- 您现在的位置：买卖IC网 > PDF目录2011 > MAX5864ETM+T (Maxim Integrated Products)IC ANLG FRONT END 22MSPS 48-TQFN PDF资料下载
参数资料
| 型号： | MAX5864ETM+T |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 11/26页 |
| 文件大小： | 0K |
| 描述： | IC ANLG FRONT END 22MSPS 48-TQFN |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 2,500 |
| 位数： | 10 |
| 通道数： | 4 |
| 功率（瓦特）： | 2.10W |
| 电压 - 电源，模拟： | 2.7 V ~ 3.3 V |
| 电压 - 电源，数字： | 1.8 V ~ 3.3 V |
| 封装/外壳： | 48-WFQFN 裸露焊盘 |
| 供应商设备封装： | 48-TQFN-EP（7x7） |
| 包装： | 带卷 (TR) |
Clock jitter is especially critical for undersampling
applications. Consider the clock input as an analog
input and route away from any analog input or other
digital signal lines. The MAX5864 clock input operates
with an OVDD/2 voltage threshold and accepts a 50%
±15% duty cycle.
Reference Configurations
The MAX5864 features an internal precision 1.024V
bandgap reference is stable over the entire power sup-
ply and temperature range. The REFIN input provides
two modes of reference operation. The voltage at REFIN
(VREFIN) sets reference operation mode (Table 4).
In internal reference mode, connect REFIN to VDD.
VREF is an internally generated 0.512V. COM, REFP,
and REFN are low-impedance outputs with VCOM =
VDD/2, VREFP = VDD/2 + VREF/2, and VREFN = VDD/2 -
VREF/2. Bypass REFP, REFN, and COM each with a
0.33F capacitor. Bypass REFIN to GND with a 0.1F
capacitor.
In buffered external reference mode, apply 1.024V
±10% at REFIN. In this mode, COM, REFP, and REFN
are low-impedance outputs with VCOM = VDD/2, VREFP
= VDD/2 + VREFIN/4, and VREFN = VDD/2 - VREFIN/4.
Bypass REFP, REFN, and COM each with a 0.33F
capacitor. Bypass REFIN to GND with a 0.1F capaci-
tor. In this mode, the DAC’s full-scale output voltage
and common-mode voltage are proportional to the
external reference. For example, if the VREFIN is
increased by 10% (max), the DACs’ full-scale output
voltage is also increased by 10% or
±440mV, and the
common-mode voltage increases by 10%.
Applications Information
Using Balun Transformer AC-Coupling
An RF transformer (Figure 7) provides an excellent
solution to convert a single-ended signal source to a
fully differential signal for optimum ADC performance.
Connecting the center tap of the transformer to COM
provides a VDD/2 DC level shift to the input. A 1:1 trans-
former can be used, or a step-up transformer can be
selected to reduce the drive requirements. In general,
the MAX5864 provides better SFDR and THD with fully
differential input signals than single-ended signals,
especially for high-input frequencies. In differential
mode, even-order harmonics are lower as both inputs
(IA+, IA-, QA+, QA-) are balanced, and each of the
ADC inputs only requires half the signal swing com-
pared to single-ended mode. Figure 8 shows an RF
transformer converting the MAX5864 DACs’ differential
analog outputs to single ended.
MAX5864
Ultra-Low-Power, High Dynamic-
Performance, 22Msps Analog Front End
______________________________________________________________________________________
19
Table 4. Reference Modes
VREFIN
REFERENCE MODE
>0.8 x VDD
Internal reference mode. VREF is internally
generated to be 0.512V. Bypass REFP,
REFN, and COM each with a 0.33F
capacitor.
1.024V ±10%
Buffered external reference mode. An
external 1.024V ±10% reference voltage
is applied to REFIN. VREF is internally
generated to be VREFIN/2. Bypass REFP,
REFN, and COM each with a 0.33F
capacitor. Bypass REFIN to GND with a
0.1F capacitor.
Figure 7. Balun-Transformer Coupled Single-Ended to
Differential Input Drive for ADCs
COM
IA+
IA-
25
0.1
F
0.33
F
25
0.1
F
VIN
MAX5864
22pF
QA+
QA-
25
0.1
F
0.33
F
25
0.1
F
VIN
22pF
相关PDF资料 |
PDF描述 |
|---|---|
| MAX5865ETM+T | IC ANLG FRONT END 40MSPS 48-TQFN |
| MAX5866ETM+ | IC ANLG FRONT END 60MSPS 48-TQFN |
| MAX5873EGK+D | IC DAC 12BIT 200MSPS DUAL 68-QFN |
| MAX5874EGK+D | IC DAC 14BIT 200MSPS DUAL 68-QFN |
| MAX5875EGK+D | IC DAC 16BIT DUAL 200MSPS 68-QFN |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MAX5865ETM | 功能描述:ADC / DAC多通道 RoHS:否 制造商:Texas Instruments 转换速率: 分辨率:8 bit 接口类型:SPI 电压参考: 电源电压-最大:3.6 V 电源电压-最小:2 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-40 |
| MAX5865ETM+ | 功能描述:ADC / DAC多通道 10-Bit 2Ch 40Msps CODEC/AFE RoHS:否 制造商:Texas Instruments 转换速率: 分辨率:8 bit 接口类型:SPI 电压参考: 电源电压-最大:3.6 V 电源电压-最小:2 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-40 |
| MAX5865ETM+T | 功能描述:ADC / DAC多通道 10-Bit 2Ch 40Msps CODEC/AFE RoHS:否 制造商:Texas Instruments 转换速率: 分辨率:8 bit 接口类型:SPI 电压参考: 电源电压-最大:3.6 V 电源电压-最小:2 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-40 |
| MAX5865ETM-D | 制造商:Maxim Integrated Products 功能描述:DUAL 10BIT DAC & DUAL 8BIT ADC 40MSPS CODEC - Rail/Tube |
| MAX5865ETM-T | 功能描述:ADC / DAC多通道 RoHS:否 制造商:Texas Instruments 转换速率: 分辨率:8 bit 接口类型:SPI 电压参考: 电源电压-最大:3.6 V 电源电压-最小:2 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-40 |
发布紧急采购，3分钟左右您将得到回复。