参数资料
型号: MSC1214Y3PAGRG4
厂商: TEXAS INSTRUMENTS INC
元件分类: 微控制器/微处理器
英文描述: 8-BIT, FLASH, 40 MHz, MICROCONTROLLER, PQFP64
封装: GREEN, PLASTIC, TQFP-64
文件页数: 71/111页
文件大小: 1102K
代理商: MSC1214Y3PAGRG4
MSC1211, MSC1212
MSC1213,MSC1214
SBAS323G JUNE 2004 REVISED OCTOBER 2007
www.ti.com
62
I2C Start (I2CSTART) (Available only on the MSC1211 and MSC1213)
7
6
5
4
3
2
1
0
Reset Value
SFR 9Eh
80h
I2CSTART
I2C Start. Write-only. When any value is written to this register, the I2C system is reset; that is, the counters
bits 70
and state machines will go back to the initial state. So, in multi-master mode when arbitration is lost, then the I2C
should be reset so that the counters and finite state machines (FSMs) are brought back to the idle state.
SPI Buffer Start Address (SPISTART)
7
6
5
4
3
2
1
0
Reset Value
SFR 9Eh
1
80h
SPISTART
SPI FIFO Start Address. Write-only. This specifies the start address of the SPI data buffer. This is a circular FIFO
bits 60
that is located in the 128 bytes of indirect RAM. The FIFO starts at this address and ends at the address specified
in SPIEND. Must be less than SPIEND. Writing clears SPI transmit and receive counters.
SPITP
SPI Transmit Pointer. Read-only. This is the FIFO address for SPI transmissions. This is where the next byte will
bits 60
be written into the byte will be written into the SPI FIFO buffer. This pointer increments after each write to the SPI Data
register unless that would make it equal to the SPI Receive pointer.
SPI Buffer End Address (SPIEND)
7
6
5
4
3
2
1
0
Reset Value
SFR 9Fh
1
80h
SPIEND
SPI FIFO End Address. Write-only. This specifies the end address of the SPI data FIFO. This is a circular buffer that
bits 60
is located in the 128 bytes of indirect RAM. The buffer starts at SPISTART and ends at this address.
SPIRP
SPI Receive Pointer. Read-only. This is the FIFO address for SPI received bytes. This is the location of the next byte
bits 60
to be read from the SPI FIFO. This increments with each read from the SPI Data register until the RxCNT is zero.
Port 2 (P2)
7
6
5
4
3
2
1
0
Reset Value
SFR A0h
FFh
P2
Port 2. This port functions as an address bus during external memory access, and as a general-purpose I/O port.
bits 70
During external memory cycles, this port will contain the MSB of the address. Whether Port 2 is used as
general-purpose I/O or for external memory access is determined by the Flash Configuration Register (HCR1.0).
相关PDF资料
PDF描述
MSC1214Y2PAGTG4 8-BIT, FLASH, 40 MHz, MICROCONTROLLER, PQFP64
MSC1214Y2PAGR 8-BIT, FLASH, 40 MHz, MICROCONTROLLER, PQFP64
MSC1212Y3PAGR 8-BIT, FLASH, 40 MHz, MICROCONTROLLER, PQFP64
MSC1211Y2PAGR 8-BIT, FLASH, 40 MHz, MICROCONTROLLER, PQFP64
MSC1211Y3PAGR 8-BIT, FLASH, 40 MHz, MICROCONTROLLER, PQFP64
相关代理商/技术参数
参数描述
MSC1214Y3PAGT 功能描述:数据转换系统 Prec A/D & D/A w/ 8051 Mcntrl & Flash RoHS:否 制造商:Texas Instruments 转换速率:0.001 MSPs 分辨率:24 bit 最大工作温度:+ 125 C 最小工作温度:- 40 C 安装风格:SMD/SMT 封装 / 箱体:TQFP-64 封装:Reel
MSC1214Y3PAGTG4 功能描述:数据转换系统 Prec A/D & D/A with 8051 MCU and FL Mem RoHS:否 制造商:Texas Instruments 转换速率:0.001 MSPs 分辨率:24 bit 最大工作温度:+ 125 C 最小工作温度:- 40 C 安装风格:SMD/SMT 封装 / 箱体:TQFP-64 封装:Reel
MSC1214Y4 制造商:TI 制造商全称:Texas Instruments 功能描述:Precision Analog-to-Digital Converter (ADC) and Digital-to-Analog Converters (DACs) with 8051 Microcontroller and Flash Memory
MSC1214Y4PAGR 功能描述:数据转换系统 Prec A/D & D/A w/ 8051 Mcntrl & Flash RoHS:否 制造商:Texas Instruments 转换速率:0.001 MSPs 分辨率:24 bit 最大工作温度:+ 125 C 最小工作温度:- 40 C 安装风格:SMD/SMT 封装 / 箱体:TQFP-64 封装:Reel
MSC1214Y4PAGRG4 功能描述:数据转换系统 24B ADC 16B DAC 16kB RoHS:否 制造商:Texas Instruments 转换速率:0.001 MSPs 分辨率:24 bit 最大工作温度:+ 125 C 最小工作温度:- 40 C 安装风格:SMD/SMT 封装 / 箱体:TQFP-64 封装:Reel