- 您现在的位置：买卖IC网 > PDF目录45328 > MK2069-04GI (INTEGRATED DEVICE TECHNOLOGY INC) 160 MHz, OTHER CLOCK GENERATOR, PDSO56 PDF资料下载
参数资料
| 型号： | MK2069-04GI |
| 厂商： | INTEGRATED DEVICE TECHNOLOGY INC |
| 元件分类： | 时钟产生/分配 |
| 英文描述： | 160 MHz, OTHER CLOCK GENERATOR, PDSO56 |
| 封装： | 6.10 MM, 0.50 MM PITCH, TSSOP-56 |
| 文件页数： | 18/21页 |
| 文件大小： | 410K |
| 代理商： | MK2069-04GI |
MK2069-04
VCXO-BASED UNIVERSAL CLOCK TRANSLATOR
VCXO AND SYNTHESIZER
IDT VCXO-BASED UNIVERSAL CLOCK TRANSLATOR
6
MK2069-04
REV J 051310
the pullable range of the crystal. This is guaranteed to be
±115 ppm minimum. This tracking range in ppm also applies
to the input clock and all clock outputs if the device is to
remain frequency locked to the input, which is required for
normal operation.
Setting TCLK Output Frequency
The clock frequency of TCLK is determined by:
Where:
FT Divider = 2, 4, 6, 8, 10, 12, 14 or 16
The frequency range of TCLK is set by the operational range
of the internal VCO circuit and the output divider selections:
Where:
f(VCO) = 40 to 320 MHz
ST Divider = 2,4,8 or 16
A higher VCO frequency will generally produce lower phase
noise and therefore is preferred.
MK2069-04 Loop Response and JItter
Attenuation Characteristics
The MK2069-04 will reduce the transfer of phase jitter
existing on the input reference clock to the output clock. This
operation is known as jitter attenuation. The low-pass
frequency response of the VCXO PLL loop is the
mechanism that provides input jitter attenuation. Clock jitter,
more accurately called phase jitter, is the overall instability
of the clock period which can be measured in the time
domain using an oscilloscope, for instance. Jitter is
comprised of phase noise which can be represented in the
frequency domain. The phase noise of the input reference
clock is attenuated according to the VCXO PLL low-pass
frequency response curve. The response curve, and thus
the jitter attenuation characteristics, can be established
through the selection of external MK2069-04 passive
components and other device setting as explained in the
following section.
Setting the VCXO PLL Loop Response.
The VCXO PLL loop response is determined both by fixed
device characteristics and by variables set by the user. This
includes the values of RS, CS, CP and RSET as shown in the
External VCXO PLL Components figure on this page.
The VCXO PLL loop bandwidth is approximated by:
Where:
RS = Value of resistor RS in loop filter in Ohms
ICP = Charge pump current in amps
(see table on page 7)
KO = VCXO Gain in Hz/V
(see table on page 8)
SV Divider = 1,2,12 or 16
FV Divider = 1 to 4096
The above equation calculates the “normalized” loop
bandwidth (denoted as “NBW”) which is approximately
equal to the - 3dB bandwidth. NBW does not take into
account the effects of damping factor or the second pole
imposed by CP. It does, however, provide a useful
approximation of filter performance.
To prevent jitter on VCLK due to modulation of the VCXO
PLL by the phase detector frequency, the following general
rule should be observed:
.
The PLL loop damping factor is determined by:
f(TCLK)
FT Divider
f(VCLK)
×
=
f(TCLK)
f(VCO)
ST Divider
-----------------------
=
NBW(VCO PLL)
RS
I
CP
×
K
O
×
2
π SV Divider
×
FV Divider
×
-----------------------------------------------------------------------------
=
NBW(VCO PLL)
f(Phase Detector)
20
---------------------------------------
≤
DF(VCLK)
RS
2
------
I
CP
CS
×
K
O
×
SV Divider
FV Divider
×
---------------------------------------------------------------
×
=
相关PDF资料 |
PDF描述 |
|---|---|
| MK20DN512ZVLL10 | RISC MICROCONTROLLER, PQFP100 |
| MK20DN512ZVLQ10 | 32-BIT, FLASH, 100 MHz, RISC MICROCONTROLLER, PQFP144 |
| MK20DX128ZVMD10 | 32-BIT, FLASH, 100 MHz, RISC MICROCONTROLLER, PBGA144 |
| MK20DX128ZVMD10R | 32-BIT, FLASH, 100 MHz, RISC MICROCONTROLLER, PBGA144 |
| MK20DX256ZVLQ10 | 32-BIT, FLASH, 100 MHz, RISC MICROCONTROLLER, PQFP144 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MK2069-04GILF | 功能描述:时钟发生器及支持产品 VCXO-BASED UNIVERSAL CLOCK TRANSLATOR RoHS:否 制造商:Silicon Labs 类型:Clock Generators 最大输入频率:14.318 MHz 最大输出频率:166 MHz 输出端数量:16 占空比 - 最大:55 % 工作电源电压:3.3 V 工作电源电流:1 mA 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:QFN-56 |
| MK2069-04GILFTR | 功能描述:时钟发生器及支持产品 VCXO-BASED UNIVERSAL CLOCK TRANSLATOR RoHS:否 制造商:Silicon Labs 类型:Clock Generators 最大输入频率:14.318 MHz 最大输出频率:166 MHz 输出端数量:16 占空比 - 最大:55 % 工作电源电压:3.3 V 工作电源电流:1 mA 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:QFN-56 |
| MK2069-04GITR | 功能描述:IC VCXO CLK TRANSLATOR 56-TSSOP RoHS:否 类别:集成电路 (IC) >> 时钟/计时 - 时钟发生器，PLL，频率合成器 系列:- 标准包装:39 系列:- 类型:* PLL:带旁路 输入:时钟 输出:时钟 电路数:1 比率 - 输入:输出:1:10 差分 - 输入:输出:是/是 频率 - 最大:170MHz 除法器/乘法器:无/无 电源电压:2.375 V ~ 3.465 V 工作温度:0°C ~ 70°C 安装类型:* 封装/外壳:* 供应商设备封装:* 包装:* |
| MK206N 454634/1/MK | 制造商:NSF (CONTROLS) 功能描述:WAFER MK 2POLE 6 POS 制造商:NSF (CONTROLS) 功能描述:WAFER, MK, 2POLE, 6 POS 制造商:NSF (CONTROLS) 功能描述:WAFER, MK, 2POLE, 6 POS; For Use With:Rotary Switches; No. of Poles:2; No. of Positions:6; SVHC:No SVHC (19-Dec-2012); Contact Current @ Contact Voltage AC Max:500mA; Contact Current AC Max:5A; Contact Current DC Max:5A; Contact ;RoHS Compliant: Yes |
| MK206S 454634MK | 制造商:NSF (CONTROLS) 功能描述:WAFER MK 2POLE 6 POS 制造商:NSF (CONTROLS) 功能描述:WAFER, MK, 2POLE, 6 POS 制造商:NSF (CONTROLS) 功能描述:WAFER, MK, 2POLE, 6 POS; No. of Poles:2; No. of Positions:6; SVHC:No SVHC (19-Dec-2012); Contact Current @ Contact Voltage AC Max:500mA; Contact Current AC Max:5A; Contact Current DC Max:5A; Contact Current Rating:5A; Contact ;RoHS Compliant: Yes |
发布紧急采购，3分钟左右您将得到回复。