- 您现在的位置：买卖IC网 > PDF目录296599 > MP2259DJ (MONOLITHIC POWER SYSTEMS INC) 1.8 A SWITCHING REGULATOR, 1400 kHz SWITCHING FREQ-MAX, PDSO6 PDF资料下载
参数资料
| 型号： | MP2259DJ |
| 厂商： | MONOLITHIC POWER SYSTEMS INC |
| 元件分类： | 稳压器 |
| 英文描述： | 1.8 A SWITCHING REGULATOR, 1400 kHz SWITCHING FREQ-MAX, PDSO6 |
| 封装： | MO-193AB, TSOT-23, 6 PIN |
| 文件页数： | 6/9页 |
| 文件大小： | 354K |
| 代理商： | MP2259DJ |
MP2259 – 1A, 16V, 1.4MHz STEP-DOWN CONVERTER
MP2259 Rev. 0.91
www.MonolithicPower.com
6
1/14/2008
MPS Proprietary Information. Unauthorized Photocopy and Duplication Prohibited.
2008 MPS. All Rights Reserved.
OPERATION
The MP2259 is a current mode buck regulator.
with EA output voltage proportional to the peak
inductor current.
At the beginning of a cycle, M1 is off. The EA
output voltage is higher than the current sense
amplifier output, and the current comparator’s
output is low. The rising edge of the 1.4MHz
CLK signal sets the RS Flip-Flop. Its output
turns on M1 then connects the SW pin and
inductor to the input supply.
The increasing inductor current is sensed and
amplified by the Current Sense Amplifier. Ramp
compensation is summed to Current Sense
Amplifier output and compared to the Error
Amplifier output by the PWM Comparator.
When the sum of the Current Sense Amplifier
output and the Slope Compensation signal
exceeds the EA output voltage, the RS Flip-
Flop is reset and M1 is turned off. The external
Schottky rectifier diode (D1) conducts the
inductor current.
If the sum of the Current Sense Amplifier output
and the Slope Compensation signal does not
exceed the EA output for a whole cycle, then
the falling edge of the CLK resets the Flip-Flop.
The output of the Error Amplifier integrates the
voltage difference between the feedback and
the 0.8V bandgap reference. The polarity is
such that a FB pin voltage lower than 0.8V
increases the EA output voltage. Since the EA
output voltage is proportional to the peak
inductor current, an increase in its voltage
increases current delivered to the output.
5
IN
EN
FB
GND
SW
BST
4
3
2
1
6
REGULATOR
OSCILLATOR
1.4MHz
DRIVER
CURRENT SENSE
AMPLIFIER
ERROR
AMPLIFIER
CURRENT
LIMIT
COMPARATOR
PWM
COMPARATOR
MP2259_F01_BD01
x20
M1
REGULATOR
REFERENCE
EA
--
+
--
+
--
+
S
R
Q
--
+
27pF
1pF
Figure 1—Functional Block Diagram
相关PDF资料 |
PDF描述 |
|---|---|
| MP2562DS-LF | SWITCHING REGULATOR, 4800 kHz SWITCHING FREQ-MAX, PDSO8 |
| MP258W | |
| MP254W | |
| MP2510W | |
| MP252W | |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MP2259DT | 制造商:MPS 制造商全称:Monolithic Power Systems 功能描述:1A, 16V, 1.4MHz Step-Down Converter |
| MP2270 | 制造商:MPS 制造商全称:Monolithic Power Systems 功能描述:1.8A，24V，700kHz |
| MP2270DH | 制造商:MPS 制造商全称:Monolithic Power Systems 功能描述:1.8A, 24V, 700kHz Step-Down Converter |
| MP-229064-10-8A | 功能描述:打印机 MP-229064-10-8A RoHS:否 制造商:Seiko Instruments 产品:Printer 电源电压: 每行点数:9 x 320 打印速度:52.5 cps, 80 cps 纸张宽度:112 mm |
| MP-22C | 制造商:未知厂家 制造商全称:未知厂家 功能描述:SILICON PLANAR PHTODIODES |
发布紧急采购，3分钟左右您将得到回复。