- 您现在的位置：买卖IC网 > Datasheet目录341 > MAX8831EWE+T (Maxim Integrated)IC LED DRIVR WHITE BCKLGT 16-WLP Datasheet资料下载
参数资料
| 型号： | MAX8831EWE+T |
| 厂商： | Maxim Integrated |
| 文件页数： | 18/28页 |
| 文件大小： | 0K |
| 描述： | IC LED DRIVR WHITE BCKLGT 16-WLP |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 1 |
| 拓扑： | 线性（LDO），PWM，升压（升压） |
| 输出数： | 5 |
| 内部驱动器： | 是 |
| 类型 - 主要： | 背光 |
| 类型 - 次要： | 白色 LED |
| 频率： | 1.8MHz ~ 2.2MHz |
| 电源电压： | 1.6 V ~ 5.5 V |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 16-UFBGA，WLCSP |
| 供应商设备封装： | 16-WLP（2x2） |
| 包装： | 标准包装 |
| 工作温度： | -40°C ~ 85°C |
| 其它名称： | MAX8831EWE+TDKR |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页当前第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页
High-Efficiency, White LED Step-Up Converter
with I 2 C Interface in 2mm x 2mm WLP
0 . 9 × V IN ( MIN )
I PEAK = +
LED_ current regulator. Write a 0 to the LED#_EN bit to
disable that LED_ current regulator. Overvoltage, open
Schottky diode, and thermal-shutdown faults automati-
cally clear all LED#_EN bits to turn off all LED current
regulators.
LED_ Ramp Control Registers
The LED_ ramp control registers (LED1_RAMP_CNTL
to LED5_RAMP_CNTL) contains the timing information
for each LED current regulator’s ramp-up and ramp-
down rate. The registers at locations 0x03 to 0x07 pro-
gram the ramp rates of the LED1 to LED5 current
regulators, respectively. The ramp-up and ramp-down
rates are programmable with eight different timing
selections. See Table 5.
LED_ Current Control Registers
The LED_ current control registers (ILED1_CNTL to
ILED5_CNTL) program the individual LED1 to LED5
current regulators (see Tables 1 and 2 for programma-
ble values). Registers located at 0x0B and 0x0C pro-
gram the current of the LED1 and LED2 current
regulators (Table 6). Registers located at 0x0D, 0x0E,
and 0x0F program the current of the LED3, LED4, and
LED5 current regulators, respectively (Table 7).
LED3, LED4, and LED5 Blink Control Registers
The blink control registers (LED3_BLINK_CNTL to
LED5_BLINK_CNTL) contain the blink control timing
data for the LED3, LED4, and LED5 current regulators.
The registers allow enabling of the blink function and
control the on- and off-time of the blink sequence. The
registers located at 0x17, 0x18, and 0x19 control the
blink timing of the LED3, LED4, and LED5 current regu-
lators, respectively. See Table 8. The LED1 and LED2
current regulators do not have blink functionality.
Boost Control Register
The boost control register (BOOST_CNTL) determines if
the LED3, LED4, or LED5 current regulators are includ-
ed in the step-up converter regulation loop. If pro-
grammed to be powered from the step-up converter,
LED_ is included in the feedback loop. Otherwise, if
LED_ is programmed to be powered from an alternate
source, LED_ is not included in the feedback loop.
LED3, LED4, and LED5 are high impedance in shut-
down. If the BOOST_CNTL bits are programmed to
power LED3, LED4, or LED5 from an alternate source,
open LED detection is enabled only for that current reg-
ulator. See Table 9. The LED1 and LED2 inputs are
always in the feedback loop and are not programmable
with the boost control register.
