参数资料
| 型号： | MC3PHACVPE |
| 厂商： | Freescale Semiconductor |
| 文件页数： | 32/36页 |
| 文件大小： | 0K |
| 描述： | IC MOTOR CONTROLLER 28-DIP |
| 标准包装： | 13 |
| 应用： | AC 电机控制器，3 相 |
| 输出数： | 1 |
| 电源电压： | 4.5 V ~ 5.5 V |
| 工作温度： | -40°C ~ 105°C |
| 安装类型： | 通孔 |
| 封装/外壳： | 28-DIP（0.600"，15.24mm） |
| 供应商设备封装： | 28-PDIP |
| 包装： | 管件 |
| 产品目录页面： | 808 (CN2011-ZH PDF) |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页当前第32页第33页第34页第35页第36页
Optoisolated RS232 Interface Application Example
shifting from the PC to the MC3PHAC’s serial port. An RS-232 line receiver, such as an MC1489, serves
the same purpose without the optoisolation function.
To send data from the MC3PHAC to the PC’s serial port input, it is necessary to satisfy the PC’s receive
data (RxD) input requirements. In an idle condition, the RxD input to the PC must be at Mark
(–3 to –25 volts). The data terminal ready output (DTR) on the PC outputs a Mark when the port is
initialized. The request to send (RTS) output is set to a Space (+3 to +25 volts) when the PC’s serial port
is initialized. Because the interface is half-duplex, the PC’s TxD output is also at a Mark, as it is idle. The
idle state of the MC3PHAC’s serial port output is a logic 1. The logic 1 out of the MC3PHAC’s serial port
output port forces the diode in U2 to be turned off. With the diode in U2 turned off, the transistor in U2 is
also turned off. The junction of D2 and D3 are at a Mark (–3 to –25 volts). With the transistor in U2 turned
off, the input is pulled to a Mark through current limiting resistor R3, satisfying the PC’s serial input in an
idle condition. When a start bit is sent from the MC3PHAC’s serial port, it transitions to a logic 0. That logic
0 turns on the diode in U2, thus turning on the transistor in U2. The conducting transistor in U2 passes
the voltage output from the PC’s RTS output, that is now at a Space (+3 to +25 volts), to the PC’s receive
data (RxD) input. Capacitor C1 is a bypass capacitor used to stiffen the Mark signal. The output half of
the circuit provides output isolation, signal inversion, and level shifting from the MC3PHAC’s serial output
port to the PC’s serial port. An RS-232 line driver, such as a MC1488, serves the same purpose without
the optoisolation function.
MC3PHAC Monolithic Intelligent Motor Controller, Rev. 2
32
Freescale Semiconductor
相关PDF资料 |
PDF描述 |
|---|---|
| MC44604PG | IC REG CTRLR FLYBACK PWM 16-DIP |
| MC44605PG | IC REG CTRLR FLYBK ISO PWM 16DIP |
| MC44608P75G | IC REG CTRLR FLYBK ISO PWM 8-DIP |
| MC7810ECDTX | IC REG LDO 10V 1A DPAK |
| MC7818CD2TR4G | IC REG LDO 18V 1A D2PAK |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MC3S12C128 | 制造商:MOTOROLA 制造商全称:Motorola, Inc 功能描述:16-Bit Microcontroller |
| MC3S12C32 | 制造商:MOTOROLA 制造商全称:Motorola, Inc 功能描述:16-Bit Microcontroller |
| MC3S12C64 | 制造商:MOTOROLA 制造商全称:Motorola, Inc 功能描述:16-Bit Microcontroller |
| MC3S12C96 | 制造商:MOTOROLA 制造商全称:Motorola, Inc 功能描述:16-Bit Microcontroller |
| MC3S12GC32 | 制造商:MOTOROLA 制造商全称:Motorola, Inc 功能描述:16-Bit Microcontroller |
发布紧急采购，3分钟左右您将得到回复。