- 您现在的位置：买卖IC网 > PDF目录1836 > MAX15041ETE+T (Maxim Integrated Products)IC REG BUCK SYNC ADJ 3A 16TQFN PDF资料下载
参数资料
| 型号： | MAX15041ETE+T |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 10/18页 |
| 文件大小： | 0K |
| 描述： | IC REG BUCK SYNC ADJ 3A 16TQFN |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 2,500 |
| 类型： | 降压（降压） |
| 输出类型： | 可调式 |
| 输出数： | 1 |
| 输出电压： | 0.6 V ~ 25.2 V |
| 输入电压： | 4.5 V ~ 28 V |
| PWM 型： | 电流模式 |
| 频率 - 开关： | 350kHz |
| 电流 - 输出： | 3A |
| 同步整流器： | 是 |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 16-WFQFN 裸露焊盘 |
| 包装： | 带卷 (TR) |
| 供应商设备封装： | 16-TQFN-EP（3x3） |
Low-Cost, 3A, 4.5V to 28V Input, 350kHz, PWM
Step-Down DC-DC Regulator with Internal Switches
Detailed Description
The MAX15041 is a high-efficiency, peak-current-
mode, step-down DC-DC converter with integrated
high-side (170m ? , typ) and low-side (105m ? , typ)
power switches. The output voltage is set from 0.606V
to 0.9 x V IN by using an adjustable, external resistive
divider and can deliver up to 3A load current. The 4.5V
to 28V input voltage range makes the device ideal for
distributed power systems, notebook computers, and
preregulation applications.
The MAX15041 features a PWM, internally fixed 350kHz
switching frequency with a 90% maximum duty cycle.
PWM current-mode control allows for an all-ceramic
capacitor solution. The MAX15041 comes with a high-
gain transconductance error amplifier. The current-
mode control architecture simplifies compensation
design and ensures a cycle-by-cycle current limit and
fast reaction to line and load transients. The low
R DS-ON , on-chip, MOSFET switches ensure high effi-
ciency at heavy loads and minimize critical induc-
tances, reducing layout sensitivity.
The MAX15041 also features thermal shutdown and
overcurrent protection (high-side sourcing and low-side
sinking), and an internal 5V, LDO with undervoltage
lockout. An externally adjustable voltage soft-start
gradually ramps up the output voltage and reduces
inrush current. Independent enable control and power-
good signals allow for flexible power sequencing. The
MAX15041 also provides the ability to start up into a
prebiased output, below or above the set point.
Controller Function—PWM Logic
The MAX15041 operates at a constant 350kHz switch-
ing frequency. When EN is high, after a brief settling
time, PWM operation starts when V SS crosses the FB
voltage, at the beginning of soft-start.
The first operation is always a high-side MOSFET turn-
on, at the beginning of the clock cycle. The high-side
MOSFET is turned off when:
1) COMP voltage crosses the internal current-mode
ramp waveform, which is the sum of the compensa-
tion ramp and the current-mode ramp derived from
the inductor current waveform (current-sense block).
2) The high-side MOSFET current limit is reached.
3) The maximum duty cycle of 90% is reached.
Then, the low-side MOSFET turns on; the low-side
MOSFET turns off when the clock period ends.
Starting into a Prebiased Output
The MAX15041 is capable of safely soft-starting into a
prebiased output without discharging the output
capacitor. Starting up into a prebiased condition, both
low-side and high-side MOSFETs remain off to avoid
discharging the prebiased output. PWM operation
starts only when the SS voltage crosses the FB voltage.
The MAX15041 is also capable of soft-starting into an
output prebiased above the OUT nominal set point. In
this case, forced PWM operation starts when SS volt-
age reaches 0.65V (typ).
In case of a prebiased output, below or above the OUT
nominal set point, if the low-side MOSFET sink current
reaches the sink current limit (-3A, typ), the low-side
MOSFET turns off before the end of the clock period
and the high-side MOSFET turns on until one of the fol-
lowing conditions happens:
1) High-side MOSFET source current hits the reduced
high-side MOSFET current limit (0.75A, typ); in this
case, the high-side MOSFET is turned off for the
remaining clock period.
2) The clock period ends.
Enable Input and Power-Good Output
The MAX15041 features independent device enable
control and power-good signals that allow for flexible
power sequencing. The enable input (EN) is an input
with a 1.95V (typ) threshold that controls the regulator.
Assert a voltage exceeding the threshold on EN to
enable the regulator, or connect EN to IN for always-on
operations. Power-good (PGOOD) is an open-drain
output that deasserts (goes high impedance) when V FB
is above 560mV (typ), and asserts low if V FB is below
545mV (typ).
When the EN voltage is higher than 1.4V (typ) and
lower than 1.95V (typ), most of the internal blocks are
disabled, only an internal coarse preregulator, includ-
ing the EN accurate comparator, is kept on.
10
______________________________________________________________________________________
相关PDF资料 |
PDF描述 |
|---|---|
| MAX15046AAEE+T | IC REG CTRLR BUCK PWM VM 16-QSOP |
| MAX15049ETJ+ | IC CTRLR PWM STP-DN TRIPL 32WQFN |
| MAX15053AEWL+T | IC REG BUCK SYNC ADJ 2A 9WLP |
| MAX15058EWL+T | IC REG BUCK SYNC ADJ 3A 9WLP |
| MAX15059BETE+ | IC REG CONV 76V APD 16TQFN |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MAX15041EVKIT+ | 功能描述:电源管理IC开发工具 3A 350kHz Step-Down w/Internal Switch RoHS:否 制造商:Maxim Integrated 产品:Evaluation Kits 类型:Battery Management 工具用于评估:MAX17710GB 输入电压: 输出电压:1.8 V |
| MAX15046AAEE+ | 功能描述:DC/DC 开关控制器 40V Synchronous Buck Controller RoHS:否 制造商:Texas Instruments 输入电压:6 V to 100 V 开关频率: 输出电压:1.215 V to 80 V 输出电流:3.5 A 输出端数量:1 最大工作温度:+ 125 C 安装风格: 封装 / 箱体:CPAK |
| MAX15046AAEE+T | 功能描述:DC/DC 开关控制器 40V Synchronous Buck Controller RoHS:否 制造商:Texas Instruments 输入电压:6 V to 100 V 开关频率: 输出电压:1.215 V to 80 V 输出电流:3.5 A 输出端数量:1 最大工作温度:+ 125 C 安装风格: 封装 / 箱体:CPAK |
| MAX15046AEEE+ | 功能描述:DC/DC 开关控制器 RoHS:否 制造商:Texas Instruments 输入电压:6 V to 100 V 开关频率: 输出电压:1.215 V to 80 V 输出电流:3.5 A 输出端数量:1 最大工作温度:+ 125 C 安装风格: 封装 / 箱体:CPAK |
| MAX15046AEEE+T | 功能描述:DC/DC 开关控制器 RoHS:否 制造商:Texas Instruments 输入电压:6 V to 100 V 开关频率: 输出电压:1.215 V to 80 V 输出电流:3.5 A 输出端数量:1 最大工作温度:+ 125 C 安装风格: 封装 / 箱体:CPAK |
发布紧急采购，3分钟左右您将得到回复。