- 您现在的位置：买卖IC网 > PDF目录378679 > MTB10N40E (MOTOROLA INC) TMOS POWER FET 10 AMPERES PDF资料下载
参数资料
| 型号： | MTB10N40E |
| 厂商： | MOTOROLA INC |
| 元件分类： | JFETs |
| 英文描述： | TMOS POWER FET 10 AMPERES |
| 中文描述： | 10 A, 400 V, 0.55 ohm, N-CHANNEL, Si, POWER, MOSFET |
| 文件页数： | 5/10页 |
| 文件大小： | 273K |
| 代理商： | MTB10N40E |
5
Motorola TMOS Power MOSFET Transistor Device Data
td(off)
10000
1000
100
10
t
RG, GATE RESISTANCE (OHMS)
10
100
1000
1
DRAIN–TO–SOURCE DIODE CHARACTERISTICS
Figure 8. Gate–To–Source and Drain–To–Source
Voltage versus Total Charge
Figure 9. Resistive Switching Time
Variation versus Gate Resistance
Figure 10. Diode Forward Voltage versus Current
V
0
8
4
0
Qg, TOTAL CHARGE (nC)
16
12
20
40
80
60
VDD = 200 V
ID
≈
10 A
VGS = 10 V
TJ = 25
°
C
VSD, SOURCE–TO–DRAIN VOLTAGE (VOLTS)
I
10
9
8
7
6
3
2
0
1
4
5
1.2
1
0.8
0.6
0.4
0.2
tf
tr
td(on)
VGS = 0 V
TJ = 25
°
C
TJ = 25
°
C
ID = 10 A
VDS = 100 V
250 V
320 V
20
40
200
400
2000
4000
SAFE OPERATING AREA
The Forward Biased Safe Operating Area curves define
the maximum simultaneous drain–to–source voltage and
drain current that a transistor can handle safely when it is for-
ward biased. Curves are based upon maximum peak junc-
tion temperature and a case temperature (TC) of 25
°
C. Peak
repetitive pulsed power limits are determined by using the
thermal response data in conjunction with the procedures
discussed in AN569, “Transient Thermal Resistance–Gener-
al Data and Its Use.”
Switching between the off–state and the on–state may tra-
verse any load line provided neither rated peak current (IDM)
nor rated voltage (VDSS) is exceeded and the transition time
(tr,tf) do not exceed 10
μ
s. In addition the total power aver-
aged over a complete switching cycle must not exceed
(TJ(MAX) – TC)/(R
θ
JC).
A Power MOSFET designated E–FET can be safely used
in switching circuits with unclamped inductive loads. For reli-
able operation, the stored energy from circuit inductance dis-
sipated in the transistor while in avalanche must be less than
the rated limit and adjusted for operating conditions differing
from those specified. Although industry practice is to rate in
terms of energy, avalanche energy capability is not a con-
stant. The energy rating decreases non–linearly with an in-
crease of peak current in avalanche and peak junction
temperature.
Although many E–FETs can withstand the stress of drain–
to–source avalanche at currents up to rated pulsed current
(IDM), the energy rating is specified at rated continuous cur-
rent (ID), in accordance with industry custom. The energy rat-
ing must be derated for temperature as shown in the
accompanying graph (Figure 12). Maximum energy at cur-
rents below rated continuous ID can safely be assumed to
equal the values indicated.
相关PDF资料 |
PDF描述 |
|---|---|
| MTB1306 | TMOS POWER FET 75 AMPERES |
| MTB15N06E | TMOS POWER FET 15 AMPERES |
| MTB15N06V | TMOS POWER FET 15 AMPERES |
| MTB16N25E | TMOS POWER FET 16 AMPERES |
| MTB20N20E | TMOS POWER FET 20 AMPERES 200 VOLTS |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MTB10N40ET4 | 制造商:Rochester Electronics LLC 功能描述:- Bulk |
| MTB10SA | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Full-Size (7.3mm or 4.7mm height) |
| MTB10SAM | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Full-Size (7.3mm or 4.7mm height) |
| MTB10SAV | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Full-Size (7.3mm or 4.7mm height) |
| MTB10SAVM | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Full-Size (7.3mm or 4.7mm height) |
发布紧急采购，3分钟左右您将得到回复。