参数资料
| 型号： | MC44604PG |
| 厂商： | ON Semiconductor |
| 文件页数： | 10/22页 |
| 文件大小： | 0K |
| 描述： | IC REG CTRLR FLYBACK PWM 16-DIP |
| 产品变化通告： | Product Obsolescence 19/Dec/2008 |
| 标准包装： | 500 |
| 系列： | GreenLine™ |
| PWM 型： | 电流模式 |
| 输出数： | 1 |
| 频率 - 最大： | 250kHz |
| 占空比： | 82% |
| 电源电压： | 10 V ~ 15 V |
| 降压： | 无 |
| 升压： | 无 |
| 回扫： | 是 |
| 反相： | 无 |
| 倍增器： | 无 |
| 除法器： | 无 |
| Cuk： | 无 |
| 隔离： | 无 |
| 工作温度： | -25°C ~ 85°C |
| 封装/外壳： | 16-DIP（0.300"，7.62mm） |
| 包装： | 管件 |
| 其它名称： | MC44604PGOS |
MC44604
Pin
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Name
V CC
V C
Output
GND
Foldback Input
Overvoltage Protection
Current Sense Input
Demagnetization Detection
Standby Current Set
C T
Soft ? Start/D max /Voltage ? Mode
Clamp Error Amplifier Input
E/A Out
Voltage Feedback
Standby Management
R REF
Pin Description
This pin is the positive supply of the IC.
The output high state, V OH , is set by the voltage applied to this pin. With a separate
connection to the power source, it gives the possibility to set by means of an external
resistor the output source current at a different value than the sink current.
The output current capability is suited for driving a power MOSFET. A Bipolar
transistor can also be driven for low power applications. The maximum on ? time of the
duty cycle can last up to 80% of the switching period.
The ground pin is a single return typically connected back to the power source, it is
used as control and power ground.
The foldback function ensures an overload protection. Feeding the foldback input with
a portion of the V CC voltage (1.0 V max) establishes on the system control loop a
foldback characteristic allowing a smoother startup and a sharper overload protection.
The foldback action performs an active current sense clamping reduction. Above
1.0 V the foldback input is no more active.
When the overvoltage protection pin receives a voltage greater than 17 V the device
gets disabled and requires a complete restart sequence. The overvoltage level is
programmable.
A voltage proportional to the current flowing into the power switch is connected to this
input. The PWM latch uses this information to terminate the conduction of the output
buffer when operating in current mode. A maximum level of 1.0 V allows to limit the
inductor current either in current or voltage mode of operation.
A voltage delivered by an auxiliary transformer winding provides to the
demagnetization pin an indication of the magnetization state of the flyback energy
reservoir. A zero voltage detection corresponds to a complete core demagnetization.
The demagnetization detection ensures a discontinuous mode of operation. This
function can be inhibited by connecting Pin 8 to GND.
Using an external resistor connected to this pin, the standby burst mode peak current
can be adjusted.
The normal mode oscillator frequency is programmed by the capacitor C T choice
together with the R ref resistance value. C T , connected between pin 10 and GND,
generates the oscillator sawtooth.
A capacitor or a resistor or a voltage source connected to this pin can temporary or
permanently control the effective switching duty ? cycle. This pin can be used as a
voltage mode control input. By connecting pin 11 to Ground, the MC44604 can be
shut down.
In normal mode, the current drawn from this pin, is used by the Error Amplifier to
perform the regulation. A 4.7 V zener diode clamps the voltage of this pin.
The error amplifier output is made available for loop compensation.
This is the inverting input of the Error Amplifier. It uses a voltage that is built up using
the current drawn from the pin 12.
This block is designed to detect the standby mode. It particularly determines if the
circuit must work in standby or in normal mode at each startup. For that, it uses an
information given by an external arrangement consisting of an opto ? coupler. In
standby mode, this block makes the circuit work in the standby configuration, and the
current injected in the pin 15 is used to perform the regulation. In normal mode, this
pin is internally connected to the pin 12.
The R REF values fixes the internal reference current which is used to perform the
precise oscillator waveform. The current range goes from 100 m A up to 500 m A.
http://onsemi.com
10
相关PDF资料 |
PDF描述 |
|---|---|
| MC44605PG | IC REG CTRLR FLYBK ISO PWM 16DIP |
| MC44608P75G | IC REG CTRLR FLYBK ISO PWM 8-DIP |
| MC7810ECDTX | IC REG LDO 10V 1A DPAK |
| MC7818CD2TR4G | IC REG LDO 18V 1A D2PAK |
| MC78L05ABPX | IC REG LDO 5V .1A TO-92 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MC44605 | 制造商:ONSEMI 制造商全称:ON Semiconductor 功能描述:High Safety, Latched Mode, GreenLine PWM Controller for (Multi)Synchronized Applications |
| MC44605_06 | 制造商:ONSEMI 制造商全称:ON Semiconductor 功能描述:High Safety, Latched Mode, GreenLine TM PWM Controller for (Multi) Synchronized Applications |
| MC44605P | 功能描述:电流型 PWM 控制器 Greenline PWM RoHS:否 制造商:Texas Instruments 开关频率:27 KHz 上升时间: 下降时间: 工作电源电压:6 V to 15 V 工作电源电流:1.5 mA 输出端数量:1 最大工作温度:+ 105 C 安装风格:SMD/SMT 封装 / 箱体:TSSOP-14 |
| MC44605PG | 功能描述:电流型 PWM 控制器 ANA SMPS PWM FREQ CONT RoHS:否 制造商:Texas Instruments 开关频率:27 KHz 上升时间: 下降时间: 工作电源电压:6 V to 15 V 工作电源电流:1.5 mA 输出端数量:1 最大工作温度:+ 105 C 安装风格:SMD/SMT 封装 / 箱体:TSSOP-14 |
| MC44608 | 制造商:ONSEMI 制造商全称:ON Semiconductor 功能描述:Few External Components Reliable Flexible GreenLine Very High Voltage PWM Controller |
发布紧急采购，3分钟左右您将得到回复。