参数资料
型号: MC33911G5AC
厂商: Freescale Semiconductor
文件页数: 36/92页
文件大小: 0K
描述: IC SYSTEM BASIS CHIP 32LQFP
标准包装: 250
应用: 系统基础芯片
电流 - 电源: 4.5mA
电源电压: 5.5 V ~ 27 V
工作温度: -40°C ~ 125°C
安装类型: 表面贴装
封装/外壳: 32-LQFP
供应商设备封装: 32-LQFP(7x7)
包装: 托盘
MC33911G5AC/MC3433911G5AC
FUNCTIONAL DEVICE OPERATIONS
OPERATIONAL MODES
WAKE-UP
MODULE
LIN
Wake-up
MOD1:2
LSR0:1
VS1
J2602
RXONLY
RXSHORT
LIN DRIVER
Slope and Slew Rate Control
Over-temperature Shutdown (interrupt maskable)
TXDOM
LINOT
30 K
LIN
TXD
SLOPE
WAKE-UP
CONTROL
LGND
FILTER
RXD
RECEIVER
Figure 19. LIN Interface
Slew Rate Selection
The slew rate can be selected for optimized operation at 10.4
and 20 kBit/s as well as a fast baud rate for test and
programming. The slew rate can be adapted with the bits
LSR1:0 in the LIN Control Register (LINCR). The initial slew
rate is optimized for 20 kBit/s.
J2602 Conformance
To be compliant with the SAE J2602-2 specification, the
J2602 feature has to be enabled in the LINCR Register (bit
DIS_J2602 sets to 0). The LIN transmitter is disabled in case
of a V SUP under-voltage condition occurs and TXD is in
Recessive State: the LIN bus goes in Recessive State and
RXD goes high. The LIN transmitter is not disabled if TXD is
in Dominant State. A deglitcher on Vsup (t J2602_DEG ) is
implemented to avoid false switching.
If the (DIS_J2602) bit is set to 1, the J2602 feature is disabled
and the communication TXD-LIN-RXD works for V SUP down
to 4.6 V (typical value) and then the communication is
interrupted.
The (DIS_J2602) bit is set per default to 0.
Over-temperature Shutdown (LIN Interrupt)
The output low side FET is protected against over-
temperature conditions. In case of an over-temperature
condition, the transmitter will be shut down and the LINOT bit
in the LIN Status Register (LINSR) is set.
If the LINM bit is set in the Interrupt Mask Register (IMR), an
Interrupt IRQ will be generated.
The transmitter is automatically re-enabled once the
condition is gone and TXD is high.
RXD Short-circuit Detection (LIN Interrupt)
The LIN transceiver has a short-circuit detection for the RXD
output pin. If the device transmits and in case of a short-
circuit condition, either 5.0 V or Ground, the RXSHORT bit in
the LIN Status Register (LINSR) is set and the transmitter is
shut down.
If the LINM bit is set in the Interrupt Mask Register (IMR), an
Interrupt IRQ will be generated.
The transmitter is automatically re-enabled once the
condition is gone (transition on RXD) and TXD is high.
A read of the LIN Status Register (LINSR) without the RXD
pin short-circuit condition will clear the bit RXSHORT.
33911
Analog Integrated Circuit Device Data ?
36
Freescale Semiconductor
相关PDF资料
PDF描述
M1AXK-1040K IDC CABLE - MSC10K/MC10F/X
100R05-457B CABLE FLAT FLEX 5POS 1MM 18"
VE-B50-EW CONVERTER MOD DC/DC 5V 100W
ECM24DCAD-S189 CONN EDGECARD 48POS R/A .156 SLD
GEC31DRTF-S13 CONN EDGECARD 62POS .100 EXTEND
相关代理商/技术参数
参数描述
MC33911G5ACR2 功能描述:LIN 收发器 SBC LIN 2.5G Medium end RoHS:否 制造商:NXP Semiconductors 工作电源电压: 电源电流: 最大工作温度: 封装 / 箱体:SO-8
MC33912BAC 功能描述:LIN 收发器 SBC LIN2G - HI END RoHS:否 制造商:NXP Semiconductors 工作电源电压: 电源电流: 最大工作温度: 封装 / 箱体:SO-8
MC33912BACR2 功能描述:LIN 收发器 SBC LIN2G - HI END RoHS:否 制造商:NXP Semiconductors 工作电源电压: 电源电流: 最大工作温度: 封装 / 箱体:SO-8
MC33912G5AC 功能描述:LIN 收发器 SBC LIN 2.5G RoHS:否 制造商:NXP Semiconductors 工作电源电压: 电源电流: 最大工作温度: 封装 / 箱体:SO-8
MC33912G5ACR2 功能描述:LIN 收发器 SBC LIN 2.5G RoHS:否 制造商:NXP Semiconductors 工作电源电压: 电源电流: 最大工作温度: 封装 / 箱体:SO-8