参数资料
型号: MUNICH128X
厂商: SIEMENS A G
元件分类: 微控制器/微处理器
英文描述: 4 CHANNEL(S), 8.192M bps, LOCAL AREA NETWORK CONTROLLER, PQFP160
封装: METRIC, PLASTIC, QFP-160
文件页数: 18/39页
文件大小: 227K
代理商: MUNICH128X
MUNICH128X
Pin Descriptions
Semiconductor Group
25
1997-12-01
146
GNT
t/s
Grant
This signal is asserted by the arbiter to grant control of
the PCI to the MUNICH128X in response to a bus
request via REQ. After GNT is asserted, the
MUNICH128X will begin a bus transaction only after
the current bus Master has deasserted the FRAME
signal.
GNT is sampled on the rising edge of CLK.
145
CLK
I
Clock
Provides timing for all PCI transactions. Most PCI
signals are sampled or output relative to the rising
edge of CLK. The maximum CLK frequency is
33 MHz.
142
RST
I
Reset
An active RST signal brings all PCI registers,
sequencers and signals into a consistent state. All PCI
output signals are driven to their initial state.
57
INTA
O
(o/d)
Interrupt Request
When an interrupt status is active and unmasked, the
MUNICH128X activates this open-drain output.
Examples of interrupt sources are
transmission/reception error, completion of transmit or
receive packets etc. The MUNICH128X deactivates
INTA when the global interrupt status register STAT is
read.
INTA is activated/deactivated asynchronous to the
CLK.
Table 5
Pin Descriptions by Functional Block (cont’d)
PCI Interface
Pin No.
Symbol
Type Description
相关PDF资料
PDF描述
MUPA64K16-15TJI SPECIALTY MICROPROCESSOR CIRCUIT, PQFP128
MUR1005FCT 10 A, 50 V, SILICON, RECTIFIER DIODE, TO-220AB
MUR1020FCT 10 A, 200 V, SILICON, RECTIFIER DIODE, TO-220AB
MUR1030FCT 10 A, 300 V, SILICON, RECTIFIER DIODE, TO-220AB
MUR1040FCT 10 A, 400 V, SILICON, RECTIFIER DIODE, TO-220AB
相关代理商/技术参数
参数描述
MUP-110-1 制造商:Novotechnik 功能描述:
mur 制造商:Datak Corporation 功能描述:
MUR 120G 制造商:ON Semiconductor 功能描述:Bulk
MUR 3 制造商:Crouzet 功能描述:Bulk
MUR 3020WTPBF 制造商:Vishay 功能描述:Bulk