参数资料
型号: MC68HC05C8AP
厂商: FREESCALE SEMICONDUCTOR INC
元件分类: 微控制器/微处理器
英文描述: 8-BIT, MROM, 2.1 MHz, MICROCONTROLLER, PDIP40
封装: PLASTIC, DIP-40
文件页数: 58/116页
文件大小: 781K
代理商: MC68HC05C8AP
Timer
MC68HC05C8A MC68HCL05C8A MC68HSC05C8A Data Sheet, Rev. 5.1
46
Freescale Semiconductor
8.6 Timer Status Register
The timer status register (TSR) is a read-only register containing three status flag bits.
ICF — Input Capture Flag
1 = Flag set when selected polarity edge is sensed by input capture edge detector
0 = Flag cleared when TSR and input capture low register ($15) are accessed
OCF — Output Compare Flag
1 = Flag set when output compare register contents match the free-running counter contents
0 = Flag cleared when TSR and output compare low register ($17) are accessed
TOF — Timer Overflow Flag
1 = Flag set when free-running counter transition from $FFFF to $0000 occurs
0 = Flag cleared when TSR and counter low register ($19) are accessed
Bits 0–4 — Not used
Always read 0
Accessing the timer status register satisfies the first condition required to clear status bits. The remaining
step is to access the register corresponding to the status bit.
A problem can occur when using the timer overflow function and reading the free-running counter at
random times to measure an elapsed time. Without incorporating the proper precautions into software,
the timer overflow flag could unintentionally be cleared if:
1.
The timer status register is read or written when TOF is set.
2.
The LSB of the free-running counter is read but not for the purpose of servicing the flag.
The counter alternate register at addresses $1A and $1B contains the same value as the free-running
counter (at address $18 and $19); therefore, this alternate register can be read at any time without
affecting the timer overflow flag in the timer status register.
8.7 Timer During Wait Mode
The central processor unit (CPU) clock halts during wait mode, the timer remains active. If interrupts are
enabled, a timer interrupt will cause the processor to exit the wait mode.
8.8 Timer During Stop Mode
In stop mode, the timer stops counting and holds the last count value if stop is exited by an interrupt. If
reset is used, the counter is forced to $FFFC. During stop, if at least one valid input capture edge occurs
at the TCAP pin, the input capture detect circuit is armed. This does not set any timer flags or wake up
the microcontroller unit (MCU). But if the MCU exits stop due to an external interrupt, there is an active
input capture flag and data from the first valid edge that occurred during the stop mode. If reset is used
to exit stop mode, then no input capture flag or data remains, even if a valid input capture edge occurred.
Address:
$0013
Bit 7
654321
Bit 0
Read:
ICF
OCF
TOF
00000
Write:
Reset:
U
00000
= Unimplemented
U = Unaffected
Figure 8-4. Timer Status Register (TSR)
相关PDF资料
PDF描述
MC68HC705B16NMFN 8-BIT, OTPROM, 2.1 MHz, MICROCONTROLLER, PQCC52
MC68HC908GZ60VFJ 8-BIT, FLASH, 8 MHz, MICROCONTROLLER, PQFP32
MC68HLC908JK3CP 8-BIT, FLASH, 4 MHz, MICROCONTROLLER, PDIP20
MC908MR8CDWR2 8-BIT, FLASH, 8.2 MHz, MICROCONTROLLER, PDSO28
MC9S12DG128CPV 16-BIT, FLASH, 25 MHz, MICROCONTROLLER, PQFP112
相关代理商/技术参数
参数描述
MC68HC05C9 制造商:FREESCALE 制造商全称:Freescale Semiconductor, Inc 功能描述:TECHNICAL DATA
MC68HC05C9A 制造商:FREESCALE 制造商全称:Freescale Semiconductor, Inc 功能描述:Microcontrollers
MC68HC05C9AB 制造商:FREESCALE 制造商全称:Freescale Semiconductor, Inc 功能描述:Microcontrollers
MC68HC05C9AFB 制造商:FREESCALE 制造商全称:Freescale Semiconductor, Inc 功能描述:Microcontrollers
MC68HC05C9AFN 制造商:FREESCALE 制造商全称:Freescale Semiconductor, Inc 功能描述:Microcontrollers