- 您现在的位置：买卖IC网 > PDF目录45328 > MK2069-03GITR (INTEGRATED DEVICE TECHNOLOGY INC) 160 MHz, OTHER CLOCK GENERATOR, PDSO56 PDF资料下载
参数资料
| 型号： | MK2069-03GITR |
| 厂商： | INTEGRATED DEVICE TECHNOLOGY INC |
| 元件分类： | 时钟产生/分配 |
| 英文描述： | 160 MHz, OTHER CLOCK GENERATOR, PDSO56 |
| 封装： | 6.10 MM, 0.50 MM PITCH, TSSOP-56 |
| 文件页数： | 4/20页 |
| 文件大小： | 204K |
| 代理商： | MK2069-03GITR |
MK2069-03
VCXO-BASED CLOCK TRANSLATOR WITH HIGH MULTIPLICATION
VCXO AND SYNTHESIZER
IDT / ICS VCXO-BASED CLOCK TRANSLATOR WITH HIGH MULTIPLICATION 12
MK2069-03
REV J 030906
should be no signal traces near the crystal or the traces.
Also refer to the Optional Crystal Shielding section that
follows.
4) To minimize EMI the 33
Ω series termination resistor, if
needed, should be placed close to the clock output.
5) All components should be on the same side of the board,
minimizing vias through other signal layers (the ferrite bead
and bulk decoupling capacitor may be mounted on the
back). Other signal traces should be routed away from the
MK2069-03. This includes signal traces on PCB traces just
underneath the device, or on layers adjacent to the ground
plane layer used by the device.
6) Because each input selection pin includes an internal
pull-up device, those inputs requiring a logic high state (“1”)
can be left unconnected. The pins requiring a logic low state
(“0”) can be grounded.
Optional Crystal Shielding
The crystal and connection traces to pins X1 and X2 are
sensitive to noise pickup. In applications that are especially
sensitive to noise, such as SONET or G-Bit ethernet
transceivers, some or all of the following crystal shielding
techniques should be considered. This is especially
important when the MK2069-03 is placed near high speed
logic or signal traces.
The following techniques are illustrated on the
Recommended PCB Layout drawing.
1) The metal layer underneath the crystal section should be
the ground layer. Remove all other layers that are above.
This ground layer will help shield the crystal circuit from
other system noise sources. As an alternative, all layers
underneath the crystal can be removed, however this is not
recommended if there are adjacent PCBs that can induce
noise into the unshielded crystal circuit.
2) Cut a channel in the PCB ground plane around the crystal
area as shown. This will eliminate high frequency ground
currents that can couple into the crystal circuit.
3) Add a through-hole for the optional third lead offered by
the crystal manufacturer (case ground). The requirement for
this third lead can be made at prototype evaluation. The
crystal is less sensitive to system noise interference when
the case is grounded.
4) Add a ground trace around the crystal circuit to shield
from other active traces on the component layer.
The external crystal is particularly sensitive to other system
clock sources that are at or near the crystal frequency since
it will try to lock to the interfering clock source. The crystal
should be keep away from these clock sources.
The IDT Applications Note MAN05 may also be referenced
for additional suggestions on layout of the crystal section.
相关PDF资料 |
PDF描述 |
|---|---|
| MK2069-03GITR | 160 MHz, OTHER CLOCK GENERATOR, PDSO56 |
| MK2069-04GITR | 160 MHz, OTHER CLOCK GENERATOR, PDSO56 |
| MK2069-04GI | 160 MHz, OTHER CLOCK GENERATOR, PDSO56 |
| MK20DN512ZVLL10 | RISC MICROCONTROLLER, PQFP100 |
| MK20DN512ZVLQ10 | 32-BIT, FLASH, 100 MHz, RISC MICROCONTROLLER, PQFP144 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MK2069-04 | 制造商:ICS 制造商全称:ICS 功能描述:VCXO-Based Universal Clock Translator |
| MK2069-04GI | 功能描述:IC VCXO CLK TRANSLATOR 56-TSSOP RoHS:否 类别:集成电路 (IC) >> 时钟/计时 - 时钟发生器，PLL，频率合成器 系列:- 标准包装:39 系列:- 类型:* PLL:带旁路 输入:时钟 输出:时钟 电路数:1 比率 - 输入:输出:1:10 差分 - 输入:输出:是/是 频率 - 最大:170MHz 除法器/乘法器:无/无 电源电压:2.375 V ~ 3.465 V 工作温度:0°C ~ 70°C 安装类型:* 封装/外壳:* 供应商设备封装:* 包装:* |
| MK2069-04GILF | 功能描述:时钟发生器及支持产品 VCXO-BASED UNIVERSAL CLOCK TRANSLATOR RoHS:否 制造商:Silicon Labs 类型:Clock Generators 最大输入频率:14.318 MHz 最大输出频率:166 MHz 输出端数量:16 占空比 - 最大:55 % 工作电源电压:3.3 V 工作电源电流:1 mA 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:QFN-56 |
| MK2069-04GILFTR | 功能描述:时钟发生器及支持产品 VCXO-BASED UNIVERSAL CLOCK TRANSLATOR RoHS:否 制造商:Silicon Labs 类型:Clock Generators 最大输入频率:14.318 MHz 最大输出频率:166 MHz 输出端数量:16 占空比 - 最大:55 % 工作电源电压:3.3 V 工作电源电流:1 mA 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:QFN-56 |
| MK2069-04GITR | 功能描述:IC VCXO CLK TRANSLATOR 56-TSSOP RoHS:否 类别:集成电路 (IC) >> 时钟/计时 - 时钟发生器，PLL，频率合成器 系列:- 标准包装:39 系列:- 类型:* PLL:带旁路 输入:时钟 输出:时钟 电路数:1 比率 - 输入:输出:1:10 差分 - 输入:输出:是/是 频率 - 最大:170MHz 除法器/乘法器:无/无 电源电压:2.375 V ~ 3.465 V 工作温度:0°C ~ 70°C 安装类型:* 封装/外壳:* 供应商设备封装:* 包装:* |
发布紧急采购，3分钟左右您将得到回复。