- 您现在的位置：买卖IC网 > PDF目录1846 > MAX6898PALT+T (Maxim Integrated Products)IC SEQUENCE/SUPERVISOR 6UDFN PDF资料下载
参数资料
| 型号： | MAX6898PALT+T |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 11/15页 |
| 文件大小： | 0K |
| 描述： | IC SEQUENCE/SUPERVISOR 6UDFN |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 1 |
| 类型： | 序列发生器 |
| 监视电压数目： | 1 |
| 输出： | 开路漏极或开路集电极 |
| 复位： | 低有效 |
| 复位超时： | 可调节/可选择 |
| 电压 - 阀值： | 可调节/可选择 |
| 工作温度： | -40°C ~ 125°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 6-WFDFN |
| 供应商设备封装： | 6-uDFN（1.5x1.0） |
| 包装： | 标准包装 |
| 其它名称： | MAX6898PALT+TDKR |
MAX6895–MAX6899
Ultra-Small, Adjustable
Sequencing/Supervisory Circuits
Pullup Resistor Values
(MAX6897/MAX6898)
The exact value of the pullup resistors for the open-
drain outputs is not critical, but some consideration
should be made to ensure the proper logic levels when
the device is sinking current. For example, if V CC =
2.25V and the pullup voltage is 28V, you would try to
keep the sink current less than 0.5mA as shown in the
Electrical Characteristics table. As a result, the pullup
resistor should be greater than 56k Ω . For a 12V pullup,
the resistor should be larger than 24k Ω . It should be
noted that the ability to sink current is dependent on the
V CC supply voltage.
Typical Application Circuits
Figures 8, 9, 10 show typical applications for the
MAX6895 –MAX6899. Figure 8 shows the MAX6895
3.3V ALWAYS ON
used with a p-channel MOSFET in an overvoltage pro-
tection circuit. Figure 9 shows the MAX6895 in a low-
voltage sequencing application using an n-channel
MOSFET. Figure 10 shows the MAX6895 used in a mul-
tiple-output sequencing application.
Using an n-Channel Device for Sequencing
In higher power applications, using an n-channel device
reduces the loss across the MOSFETs as it offers a
lower drain-to-source on-resistance. However, an n-
channel MOSFET requires a sufficient V GS voltage to
fully enhance it for a low R DS_ON . The application in
Figure 9 shows the MAX6895 in a switch sequencing
application using an n-channel MOSFET.
Similarly, if a higher voltage is present in the system, the
open-drain version can be used in the same manner.
5V BUS 1.2V INPUT
0 TO 28V
P
MONITORED
N
1.2V OUTPUT
3.3V
ENABLE
V CC
R PULLUP
ENABLE
V CC
R1
R2
IN
OUT
MAX6897
CDELAY
R1
R2
IN
OUT
MAX6895
CDELAY
GND
GND
C CDELAY
Figure 8. Overvoltage Protection
Maxim Integrated
Figure 9. Low-Voltage Sequencing Using an n-Channel MOSFET
11
相关PDF资料 |
PDF描述 |
|---|---|
| MAX690AESA | IC MPU SUPERVISORY CIRCUIT 8SOIC |
| MAX691ACWE | IC MPU SUPERVISOR CIRCUIT 16SOIC |
| MAX691EWE | IC MPU SUPERVISOR CIRCUIT 16SOIC |
| MAX6920ATP+ | IC DRVR VFD TUBE SRL 20-TQFN |
| MAX6921AWI+ | IC DRVR VFD TUBE SRL 28-SOIC |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MAX6898PAZT+T | 功能描述:监控电路 Ultra-small adjustable sequencing/supervisioin circuits RoHS:否 制造商:STMicroelectronics 监测电压数: 监测电压: 欠电压阈值: 过电压阈值: 输出类型:Active Low, Open Drain 人工复位:Resettable 监视器:No Watchdog 电池备用开关:No Backup 上电复位延迟（典型值）:10 s 电源电压-最大:5.5 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:UDFN-6 封装:Reel |
| MAX6899AALT+ | 制造商:Maxim Integrated Products 功能描述:MAXIM MAX6899AALT+ PROCESSOR SUPERVISORS - Tape and Reel 制造商:Maxim Integrated Products 功能描述:Maxim MAX6899AALT+ Processor Supervisors |
| MAX6899AALT+T | 功能描述:监控电路 Adjustable Sequencer/Supervisor RoHS:否 制造商:STMicroelectronics 监测电压数: 监测电压: 欠电压阈值: 过电压阈值: 输出类型:Active Low, Open Drain 人工复位:Resettable 监视器:No Watchdog 电池备用开关:No Backup 上电复位延迟（典型值）:10 s 电源电压-最大:5.5 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:UDFN-6 封装:Reel |
| MAX6899AAZT+ | 制造商:Maxim Integrated Products 功能描述:MAXIM MAX6899AAZT+, SUPERVISORS - Tape and Reel 制造商:Maxim Integrated Products 功能描述:Maxim MAX6899AAZT+, Supervisory Circuit Voltage-Monitoring 1.5V-5.5V 6-pin TSOT23 |
| MAX6899AAZT+T | 功能描述:监控电路 Adjustable Sequencer/Supervisor RoHS:否 制造商:STMicroelectronics 监测电压数: 监测电压: 欠电压阈值: 过电压阈值: 输出类型:Active Low, Open Drain 人工复位:Resettable 监视器:No Watchdog 电池备用开关:No Backup 上电复位延迟（典型值）:10 s 电源电压-最大:5.5 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:UDFN-6 封装:Reel |
发布紧急采购，3分钟左右您将得到回复。