LED_ Status Registers
The LED_ status registers (STAT1, STAT2) indicate the
fault conditions of the MAX8831 IC and LEDs and are
read-only registers. The STAT1 register indicates a fault
condition for each LED_ string, whether a shorted or
open LED_ fault is causing the fault condition. The sec-
ond status register, STAT2, reports the following global
system faults: output overvoltage-condition detection
(OVP), thermal-shutdown condition detection (TSD),
and open Schottky diode detection (OSDD). See
Tables 10 and 11. See the Open/Shorted LED
Detection, Output Overvoltage Protection, Open
Schottky Diode Detection, Thermal-Shutdown
Protection, and System States and Fault Handling sec-
tions for more details.
Chip ID
The CHIP ID registers (CHIP_ID1 and CHIP_ID2) con-
tains MAX8831 die type and mask revision data. These
registers are read-only registers. See Tables 12 and 13.
Applications Information
Inductor Selection
The MAX8831 is optimized for a 10μH inductor,
although larger or smaller inductors can be used.
Using a smaller inductor results in discontinuous cur-
rent-mode operation over a larger range of output
power, whereas use of a larger inductor results in con-
tinuous conduction for most of the operating range.
To prevent core saturation, ensure that the inductor’s sat-
uration current rating exceeds the peak inductor current
for the application. For larger inductor values and contin-
uous conduction operation, calculate the worst-case
peak inductor current with the following formula:
V OUT × I OUT ( MAX ) V IN ( MIN ) × 0 . 5 μ s
2 × L
Otherwise, for small values of L in discontinuous con-
duction operation, I PEAK is 860mA (typ). Table 14 pro-
vides a list of recommended inductors.
Capacitor Selection
Ceramic X5R or X7R dielectric capacitors are recom-
mended for best operation. When selecting ceramic
capacitors in the smallest available case size for a
given value, ensure that the capacitance does not
degrade significantly with DC bias. Generally, ceramic
capacitors with high values and very small case size
have poor DC bias characteristics.
18
______________________________________________________________________________________
相关PDF资料 |
PDF描述 |
|---|---|
| MAX8834ZEWP+T | IC LED DRIVR BCKLGT FLASH 20-WLP |
| MAX8855EVKIT+ | KIT EVAL FOR MAX8855 |
| MAX8879ETG+T | IC LED DRVR WT/RGB BCKLGT 24TQFN |
| MAX8901BETA+TCH8 | IC LED DRIVER WHITE BCKLGT 8TDFN |
| MAX8930EWJ+T | IC LED DRVR WT/RGB BCKLGT 49WLP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MAX8833ETJ+ | 功能描述:直流/直流开关调节器 Dual 3A 2MHz Step-Down Regulator RoHS:否 制造商:International Rectifier 最大输入电压:21 V 开关频率:1.5 MHz 输出电压:0.5 V to 0.86 V 输出电流:4 A 输出端数量: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:PQFN 4 x 5 |
| MAX8833ETJ+T | 功能描述:直流/直流开关调节器 Dual 3A 2MHz Step-Down Regulator RoHS:否 制造商:International Rectifier 最大输入电压:21 V 开关频率:1.5 MHz 输出电压:0.5 V to 0.86 V 输出电流:4 A 输出端数量: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:PQFN 4 x 5 |
| MAX8834YEVKIT+ | 功能描述:LED 照明开发工具 Adaptive Step-Up Converters with 1.5A Flash Driver RoHS:否 制造商:Fairchild Semiconductor 产品:Evaluation Kits 用于:FL7732 核心: 电源电压:120V 系列: 封装: |
| MAX8834YEWP+T | 功能描述:LED照明驱动器 Adaptive Step-Up Converter RoHS:否 制造商:STMicroelectronics 输入电压:11.5 V to 23 V 工作频率: 最大电源电流:1.7 mA 输出电流: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:SO-16N |
| MAX8834ZEWP+T | 功能描述:LED照明驱动器 Adaptive Step-Up Converter RoHS:否 制造商:STMicroelectronics 输入电压:11.5 V to 23 V 工作频率: 最大电源电流:1.7 mA 输出电流: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:SO-16N |
发布紧急采购，3分钟左右您将得到回复。