参数资料
型号: MC9S12DP512MPV
厂商: MOTOROLA INC
元件分类: 微控制器/微处理器
英文描述: 16-BIT, FLASH, 25 MHz, MICROCONTROLLER, PQFP112
封装: LQFP-112
文件页数: 124/124页
文件大小: 1963K
代理商: MC9S12DP512MPV
MC9S12DP512 Device Guide V01.21
99
A.3 NVM, Flash and EEPROM
NOTE:
Unless otherwise noted the abbreviation NVM (Non Volatile Memory) is used for
both Flash and EEPROM.
A.3.1 NVM timing
The time base for all NVM program or erase operations is derived from the oscillator. A minimum
oscillator frequency fNVMOSC is required for performing program or erase operations. The NVM modules
do not have any means to monitor the frequency and will not prevent program or erase operation at
frequencies above or below the specified minimum. Attempting to program or erase the NVM modules at
a lower frequency a full program or erase transition is not assured.
The Flash and EEPROM program and erase operations are timed using a clock derived from the oscillator
using the FCLKDIV and ECLKDIV registers respectively. The frequency of this clock must be set within
the limits specified as fNVMOP.
The minimum program and erase times shown in Table A-11 are calculated for maximum fNVMOP and
maximum fbus. The maximum times are calculated for minimum fNVMOP and a fbus of 2MHz.
A.3.1.1 Single Word Programming
The programming time for single word programming is dependant on the bus frequency as a well as on
the frequency fNVMOP and can be calculated according to the following formula.
A.3.1.2 Row Programming
This applies only to the Flash where up to 64 words in a row can be programmed consecutively by keeping
the command pipeline filled. The time to program a consecutive word can be calculated as:
The time to program a whole row is:
Row programming is more than 2 times faster than single word programming.
A.3.1.3 Sector Erase
Erasing a 1024 byte Flash sector or a 4 byte EEPROM sector takes:
t
swpgm
9
1
f
NVMOP
---------------------
25
1
f
bus
----------
+
=
t
bwpgm
4
1
f
NVMOP
---------------------
9
1
f
bus
----------
+
=
t
brpgm
t
swpgm
63 t
bwpgm
+
=
t
era
4000
1
f
NVMOP
---------------------
相关PDF资料
PDF描述
MC9S12DP512VPV 16-BIT, FLASH, 25 MHz, MICROCONTROLLER, PQFP112
MC9S12DP512CPV 16-BIT, FLASH, 25 MHz, MICROCONTROLLER, PQFP112
MC9S12DT128EMFU 16-BIT, FLASH, 25 MHz, MICROCONTROLLER, PQFP80
MC9S12DT128ECFU 16-BIT, FLASH, 25 MHz, MICROCONTROLLER, PQFP80
MCF51CN128CGT 32-BIT, FLASH, 50.33 MHz, MICROCONTROLLER, QCC48
相关代理商/技术参数
参数描述
MC9S12DP512MPVE 功能描述:16位微控制器 - MCU 16 Bit 25MHz RoHS:否 制造商:Texas Instruments 核心:RISC 处理器系列:MSP430FR572x 数据总线宽度:16 bit 最大时钟频率:24 MHz 程序存储器大小:8 KB 数据 RAM 大小:1 KB 片上 ADC:Yes 工作电源电压:2 V to 3.6 V 工作温度范围:- 40 C to + 85 C 封装 / 箱体:VQFN-40 安装风格:SMD/SMT
MC9S12DP512MPVE 制造商:Freescale Semiconductor 功能描述:16-Bit Microcontroller IC
MC9S12DP512VPV 制造商:Freescale Semiconductor 功能描述:
MC9S12DP512VPVE 功能描述:16位微控制器 - MCU Whale Shark 512K FLASH 25 MHZ RoHS:否 制造商:Texas Instruments 核心:RISC 处理器系列:MSP430FR572x 数据总线宽度:16 bit 最大时钟频率:24 MHz 程序存储器大小:8 KB 数据 RAM 大小:1 KB 片上 ADC:Yes 工作电源电压:2 V to 3.6 V 工作温度范围:- 40 C to + 85 C 封装 / 箱体:VQFN-40 安装风格:SMD/SMT
MC9S12DT128BCPV 功能描述:16位微控制器 - MCU 16 Bit 25MHz RoHS:否 制造商:Texas Instruments 核心:RISC 处理器系列:MSP430FR572x 数据总线宽度:16 bit 最大时钟频率:24 MHz 程序存储器大小:8 KB 数据 RAM 大小:1 KB 片上 ADC:Yes 工作电源电压:2 V to 3.6 V 工作温度范围:- 40 C to + 85 C 封装 / 箱体:VQFN-40 安装风格:SMD/SMT