- 您现在的位置：买卖IC网 > PDF目录80570 > MC68HC05E1DWR2 (MOTOROLA INC) 8-BIT, MROM, 2.1 MHz, MICROCONTROLLER, PDSO28 PDF资料下载
参数资料
| 型号： | MC68HC05E1DWR2 |
| 厂商： | MOTOROLA INC |
| 元件分类： | 微控制器/微处理器 |
| 英文描述： | 8-BIT, MROM, 2.1 MHz, MICROCONTROLLER, PDSO28 |
| 封装： | SOIC-28 |
| 文件页数： | 35/86页 |
| 文件大小： | 491K |
| 代理商： | MC68HC05E1DWR2 |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页当前第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页第47页第48页第49页第50页第51页第52页第53页第54页第55页第56页第57页第58页第59页第60页第61页第62页第63页第64页第65页第66页第67页第68页第69页第70页第71页第72页第73页第74页第75页第76页第77页第78页第79页第80页第81页第82页第83页第84页第85页第86页
General Release Specication
MC68HC05E1 — Revision 2.0
40
CPU Core
MOTOROLA
CPU Core
3.5.10 Inherent
In the inherent addressing mode, all the information necessary to
execute the instruction is contained in the opcode. Operations specifying
only the index register and/or accumulator as well as the control
instructions with no other arguments are included in this mode. These
instructions are one byte long.
3.6 Resets
The MCU can be reset three ways: by the initial power-on reset function,
by an active low input to the RESET pin, by a COP watchdog-timer reset,
and by the ILADR bit being set in the test register.
3.6.1 Power-On Reset (POR)
An internal reset is generated on power-up to allow the internal clock
generator to stabilize. The power-on reset is strictly for power turn-on
conditions and should not be used to detect a drop in the power supply
voltage. There is a 4064 internal processor clock cycle (tcyc) oscillator
stabilization delay after the oscillator becomes active. If the RESET pin
is low at the end of this 4064 cycle delay, the MCU will remain in the
reset condition until RESET goes high.
3.6.2 RESET Pin
The MCU is reset when a logic zero is applied to the RESET input for a
period of one and one-half machine cycles (tcyc). RESET is an input-only
pin and will not indicate when an internal reset has occurred.
3.6.3 Computer Operating Properly (COP) Reset
The MCU contains a watchdog timer that automatically times out if not
reset (cleared) within a specific time by a program reset sequence. If the
COP watchdog timer is allowed to timeout, an internal reset is generated
to reset the MCU. Because the internal reset signal is used, the MCU
相关PDF资料 |
PDF描述 |
|---|---|
| MC68HC05P6P | 8-BIT, MROM, 2.1 MHz, MICROCONTROLLER, PDIP28 |
| MSU2958C25-009J | 8-BIT, FLASH, 25 MHz, MICROCONTROLLER, PQCC44 |
| MSU2958C16-010U | 8-BIT, FLASH, 16 MHz, MICROCONTROLLER, PQFP44 |
| MSU2958C40-013U | 8-BIT, FLASH, 40 MHz, MICROCONTROLLER, PQFP44 |
| MSU2958C40-027J | 8-BIT, FLASH, 40 MHz, MICROCONTROLLER, PQCC44 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MC68HC05E5 | 制造商:FREESCALE 制造商全称:Freescale Semiconductor, Inc 功能描述:General Release Specification |
| MC68HC05E5DW | 制造商:FREESCALE 制造商全称:Freescale Semiconductor, Inc 功能描述:General Release Specification |
| MC68HC05E5P | 制造商:FREESCALE 制造商全称:Freescale Semiconductor, Inc 功能描述:General Release Specification |
| MC68HC05E6 | 制造商:FREESCALE 制造商全称:Freescale Semiconductor, Inc 功能描述:HCMOS Microcontroller Unit |
| MC68HC05E6CDW | 制造商:FREESCALE 制造商全称:Freescale Semiconductor, Inc 功能描述:HCMOS Microcontroller Unit |
发布紧急采购，3分钟左右您将得到回复。