参数资料
型号: M48T02-200PC1
厂商: STMICROELECTRONICS
元件分类: 时钟/数据恢复及定时提取
英文描述: 0 TIMER(S), REAL TIME CLOCK, PDIP24
封装: 0.600 INCH, ROHS COMPLIANT, PLASTIC, DIP-24
文件页数: 6/25页
文件大小: 199K
代理商: M48T02-200PC1
Clock operations
M48T02, M48T12
'1' indicates positive calibration, '0' indicates negative calibration. Calibration occurs within a
64 minute cycle. The first 62 minutes in the cycle may, once per minute, have one second
either shortened by 128 or lengthened by 256 oscillator cycles. If a binary '1' is loaded into
the register, only the first 2 minutes in the 64 minute cycle will be modified; if a binary 6 is
loaded, the first 12 will be affected, and so on.
Therefore, each calibration step has the effect of adding 512 or subtracting 256 oscillator
cycles for every 125,829,120 actual oscillator cycles; that is +4.068 or –2.034 ppm of
adjustment per calibration step in the calibration register. Assuming that the oscillator is in
fact running at exactly 32,768 Hz, each of the 31 increments in the calibration byte would
represent +10.7 or –5.35 seconds per month which corresponds to a total range of +5.5 or
–2.75 minutes per month.
Two methods are available for ascertaining how much calibration a given M48T02/12 may
require. The first involves simply setting the clock, letting it run for a month and comparing it
to a known accurate reference (like WWV broadcasts). While that may seem crude, it allows
the designer to give the end user the ability to calibrate his clock as his environment may
require, even after the final product is packaged in a non-user serviceable enclosure. All the
designer has to do is provide a simple utility that accesses the calibration byte.
The second approach is better suited to a manufacturing environment, and involves the use
of some test equipment. When the Frequency Test (FT) bit, the seventh-most significant bit
in the day register, is set to a '1,' and the oscillator is running at 32,768 Hz, the LSB (DQ0) of
the seconds register will toggle at 512 Hz. Any deviation from 512 Hz indicates the degree
and direction of oscillator frequency shift at the test temperature. For example, a reading of
512.01024 Hz would indicate a +20 ppm oscillator frequency error, requiring
–10 (WR001010) to be loaded into the calibration byte for correction.
Note:
Setting or changing the calibration byte does not affect the frequency test output frequency.
The device must be selected and addresses must be stable at address 7F9 when reading
the 512 Hz on DQ0.
The FT bit must be set using the same method used to set the clock: using the WRITE bit.
The LSB of the seconds register is monitored by holding the M48T02/12 in an extended
READ of the seconds register, but without having the READ bit set. The FT bit MUST be
reset to '0' for normal clock operations to resume.
Note:
It is not necessary to set the WRITE bit when setting or resetting the frequency test bit (FT)
or the stop bit (ST).
For more information on calibration, see the application note AN924, “TIMEKEEPER
calibration.”
相关PDF资料
PDF描述
M48T35Y-70PC1 0 TIMER(S), REAL TIME CLOCK, PDIP28
M48T559YMH1TR 0 TIMER(S), REAL TIME CLOCK, PDSO28
M37212M6-XXXSP 8-BIT, MROM, MICROCONTROLLER, PDIP52
M38223M4-XXXHP 8-BIT, MROM, 8 MHz, MICROCONTROLLER, PQFP80
M38044M4-XXXSP 8-BIT, MROM, 16.8 MHz, MICROCONTROLLER, PDIP64
相关代理商/技术参数
参数描述
M48T02-200PC1 制造商:STMicroelectronics 功能描述:IC SRAM TIMEKEEPER 16K
M48T02-200PC1TR 制造商:STMICROELECTRONICS 制造商全称:STMicroelectronics 功能描述:5.0V, 16 Kbit (2Kb x 8) TIMEKEEPER㈢ SRAM
M48T02-70PC1 功能描述:实时时钟 16K (2Kx8) 70ns RoHS:否 制造商:Microchip Technology 功能:Clock, Calendar. Alarm RTC 总线接口:I2C 日期格式:DW:DM:M:Y 时间格式:HH:MM:SS RTC 存储容量:64 B 电源电压-最大:5.5 V 电源电压-最小:1.8 V 最大工作温度:+ 85 C 最小工作温度: 安装风格:Through Hole 封装 / 箱体:PDIP-8 封装:Tube
M48T02-70PC1 制造商:STMicroelectronics 功能描述:IC NVRAM 10 YR BATTERY 16K 48T02
M48T02-70PC1TR 制造商:STMICROELECTRONICS 制造商全称:STMicroelectronics 功能描述:5.0V, 16 Kbit (2Kb x 8) TIMEKEEPER㈢ SRAM