interrupt disable flag
Decimal mode flag
Break flag
Index X mode flag
Overflow flag
Negative flag
相关PDF资料
PDF描述
M37478M8TXXXFP 8-BIT, MROM, 8 MHz, MICROCONTROLLER, PQFP56
M38203E4-XXXHP 8-BIT, OTPROM, 4 MHz, MICROCONTROLLER, PQFP80
M38503E4-XXXFP 8-BIT, OTPROM, 4 MHz, MICROCONTROLLER, PDSO42
MB90347EPFV MICROCONTROLLER, PQFP100
MB96F346RSAPMC-GE2 16-BIT, FLASH, 56 MHz, MICROCONTROLLER, PQFP100
相关代理商/技术参数
参数描述
M38227FGFP 制造商:Renesas Electronics Corporation 功能描述:SLIM740 OTP 16K/512B RAM, W/A-D, LED, 4 - Rail/Tube
M38227RFS 制造商:Renesas Electronics Corporation 功能描述:MCU - Trays
M3823 BK001 制造商:Alpha Wire Company 功能描述:CBL 30COND 18AWG BLK 1000'
M3823 BK002 制造商:Alpha Wire Company 功能描述:CBL 30COND 18AWG BLK 500'
M3823 BK005 制造商:Alpha Wire Company 功能描述:CBL 30COND 18AWG BLK 100'