- 您现在的位置：买卖IC网 > PDF目录20781 > MAX16826ATJ+ (Maxim Integrated)IC LED DVR HB PROGR 32TQFN-EP PDF资料下载
参数资料
| 型号： | MAX16826ATJ+ |
| 厂商： | Maxim Integrated |
| 文件页数： | 9/26页 |
| 文件大小： | 0K |
| 描述： | IC LED DVR HB PROGR 32TQFN-EP |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 60 |
| 恒定电流： | 是 |
| 拓扑： | PWM，SEPIC，升压（升压） |
| 输出数： | 4 |
| 内部驱动器： | 无 |
| 类型 - 主要： | 车载，背光 |
| 类型 - 次要： | 高亮度 LED（HBLED），RGB，白色 LED |
| 频率： | 100kHz ~ 1MHz |
| 电源电压： | 4.75 V ~ 24 V |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 32-WFQFN 裸露焊盘 |
| 供应商设备封装： | 32-TQFN-EP |
| 包装： | 托盘 |
| 工作温度： | -40°C ~ 125°C |
MAX16826
Programmable, Four-String HB LED Driver with
Output-Voltage Optimization and Fault Detection
Pin Description (continued)
PIN
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
—
NAME
DL1
DR1
CS2
DL2
DR2
CS3
DL3
DR3
CS4
DL4
DR4
IN
CS
V CC
DL
EP
FUNCTION
LED String 1 Linear Current Source Output. DL1 drives the gate of the external FET on LED String 1 and has
approximately 15mA source/sink capability. Connect a minimum capacitor of 4700pF from DL1 to GND to
compensate the internal transconductance amplifier as well as program the rise and fall times of the LED currents.
LED String 1 External FET Drain Voltage Sense. The internal ADC uses this input to measure the drain to GND
voltage of the current sink FET. Drain voltage measurement information can be read back from the I 2 C
interface. Connect a voltage-divider to scale drain voltage as necessary.
LED String 2 Current-Sense Input. CS2 is regulated to a value set by an internal register. The regulation voltage
can be set between 97mV and 316mV.
LED String 2 Linear Current Source Output. DL2 drives the gate of the external FET on LED String 2 and has
approximately 15mA source/sink capability. Connect a minimum capacitor of 4700pF from DL2 to GND to
compensate the internal transconductance amplifier, as well as program the rise and fall times of the LED
currents.
LED String 2 External FET Drain Voltage Sense. The internal ADC uses this input to measure the drain to GND
voltage of the current sink FET. Drain voltage measurement information can be read back from the I 2 C
interface. Connect a voltage-divider to scale drain voltage as necessary.
LED String 3 Current-Sense Input. CS3 is regulated to a value set by an internal register. The regulation voltage
can be set between 97mV and 316mV.
LED String 3 Linear Current Source Output. DL3 drives the gate of the external FET on LED String 3 and has
approximately 15mA source/sink capability. Connect a minimum capacitor of 4700pF from DL3 to GND to
compensate the internal transconductance amplifier, as well as program the rise and fall times of the LED currents.
LED String 3 External FET Drain Voltage Sense. The internal ADC uses this input to measure the drain to GND
voltage of the current sink FET. Drain voltage measurement information can be read back from the I 2 C
interface. Connect a voltage-divider to scale drain voltage as necessary.
LED String 4 Current-Sense Input. CS4 is regulated to a value set by an internal register. The regulation voltage
can be set between 97mV and 316mV.
LED String 4 Linear Current Source Output. DL3 drives the gate of the external FET on LED String 4 and has
approximately 15mA source/sink capability. Connect a minimum capacitor of 4700pF from DL4 to GND to
compensate the internal transconductance amplifier, as well as program the rise and fall times of the LED currents.
LED String 4 External FET Drain Voltage Sense. The internal ADC uses this input to measure the drain to GND
voltage of the current sink FET. Drain voltage measurement information can be read back from the I 2 C
interface. Connect a voltage-divider to scale drain voltage as necessary.
Power Supply. IN is internally connected to a 26V shunt regulator that sinks current. In conjunction with an
external resistor it allows time-limited load dump events as high as 40V to be safely handled by the IC. Bypass
IN to GND with a minimum 10μF capacitor.
Current-Sense Input
Gate Driver Regulator Output. Bypass V CC to GND with a minimum 4.7μF ceramic capacitor. Gate drive current
pulses come from the capacitor connected to V CC . Place the capacitor as close as possible to V CC . If IN is
powered by a voltage less than 5.5V, connect V CC directly to IN.
Switching Regulator Gate Driver Output
Exposed Pad. Connect the exposed pad to the ground plane for heatsinking. Do not use this pad as the only
ground connection to the IC.
Maxim Integrated
9
相关PDF资料 |
PDF描述 |
|---|---|
| MAX16821CATI+ | IC LED DRIVR HIGH BRIGHT 28-TQFN |
| MAX16821BATI+ | IC LED DRIVR HIGH BRIGHT 28-TQFN |
| LQP03TN3N9C00D | INDUCTOR 3.9NH 170MA 0201 |
| MAX7302AEE+ | IC LED DRIVER LINEAR 16-QSOP |
| GBC10DCAD | CONN EDGECARD 20POS R/A .100 SLD |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MAX16826ATJ/V+ | 制造商:Maxim Integrated Products 功能描述:PROGRAMMABLE, FOUR-STRING HB LED DRIVER WITH OUTPUT-VOLTAGE - Rail/Tube |
| MAX16826ATJ/V+T | 制造商:Maxim Integrated Products 功能描述:PROGRAMMABLE, FOUR-STRING HB LED DRIVER WITH OUTPUT-VOLTAGE - Tape and Reel |
| MAX16826ATJ/VY+ | 制造商:Maxim Integrated Products 功能描述:PROGRAMMABLE, FOUR-STRING HB LED DRIVER WITH OUTPUT-VOLTAGE - Rail/Tube |
| MAX16826ATJ/VY+T | 制造商:Maxim Integrated Products 功能描述:PROGRAMMABLE, FOUR-STRING HB LED DRIVER WITH OUTPUT-VOLTAGE - Tape and Reel |
| MAX16826ATJ+ | 功能描述:LED照明驱动器 Prog 4-String HB RoHS:否 制造商:STMicroelectronics 输入电压:11.5 V to 23 V 工作频率: 最大电源电流:1.7 mA 输出电流: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:SO-16N |
发布紧急采购，3分钟左右您将得到回复。