- 您现在的位置：买卖IC网 > PDF目录45333 > ML67Q5002LA (OKI ELECTRIC INDUSTRY CO LTD) 32-BIT, FLASH, 60 MHz, RISC MICROCONTROLLER, PBGA144 PDF资料下载
参数资料
| 型号： | ML67Q5002LA |
| 厂商： | OKI ELECTRIC INDUSTRY CO LTD |
| 元件分类： | 微控制器/微处理器 |
| 英文描述： | 32-BIT, FLASH, 60 MHz, RISC MICROCONTROLLER, PBGA144 |
| 封装： | 11 X 11 MM, 0.80 MM PITCH, PLASTIC, LFBGA-144 |
| 文件页数： | 16/20页 |
| 文件大小： | 650K |
| 代理商： | ML67Q5002LA |
Oki Semiconductor 5
ML675001/ML67Q5002/ML67Q5003
April 2004, Rev 2.0
Pulse Width Modulation
The ML675001/Q5002/Q5003 contains two Pulse Width Modulation (PWM)
channels that can change the duty cycle of a waveform with a constant
period. The PWM output resolution is 16 bits for each channel.
A/D Converter
Successive approximation type A/D converter.
1. 10 bits x 4 channels
2. Sample and hold function
3. Scan mode and select mode are supported
4. Interrupt is generated after completion of conversion.
5. Conversion time: 5 s (min).
Power Management
HALT, STANDBY and clock gear clock functions are supported as power save
functions.
1. HALT mode
HALT object
- CPU, internal RAM, AHB bus control
HALT mode setting: Set by the system control register.
Exit HALT mode due to: Reset, interrupt
2. STANDBY mode
Stops the clock for the entire device.
STANDBY mode setting: Specied by the system control register.
Exit STANDBY mode due to: Reset, external interrupt (other than EFIQ_N)
3. Clock gear
The device has two clock systems, HCLK and CCLK. Configure HCLK
and CCLK frequency.
HCLK: CPU, bus control, synchronous serial interface, I2C.
CCLK: Timers, PWM, SIO, AD converter, etc.
4. Clock control by each function unit
A/D converter, PWM, Timers, DRAMC, DMAC, UART(FIFO), SIO, Syn-
chronous SIO, I2C.
Built-In Flash ROM Programming
The robust features of the ash permit simple and optimized programming of
the ash-ROM.
1. There are three methods for programming the FLASH-ROM
- Programming via the JTAG interface.
- Programming using boot mode. Boot mode is used by the host to down-
load data to the FLASH ROM via the UART interface.
A program stored in the on-chip boot ROM is used to transfer the
incoming serial data on the UART interface to the internal Flash ROM.
- Programming via a user application running from external memory
Internal ash can be programmed by executing a user ash program-
ming application from external memory.
2. Single power source for reading and programming of FLASH: 3.0V to
3.6V
3. Programming units: 2 bytes
4. Selectable erasing size
- Sector erase: 2 Kbytes/sector
- Block erase: 64 Kbytes/block
- Chip erase: All memory cell
5. Word program time: 20 sec (2 bytes)
6. Sector/block erase time: 25 msec
7. Chip erase time: 100 msec
8. Write protection
- Block protect: top address 8Kwords can be protected
- Chip protect: all words can be protected
9. Number of commands: 9
10. Highly reliable read/program
- Sector programming: 1,000 times
- Data hold period: 10 years
相关PDF资料 |
PDF描述 |
|---|---|
| ML675001LA | 32-BIT, 60 MHz, RISC MICROCONTROLLER, PBGA144 |
| ML67Q5003TC | 32-BIT, FLASH, 60 MHz, RISC MICROCONTROLLER, PQFP144 |
| ML675001TC | 32-BIT, 60 MHz, RISC MICROCONTROLLER, PQFP144 |
| ML67Q5002TC | 32-BIT, FLASH, 60 MHz, RISC MICROCONTROLLER, PQFP144 |
| ML67Q5002LA | 32-BIT, FLASH, 60 MHz, RISC MICROCONTROLLER, PBGA144 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ML67Q5002-NNNLA | 制造商:ROHM Semiconductor 功能描述: |
| ML67Q5002-NNNTC | 制造商:ROHM Semiconductor 功能描述: |
| ML67Q5002TC | 制造商:ROHM Semiconductor 功能描述: |
| ML67Q5003 | 制造商:OKI 制造商全称:OKI electronic componets 功能描述:32-bit ARM-Based General-Purpose Microcontroller |
| ML67Q5003ALA | 制造商:ROHM Semiconductor 功能描述: |
发布紧急采购，3分钟左右您将得到回复。