参数资料
型号: MCIMX31VMN5CR2
厂商: FREESCALE SEMICONDUCTOR INC
元件分类: 微控制器/微处理器
英文描述: 532 MHz, MICROPROCESSOR, PBGA473
封装: 19 X 19 MM, 0.80 MM PITCH, ROHS COMPLIANT, MAPBGA-473
文件页数: 112/122页
文件大小: 1418K
代理商: MCIMX31VMN5CR2
Signal Descriptions
MCIMX31/MCIMX31L Technical Data, Rev. 4.1
Freescale Semiconductor
9
3
Signal Descriptions
Signal descriptions are in the reference manual. Special signal considerations are listed following this
paragraph. The BGA ball assignment is in Section 5, “Package Information and Pinout.”
Special Signal Considerations:
Tamper detect (GPIO1_6)
Tamper detect logic is used to issue a security violation. This logic is activated if the tamper detect
input is asserted.
The tamper detect logic is disabled after reset. After enabling the logic, it is impossible to disable
it until the next reset. The GPR[16] bit functions as the tamper detect enable bit.
GPIO1_6 functions similarly to other I/O with GPIO capabilities regardless of the status of the
tamper detect enable bit. (For example, the GPIO1_6 can function as an input with GPIO
capabilities, such as sampling through PSR or generating interrupts.)
Power ready (GPIO1_5)
The power ready input, GPIO1_5, should be connected to an external power management IC power
ready output signal. If not used, GPIO1_5 must either be (a) externally pulled-up to NVCC1 or (b)
a no connect, internally pulled-up by enabling the on-chip pull-up resistor. GPIO1_5 is a dedicated
input and cannot be used as a general-purpose input/output.
SJC_MOD
SJC_MOD must be externally connected to GND for normal operation. Termination to GND
through an external pull-down resistor (such as 1 k
Ω) is allowed, but the value should be much
smaller than the on-chip 100 k
Ω pull-up.
CE_CONTROL
CE_CONTROL is a reserved input and must be externally tied to GND through a 1 k
Ω resistor.
TTM_PAD
TTM_PAD is for Freescale factory use only. Control bits indicate pull-up/down disabled. However,
TTM_PAD is actually connected to an on-chip pull-down device. Users must either float this signal
or tie it to GND.
M_REQUEST and M_GRANT
These two signals are not utilized internally. The user should make no connection to these signals.
Clock Source Select (CLKSS)
The CLKSS is the input that selects the default reference clock source providing input to the DPLL.
To select CKIH, tie CLKSS to NVCC1. To select CKIL, tie CLKSS to ground. After initialization,
the reference clock source can be changed (initial setting is overwritten) by programming the
PRCS bits in the CCMR.
Because
of
an
order
from
the
United
States
International
Trade
Commission,
BGA-packaged
product
lines
and
part
numbers
indicated
here
currently
are
not
available
from
Freescale
for
import
or
sale
in
the
United
States
prior
to
September
2010:
i.MX31
Product
Family
相关PDF资料
PDF描述
MB95F108ANSPMC1 16-BIT, FLASH, 16.25 MHz, RISC MICROCONTROLLER, PQFP64
MB89PV530-201CF MICROCONTROLLER, CQFP64
MC9S08AC96CFGE 8-BIT, FLASH, 40 MHz, MICROCONTROLLER, PQFP44
MPC8572CVTATLB 32-BIT, 1200 MHz, MICROPROCESSOR, PBGA1023
MPC8572ECPXAVLB 32-BIT, 1500 MHz, MICROPROCESSOR, PBGA1023
相关代理商/技术参数
参数描述
MCIMX31WPDK 功能描述:开发板和工具包 - ARM I.MX31 WINCE PDK RoHS:否 制造商:Arduino 产品:Development Boards 工具用于评估:ATSAM3X8EA-AU 核心:ARM Cortex M3 接口类型:DAC, ICSP, JTAG, UART, USB 工作电源电压:3.3 V
MCIMX32LVK5 制造商:Freescale Semiconductor 功能描述:MX32 14X14 - Bulk
MCIMX32VK5 制造商:Freescale Semiconductor 功能描述:MX32 14X14 - Tape and Reel
MCIMX32VK5R2 制造商:Freescale Semiconductor 功能描述:MX32 14X14 - Tape and Reel
MCIMX35 制造商:FREESCALE 制造商全称:Freescale Semiconductor, Inc 功能描述:Multimedia Applications Processor for Automotive Products