- 您现在的位置：买卖IC网 > Datasheet目录342 > MB85RC64PNF-G-JNE1 (Fujitsu Semiconductor America Inc)IC FRAM 64KBIT 400KHZ 8SOP Datasheet资料下载
参数资料
| 型号： | MB85RC64PNF-G-JNE1 |
| 厂商： | Fujitsu Semiconductor America Inc |
| 文件页数： | 4/20页 |
| 文件大小： | 0K |
| 描述： | IC FRAM 64KBIT 400KHZ 8SOP |
| 特色产品： | FRAM (Ferroelectric RAM) |
| 标准包装： | 1,500 |
| 格式 - 存储器： | RAM |
| 存储器类型： | FRAM（Ferroelectric RAM） |
| 存储容量： | 64K (8K x 8) |
| 速度： | 400kHz |
| 接口： | I²C，2 线串口 |
| 电源电压： | 2.7 V ~ 3.6 V |
| 工作温度： | -40°C ~ 85°C |
| 封装/外壳： | 8-SOIC（0.154"，3.90mm 宽） |
| 供应商设备封装： | 8-SOP |
| 包装： | 托盘 |
| 其它名称： | 865-1175 |
MB85RC64
■ I 2 C COMMUNICATION PROTOCOL
The I 2 C bus is a two wire serial interface that uses a bidirectional data bus (SDA) and serial clock (SCL). A
data transfer can only be initiated by the bus master, which will also provide the serial clock for synchroni-
zation. The SDA signal should change while SCL is Low. However, as an exception, when starting and
stopping communication sequence, SDA is allowed to change while SCL is High.
? Start Condition
To start read or write operations by the I 2 C bus, set the SDA input from High to Low while the SCL input is
in High in order to start reading and writing.
? Stop Condition
Set the SDA input from Low to High while the SCL input is in High in order to terminate the I 2 C bus commu-
nication. Because the MB85RC64 does not need the writing wait time unlike E 2 PROM, it goes to the standby
state immediately after the stop condition input.
? Start Condition, Stop Condition
SCL
SDA
Start
Stop
Note : The FRAM device does not need the programming wait time like t WC after issuing the Stop Condition
such as.
4
DS05–13109–3E
相关PDF资料 |
PDF描述 |
|---|---|
| MB85RS128APNF-G-JNE1 | IC FRAM 128KBIT 25MHZ 8SOP |
| MB85RS64PNF-G-JNE1 | IC FRAM 64KBIT 20MHZ 8SOP |
| MC10SX1130DR2 | IC LED DRIVER LINEAR 16-SOIC |
| MC33152DG | IC DRIVER MOSFET DUAL HS 8SOIC |
| MC33153PG | IC DRIVER GATE SINGLE IGBT 8DIP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MB85RC64PNF-G-JNERE1 | 制造商:FUJITSU 功能描述:64K(8K8) bit,I2C,Memory FRAM |
| MB85RC64TAPNF-G-BDERE1 | 功能描述:IC FRAM 64KBIT 3.4MHZ 8SOP 制造商:fujitsu electronics america, inc. 系列:- 包装:剪切带（CT） 零件状态:在售 存储器类型:非易失 存储器格式:FRAM 技术:FRAM（铁电体 RAM） 存储容量:64Kb （8K x 8） 时钟频率:3.4MHz 写周期时间 - 字，页:- 存储器接口:I2C 电压 - 电源:1.8 V ~ 3.6 V 工作温度:-40°C ~ 85°C（TA） 安装类型:表面贴装 封装/外壳:8-SOIC（0.154"，3.90mm 宽） 供应商器件封装:8-SOP 标准包装:1 |
| MB85RC64TAPN-G-AWERE1 | 功能描述:IC FRAM 64KBIT 3.4MHZ 8SON 制造商:fujitsu electronics america, inc. 系列:- 包装:剪切带（CT） 零件状态:在售 存储器类型:非易失 存储器格式:FRAM 技术:FRAM（铁电体 RAM） 存储容量:64Kb （8K x 8） 时钟频率:3.4MHz 写周期时间 - 字，页:- 存储器接口:I2C 电压 - 电源:1.8 V ~ 3.6 V 工作温度:-40°C ~ 85°C（TA） 安装类型:表面贴装 封装/外壳:8-WFDFN 裸露焊盘 供应商器件封装:8-SON 标准包装:1 |
| MB85RC64V | 制造商:FUJITSU 制造商全称:Fujitsu Component Limited. 功能描述:64 K (8 K??8) ?????????I2C |
| MB85RC64VPNF-ES-JNE1 | 制造商:FUJITSU 功能描述: |
发布紧急采购，3分钟左右您将得到回复。