参数资料
型号: MAX3107EAG+
厂商: Maxim Integrated Products
文件页数: 17/52页
文件大小: 0K
描述: IC UART SPI/I2C 128 FIFO 24SSOP
产品培训模块: Lead (SnPb) Finish for COTS
Obsolescence Mitigation Program
标准包装: 58
特点: 内部振荡器
通道数: 4,QUART
FIFO's: 128 字节
规程: RS232,RS485
电源电压: 2.35 V ~ 3.6 V
带自动流量控制功能:
带IrDA 编码器/解码器:
带故障启动位检测功能:
安装类型: 表面贴装
封装/外壳: 24-SSOP(0.209",5.30mm 宽)
供应商设备封装: 24-SSOP
包装: 管件
SPI/I2C UART with 128-Word FIFOs
Bits 7–0: TData[7:0]
The THR is the register that the host controller writes data to for subsequent UART transmission. This data is deposited
in the transmit FIFO. THR[0] is the LSB. It is the first data bit of the serial-data word that the transmitter sends out, right
after the START bit.
The IRQEn is used to enable the IRQ physical interrupt. Any of the eight ISR interrupt sources can be enabled to gener-
ate an IRQ. The IRQEn bits only influence the IRQ output and do not have any effect on the ISR contents or behavior.
Every one of the IRQEn bits operates on an ISR bit.
Bit 7: CTSIEn
The CTSIEn bit enables IRQ interrupt generation when the CTSInt interrupt bit is set in the ISR. Set CTSIEn bit low to
disable IRQ generation from CTSInt.
Bit 6: RxEmtyIEn
The RxEmtyIEn bit enables IRQ interrupt generation when the RxEmtyInt interrupt bit is set in the ISR. Set RxEmtyIEn
bit low to disable IRQ generation from RxEmtyInt.
Bit 5: TxEmtyIEn
The TxEmtyIEn bit enables IRQ interrupt generation when the TxEmptyInt interrupt bit is set in the ISR. Set TxEmtyIEn
bit low to disable IRQ generation from TxEmptyInt.
Bit 4: TxTrgIEn
The TxTrgIEn bit enables IRQ interrupt generation when the TFifoTrigInt interrupt bit is set in the ISR. Set TxTrgIEn bit
low to disable IRQ generation from TFifoTrigInt.
Bit 3: RxTrgIEn
The RxTrgIEn bit enables IRQ interrupt generation when the RFifoTrigInt interrupt bit is set in the ISR. Set RxTrgIEn bit
low to disable IRQ generation from RFifoTrigInt.
Bit 2: STSIEn
The STSIEn bit enables IRQ interrupt generation when the STSInt interrupt bit is set in the ISR. Set STSIEn bit low to
disable IRQ generation from STSInt.
Bit 1: SpclChrlEn
The SpclChrIEn bit enables IRQ interrupt generation when the SpCharInt interrupt bit is set in the ISR. Set SpclChrIEn
bit low to disable IRQ generation from SpCharInt.
THR—Transmit Hold Register
IRQEn—IRQ Enable Register
ADDRESS:
0x00
MODE:
W
BIT
7
6
5
4
3
2
1
0
NAME
TData7
TData6
TData5
TData4
TData3
TData2
TData1
TData0
ADDRESS:
0x01
MODE:
R/W
BIT
7
6
5
4
3
2
1
0
NAME
CTSIEn
RxEmtyIEn
TxEmtyIEn
TxTrgIEn
RxTrgIEn
STSIEn
SpclChrIEn
LSRErrIEn
RESET
0
24
Maxim Integrated
MAX3107
相关PDF资料
PDF描述
MAX3108EWA+T IC UART
MAX3109ETJ+ SEMICONDUCTOR OTHER
MAX310CPE IC VIDEO MULTIPLEXER 8X1 16DIP
MAX3110EENI+G36 IC UART SPI COMPAT 28-DIP
MAX3120CUA+ IC TXRX INFRARED IRDA 8-UMAX
相关代理商/技术参数
参数描述
MAX3107EAG+ 功能描述:UART 接口集成电路 SPI/I2C Compatible RoHS:否 制造商:Texas Instruments 通道数量:2 数据速率:3 Mbps 电源电压-最大:3.6 V 电源电压-最小:2.7 V 电源电流:20 mA 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:LQFP-48 封装:Reel
MAX3107EAG+T 功能描述:UART 接口集成电路 SPI/I2C Compatible RoHS:否 制造商:Texas Instruments 通道数量:2 数据速率:3 Mbps 电源电压-最大:3.6 V 电源电压-最小:2.7 V 电源电流:20 mA 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:LQFP-48 封装:Reel
MAX3107ETG/V+ 功能描述:UART 接口集成电路 UART RoHS:否 制造商:Texas Instruments 通道数量:2 数据速率:3 Mbps 电源电压-最大:3.6 V 电源电压-最小:2.7 V 电源电流:20 mA 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:LQFP-48 封装:Reel
MAX3107ETG/V+T 功能描述:UART 接口集成电路 SPI/IC UART with 128-Word FIFOs and Internal Oscillator RoHS:否 制造商:Texas Instruments 通道数量:2 数据速率:3 Mbps 电源电压-最大:3.6 V 电源电压-最小:2.7 V 电源电流:20 mA 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:LQFP-48 封装:Reel
MAX3107ETG+ 功能描述:UART 接口集成电路 SPI/I2C Compatible RoHS:否 制造商:Texas Instruments 通道数量:2 数据速率:3 Mbps 电源电压-最大:3.6 V 电源电压-最小:2.7 V 电源电流:20 mA 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:LQFP-48 封装:Reel