- 您现在的位置：买卖IC网 > PDF目录1836 > MAX15020ATP+T (Maxim Integrated Products)IC REG BUCK ADJ 2A 20TQFN PDF资料下载
参数资料
| 型号： | MAX15020ATP+T |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 8/18页 |
| 文件大小： | 0K |
| 描述： | IC REG BUCK ADJ 2A 20TQFN |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 2,500 |
| 类型： | 降压（降压） |
| 输出类型： | 可调式 |
| 输出数： | 1 |
| 输出电压： | 0.5 V ~ 36 V |
| 输入电压： | 7.5 V ~ 40 V |
| PWM 型： | 电压模式 |
| 频率 - 开关： | 300kHz ~ 500kHz |
| 电流 - 输出： | 2A |
| 同步整流器： | 无 |
| 工作温度： | -40°C ~ 125°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 20-WQFN 裸露焊盘 |
| 包装： | 带卷 (TR) |
| 供应商设备封装： | 20-TQFN-EP（5x5） |
2A, 40V Step-Down DC-DC Converter with
Dynamic Output-Voltage Programming
Pin Description
PIN
1
2
3
4
5
6
7
8
9
10
11
12
13, 14, 15
16, 17, 18
19
20
—
NAME
COMP
FB
ON/ OFF
REFOUT
SS
REFIN
FSEL
SYNC
DVREG
PGND
N.C.
BST
LX
IN
REG
GND
EP
FUNCTION
Voltage-Error-Amplifier Output. Connect COMP to the necessary compensation feedback network.
Feedback Regulation Point. Connect to the center tap of an external resistor-divider connected between
the output and GND to set the output voltage. The FB voltage regulates to the voltage applied to REFIN.
ON/ OFF Control. The ON/ OFF rising threshold is set to approximately 1.225V. Connect to the center tap of
a resistive divider connected between IN and GND to set the turn-on (rising) threshold. Connect ON/ OFF to
GND to shut down the IC. Connect ON/ OFF to IN for always-on operation given that V IN has risen above the
UVLO threshold. ON/ OFF can be used for power-supply sequencing.
0.98V Reference Voltage Output. Bypass REFOUT to GND with a 0.1μF ceramic capacitor. REFOUT is to
be used only with REFIN. It is not to be used to power any other external circuitry.
Soft-Start. Connect a 0.01μF or greater ceramic capacitor from SS to GND. See the Soft-Start (SS) section.
External Reference Input. Connect to an external reference. V FB regulates to the voltage applied to REFIN.
Connect REFIN to REFOUT to use the internal 1V reference. See the Reference Input and Output (REFIN,
REFOUT) section.
Internal Switching Frequency Selection Input. Connect FSEL to REG to select f SW = 300kHz. Connect FSEL
to GND to select f SW = 500kHz. When an external clock is connected to SYNC connect FSEL to REG.
Oscillator Synchronization Input. SYNC can be driven by an external 100kHz to 500kHz clock to
synchronize the MAX15020’s switching frequency. Connect SYNC to GND to disable the synchronization
function. When using SYNC, connect FSEL to REG.
Power Supply for Internal Digital Circuitry. Connect a 10 ? resistor from REG to DVREG. Connect DVREG to
the anode of the boost diode, D2 in Figure 2. Bypass DVREG to GND with at least a 1μF ceramic capacitor.
Power-Ground Connection. Connect the input filter capacitor’s negative terminal, the anode of the
freewheeling diode, and the output filter capacitor’s return to PGND. Connect externally to GND at a single
point near the input bypass capacitor’s return terminal.
No Connection. Leave unconnected or connect to GND
High-Side Gate Driver Supply. Connect BST to the cathode of the boost diode and to the positive terminal
of the boost capacitor.
Source Connection of Internal High-Side Switch. Connect the inductor and rectifier diode’s cathode to LX.
Supply Input Connection. Connect to an external voltage source from 7.5V to 40V.
8V Internal Regulator Output. Bypass to GND with at least a 1μF ceramic capacitor. Do not use REG to
power external circuitry.
Ground Connection. Solder the exposed pad to a large GND plane. Connect GND and PGND together at
one point near the input bypass capacitor return terminal.
Exposed Pad. Connect EP to GND. Connecting EP does not remove the requirement for proper ground
connections to the appropriate pins. See the PCB Layout and Routing section.
8
_______________________________________________________________________________________
相关PDF资料 |
PDF描述 |
|---|---|
| MAX15021ATI+T | IC REG BUCK SYNC ADJ DL 28TQFN |
| MAX15023ETG+ | IC REG CTRLR BUCK PWM 24TQFNEP |
| MAX15026CATD+T | IC REG CTRLR BUCK PWM VM 14TDFN |
| MAX15027ATB+T | IC REG LDO ADJ 1A 10-TDFN |
| MAX15030ATB+T | IC REG LDO ADJ .5A 10-TDFN |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MAX15020EVKIT+ | 功能描述:电源管理IC开发工具 MAX15020 Eval Kit RoHS:否 制造商:Maxim Integrated 产品:Evaluation Kits 类型:Battery Management 工具用于评估:MAX17710GB 输入电压: 输出电压:1.8 V |
| MAX15021ATB+ | 功能描述:直流/直流开关调节器 DUAL 4A/2A RoHS:否 制造商:International Rectifier 最大输入电压:21 V 开关频率:1.5 MHz 输出电压:0.5 V to 0.86 V 输出电流:4 A 输出端数量: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:PQFN 4 x 5 |
| MAX15021ATI/V+ | 制造商:Maxim Integrated Products 功能描述:DUAL, 4A/2A, 4MHZ, STEP-DOWN DC-DCREGULATOR WITH TRACKING/SE - Rail/Tube |
| MAX15021ATI/V+T | 制造商:Maxim Integrated Products 功能描述:DUAL, 4A/2A, 4MHZ, STEP-DOWN DC-DCREGULATOR WITH TRACKING/SE - Tape and Reel |
| MAX15021ATI+ | 功能描述:直流/直流开关调节器 Dual 4A/2A 4MHz w/Tracking/Seq RoHS:否 制造商:International Rectifier 最大输入电压:21 V 开关频率:1.5 MHz 输出电压:0.5 V to 0.86 V 输出电流:4 A 输出端数量: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:PQFN 4 x 5 |
发布紧急采购，3分钟左右您将得到回复。