- 您现在的位置：买卖IC网 > PDF目录15533 > MAX8731AETI+T (Maxim Integrated Products)IC SMBUS LVL2 BATT CHRGR 28TQFN PDF资料下载
参数资料
| 型号： | MAX8731AETI+T |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 17/32页 |
| 文件大小： | 0K |
| 描述： | IC SMBUS LVL2 BATT CHRGR 28TQFN |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 2,500 |
| 功能： | 充电管理 |
| 电池化学： | 多化学 |
| 电源电压： | 8 V ~ 26 V |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 28-WFQFN 裸露焊盘 |
| 供应商设备封装： | 28-TQFN-EP（5x5） |
| 包装： | 带卷 (TR) |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页当前第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页
SMBus Level 2 Battery Charger
with Remote Sense
Setting Charge Current
To set the charge current, use the SMBus to write a 16-
bit ChargeCurrent() command using the data format
listed in Table 2 . The ChargeCurrent() command uses
the Write-Word protocol (see Figure 3). The command
code for ChargeCurrent() is 0x14 (0b00010100). When
RS2 =10m Ω , the MAX8731A provides a charge current
range of 128mA to 8.064A, with 128mA resolution. Set
ChargeCurrent() to 0 to terminate charging. Upon reset,
the ChargeVoltage() and ChargeCurrent() values are
cleared and the charger remains off until both the
ChargeVoltage() and the ChargeCurrent() commands
are sent. Both DHI and DLO remain low until the charger
is restarted.
The MAX8731A includes a foldback current limit when
the battery voltage is low. If the battery voltage is less
than 2.5V, the charge current is temporarily set to
128mA. The ChargeCurrent() register is preserved and
becomes active again when the battery voltage is high-
er than 2.5V. This function effectively provides a fold-
back current limit, which protects the charger during
Setting Input-Current Limit
System current normally fluctuates as portions of the
system are powered up or put to sleep. By using the
input-current-limit circuit, the output-current require-
ment of the AC wall adapter can be lowered, reducing
system cost.
The total input current, from a wall cube or other DC
source, is the sum of the system supply current and the
current required by the charger. When the input current
exceeds the set input current limit, the MAX8731A
decreases the charge current to provide priority to sys-
tem load current. As the system supply rises, the avail-
able charge current drops linearly to zero. Thereafter,
the total input current can increase without limit.
The internal amplifier compares the differential voltage
between CSSP and CSSN to a scaled voltage set by
the InputCurrent() command (see Table 3). The total
input current is the sum of the device supply current,
the charger input current, and the system load current.
The total input current can be estimated as follows:
short circuit and overload.
Table 2 . ChargeCurrent() (0x14) (10m Ω Sense Resistor, RS2)
BIT
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
BIT NAME
—
—
—
—
—
—
—
Charge Current, DACI 0
Charge Current, DACI 1
Charge Current, DACI 2
Charge Current, DACI 3
Charge Current, DACI 4
Charge Current, DACI 5
—
—
—
DESCRIPTION
Not used. Normally a 1mA weight.
Not used. Normally a 2mA weight.
Not used. Normally a 4mA weight.
Not used. Normally an 8mA weight.
Not used. Normally a 16mA weight.
Not used. Normally a 32mA weight.
Not used. Normally a 64mA weight.
0 = Adds 0mA of charger current compliance.
1 = Adds 128mA of charger current compliance.
0 = Adds 0mA of charger current compliance.
1 = Adds 256mA of charger current compliance.
0 = Adds 0mA of charger current compliance.
1 = Adds 512mA of charger current compliance.
0 = Adds 0mA of charger current compliance.
1 = Adds 1024mA of charger current compliance.
0 = Adds 0mA of charger current compliance.
1 = Adds 2048mA of charger current compliance.
0 = Adds 0mA of charger current compliance.
1 = Adds 4096mA of charger current compliance, 8064mA max.
Not used. Normally a 8192mA weight.
Not used. Normally a 16,386mA weight.
Not used. Normally a 32,772mA weight.
______________________________________________________________________________________
17
相关PDF资料 |
PDF描述 |
|---|---|
| V48C48C75BL2 | CONVERTER MOD DC/DC 48V 75W |
| V48C48C75B3 | CONVERTER MOD DC/DC 48V 75W |
| V48C48C75B2 | CONVERTER MOD DC/DC 48V 75W |
| V48C28C75BG2 | CONVERTER MOD DC/DC 28V 75W |
| AIUR-10-271K | INDUCTOR POWER 270UH 10% T/H |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MAX8731AEVKIT+ | 功能描述:电源管理IC开发工具 MAX8731A Eval Kit RoHS:否 制造商:Maxim Integrated 产品:Evaluation Kits 类型:Battery Management 工具用于评估:MAX17710GB 输入电压: 输出电压:1.8 V |
| MAX8731AEVSYS | 功能描述:电池管理 Evaluation System for the MAX8731A (includes an EVKit and the Maxim SMBUSMON2 board) RoHS:否 制造商:Texas Instruments 电池类型:Li-Ion 输出电压:5 V 输出电流:4.5 A 工作电源电压:3.9 V to 17 V 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:VQFN-24 封装:Reel |
| MAX8731ETI+ | 制造商:Maxim Integrated Products 功能描述:CHGR MULTI-CHEM 8A 0V TO 19.2V 28TQFN - Rail/Tube |
| MAX8731ETI+T | 制造商:Maxim Integrated Products 功能描述:CHGR MULTI-CHEM 8A 0V TO 19.2V 28TQFN - Tape and Reel |
| MAX8731EVKIT | 功能描述:电池管理 SMBus Level 2 Battery Charger with Remote Sense RoHS:否 制造商:Texas Instruments 电池类型:Li-Ion 输出电压:5 V 输出电流:4.5 A 工作电源电压:3.9 V to 17 V 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:VQFN-24 封装:Reel |
发布紧急采购，3分钟左右您将得到回复。