- 您现在的位置：买卖IC网 > PDF目录1836 > MAX15061ATE+ (Maxim Integrated Products)IC BOOST CONV/CURR MON 16-TQFN PDF资料下载
参数资料
| 型号： | MAX15061ATE+ |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 9/16页 |
| 文件大小： | 0K |
| 描述： | IC BOOST CONV/CURR MON 16-TQFN |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 75 |
| 应用： | 电流/电源监控器 |
| 电流 - 电源： | 1.2mA |
| 电源电压： | 2.7 V ~ 5.5 V |
| 工作温度： | -40°C ~ 125°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 16-WQFN 裸露焊盘 |
| 供应商设备封装： | 16-TQFN-EP（4x4） |
| 包装： | 管件 |
80V, 300mW Boost Converter and Current
Monitor for APD Bias Applications
Pin Description
PIN
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
—
NAME
PWR
CP
CN
IN
SGND
FB
CNTRL
ILIM
RLIM
MOUT
CLAMP
APD
BIAS
SHDN
PGND
LX
EP
FUNCTION
Boost Converter Input Voltage. PWR powers the switch driver and charge pump. Bypass PWR to PGND with a
ceramic capacitor of 1μF minimum value.
Positive Terminal of the Charge-Pump Flying Capacitor for 2.7V to 5.5V Supply Voltage Operation. Connect
CP to IN when the input voltage is in the 5.5V to 11V range.
Negative Terminal of the Charge-Pump Flying Capacitor for 2.7V to 5.5V Supply Voltage Operation. Leave CN
unconnected when the input voltage is in the 5.5V to 11V range.
Input Supply Voltage. IN powers all blocks of the MAX15061 except the switch driver and charge pump.
Bypass IN to PGND with a ceramic capacitor of 1μF minimum value.
Signal Ground. Connect directly to the local ground plane. Connect SGND to PGND at a single point, typically
near the return terminal of the output capacitor.
Feedback Regulation Input. Connect FB to the center tap of a resistive voltage-divider from the output (V OUT )
to SGND to set the output voltage. The FB voltage regulates to 1.245V (typ) when V CNTRL is above 1.5V (typ)
and to V CNTRL voltage when V CNTRL is below 1.245V (typ).
Control Input for Boost Converter Output-Voltage Programmability. Allows the feedback set-point voltage to be
set externally by CNTRL when CNTRL is less than 1.245V. Pull CNTRL above 1.5V (typ) to use the internal
1.245V (typ) feedback set-point voltage.
Open-Drain Current-Limit Indicator. ILIM asserts low when the APD current limit has been exceeded.
Current-Limit Resistor Connection. Connect a resistor from RLIM to SGND to program the APD current-limit
threshold.
Current-Monitor Output. MOUT sources a current 1/10 of I APD .
Clamp Voltage Input. CLAMP is the external potential used for voltage clamping of MOUT.
Reference Current Output. APD provides the source current to the cathode of the photodiode.
Bias Voltage Input. Connect BIAS to the boost converter output (V OUT ) either directly or through a lowpass
filter for ripple attenuation. BIAS provides the voltage bias for the current monitor and is the current source for
APD.
Active-Low Shutdown Control Input. Apply a logic-low voltage to SHDN to shut down the device and reduce
the supply current to 2μA (max). Connect SHDN to IN for normal operation. Ensure that V SHDN is not greater
than the input voltage, V IN .
Power Ground. Connect the negative terminals of the input and output capacitors to PGND. Connect PGND
externally to SGND at a single point, typically at the return terminal of the output capacitor.
Drain of Internal 80V n-Channel DMOS. Connect inductor and diode to LX. Minimize the trace area at LX to
reduce switching noise emission.
Exposed Pad. Connect EP to a large contiguous copper plane at SGND potential to improve thermal
dissipation. Do not use as the main SGND connection.
_______________________________________________________________________________________
9
相关PDF资料 |
PDF描述 |
|---|---|
| MAX15066EWE+T | IC REG BUCK SYNC ADJ 4A 16WLP |
| MAX1507ETA+T | IC BATT CHARGER LI-ION 8-TDFN |
| MAX1508ZETA+T | IC BATT CHARGER LI-ION 8-TDFN |
| MAX15101EWL+T | IC REG LDO ADJ 1A 15WLP |
| MAX15102EWL+T | IC REG LDO ADJ 2A 15WLP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MAX15061ATE+ | 功能描述:直流/直流开关转换器 80V 300mW Boost Converter RoHS:否 制造商:STMicroelectronics 最大输入电压:4.5 V 开关频率:1.5 MHz 输出电压:4.6 V 输出电流:250 mA 输出端数量:2 最大工作温度:+ 85 C 安装风格:SMD/SMT |
| MAX15061ATE+T | 功能描述:直流/直流开关转换器 80V 300mW Boost Converter RoHS:否 制造商:STMicroelectronics 最大输入电压:4.5 V 开关频率:1.5 MHz 输出电压:4.6 V 输出电流:250 mA 输出端数量:2 最大工作温度:+ 85 C 安装风格:SMD/SMT |
| MAX15062AATA+ | 制造商:Maxim Integrated Products 功能描述:- Rail/Tube |
| MAX15062AATA+T | 功能描述:直流/直流开关调节器 36V 300mA Synchronous RoHS:否 制造商:International Rectifier 最大输入电压:21 V 开关频率:1.5 MHz 输出电压:0.5 V to 0.86 V 输出电流:4 A 输出端数量: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:PQFN 4 x 5 |
| MAX15062ATA+ | 制造商:Maxim Integrated Products 功能描述:- Rail/Tube |
发布紧急采购，3分钟左右您将得到回复。