MB90520 Series
9
Pin no.
Pin name
Circuit
type
Function
LQFP-120*1
QFP-120*2
117
P26
E
This is a general-purpose I/O port.
ZIN0
This port can be used as count clock Z input for 8/16-bit up/down
counter/timer 0.
INT7
This is a request input pin of the DTP/external interrupt circuit
ch.7.
118
P27
E
This is a general-purpose I/O port.
ADTG
This is an external trigger input pin of the 8/10-bit A/D converter.
Since this input is used as required for 8/10-bit A/D converter input
operation, output by other functions must be suspended except for
intentional operation.
120
P30
E
This is a general-purpose I/O port.
1
P31
E
This is a general-purpose I/O port.
CKOT
This is a clock monitor function output pin.
This function is valid when clock monitor output is enabled.
2
P32
E
This is a general-purpose I/O port.
This function becomes valid when waveform output from the
OUT0 is disabled.
OUT0
This is an event output pin for output compare 0 (OCU) ch.0.
This function is valid when output for each channel is enabled.
3
P33
E
This is a general-purpose I/O port.
This function becomes valid when waveform output from the
OUT1 is disabled.
OUT1
This is an event output pin for output compare 0 (OCU) ch.1.
This function is valid when output for each channel is enabled.
4
P34
E
This is a general-purpose I/O port.
This function becomes valid when waveform output from the
OUT2 is disabled.
OUT2
This is an event output pin for output compare 0 (OCU) ch.2.
This function is valid when output for each channel is enabled.
5
P35
E
This is a general-purpose I/O port.
This function becomes valid when waveform output from the
OUT3 is disabled.
OUT3
This is an event output pin for output compare 0 (OCU) ch.3.
This function is valid when output for each channel is enabled.
6
P36
E
This is a general-purpose I/O port.
This function becomes valid when waveform output from the PG00
is disabled.
PG00
This is an output pin of 8/16-bit PPG timer 0.
This function becomes valid when waveform output from PG00 is
enabled.
(Continued)
*1: FPT-120P-M05
*2: FPT-120P-M13