- 您现在的位置：买卖IC网 > PDF目录19223 > NCV7361ADG (ON Semiconductor)IC REG LDO 5V 50MA 8-SOIC PDF资料下载
参数资料
| 型号： | NCV7361ADG |
| 厂商： | ON Semiconductor |
| 文件页数： | 18/27页 |
| 文件大小： | 0K |
| 描述： | IC REG LDO 5V 50MA 8-SOIC |
| 产品变化通告： | Product Discontinuation 27/Jan/2012 |
| 标准包装： | 98 |
| 稳压器拓扑结构： | 正，固定式 |
| 输出电压： | 5V |
| 输入电压： | 5.25 V ~ 18 V |
| 稳压器数量： | 1 |
| 电流 - 输出： | 50mA |
| 工作温度： | -40°C ~ 125°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 8-SOIC（0.154"，3.90mm 宽） |
| 供应商设备封装： | 8-SOICN |
| 包装： | 管件 |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页当前第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页
NCV7361A
APPLICATION HINTS
LIN System Parameter
Bus Loading Requirements
Parameter
Operating Voltage Range
Voltage Drop of Reverse Protection Diode
Voltage Drop at the Series Diode in Pull Up Path
Battery Shift Voltage
Ground Shift Voltage
Master Termination Resistor
Slave Termination Resistor
Number of System Nodes
Total Length of Bus Line
Line Capacitance
Capacitance of Master Node
Capacitance of Slave Node
Total Capacitance of the Bus including Slave and Master Capacitance
Network Total Resistance
Time Constant of Overall System
Symbol
V BAT
V Drop_rev
V SerDiode
V Shift_BAT
V Shift_GND
R master
R slave
N
LEN BUS
C LINE
C Master
C Slave
C BUS
R Network
t
Min
8.0
0.4
0.4
0
0
900
20
2
?
?
?
?
1.0
537
1.0
Typ
?
0.7
0.7
?
?
1000
30
?
?
100
220
220
4.0
?
?
Max
18
1.0
1.0
0.1
0.1
1100
60
16
40
150
?
250
10
863
5.0
Unit
V
V
V
V BAT
V BAT
W
k W
?
m
pF/m
pF
pF
nF
W
m s
Recommendations for System Design
The goal of the LIN physical layer standard is to have a
universal definition of the LIN system for plug and play
solutions in LIN networks up to 20 kbd bus speeds.
In case of small and medium LIN networks, it’s
recommended to adjust the total network capacitance to at
least 4.0 nF for good EMC and EMI behavior. This can be
done by setting only the master node capacitance. The
slave node capacitance should have a unit load of typically
220 pF for good EMC/EMI behavior.
In large networks with long bus lines and the maximum
number of nodes, some system parameters can exceed the
defined limits and the LIN system designer must intervene.
The whole capacitance of a slave node is not only the unit
load capacitor itself. Additionally, there is the capacitance
of wires and connectors, and the internal capacitance of the
LIN transmitter. This internal capacitance is strongly
dependent on the technology of the IC manufacturer and
should be in the range of 30 pF to 150 pF. If the bus lines
have a total length of nearly 40m, the total bus capacitance
can exceed the LIN system limit of 10 nF.
A second parameter of concern is the integrated slave
termination resistor tolerance. If most of the slave nodes
have a slave termination resistance near by the allowed
maximum of 60 k W , the total network resistance is more
than 700 W . Even if the total network capacitance is below
or equal to the maximum specified value of 10 nF, the
network time constant is higher than 7.0 m s.
This problem can be solved only by adjusting the master
termination resistor to the required maximum network time
constant of 5.0 m s (max).
The LIN bus output driver of the NCV7361A provides a
higher drive capability than necessary (40 mA @ 1.2 V)
within the LIN standard (33.6 mA @ 1.2 V). With this
driver stage the system designer can increase the maximum
LIN networks with a total network capacitance of more
than 10 nF. The total network resistance can be
decreased to:
Rtl_min + (VBat_max * VBUSdom) IBUS_max
+ (18 V * 1.2 V) 40 mA + 420 W
NOTE: The NCV7361A meets the requirements for
implementation in RC ? based slave nodes. The LIN
Protocol Specification requires the deviation of the slave
node clock to the master node clock after synchronization
must not differ by more than " 2%.
Setting the network time constant is necessary in large
networks (primary resistance) and also in small networks
(primary capacitance).
http://onsemi.com
18
相关PDF资料 |
PDF描述 |
|---|---|
| TAJE106K035RNJ | CAP TANT 10UF 35V 10% 2917 |
| VI-JTM-CW-S | CONVERTER MOD DC/DC 10V 100W |
| HWS50-48/HD | PWR SUP IND 48V 52.8W 1.1A |
| HCC44DRAS-S734 | CONN EDGECARD 88POS .100 R/A PCB |
| MUR460RLG | DIODE ULTR FAST 4A 600V DO-201AD |
相关代理商/技术参数 |
参数描述 |
|---|---|
| NCV7361ADR2 | 功能描述:低压差稳压器 - LDO LDO REG w/Integrated RoHS:否 制造商:Texas Instruments 最大输入电压:36 V 输出电压:1.4 V to 20.5 V 回动电压（最大值）:307 mV 输出电流:1 A 负载调节:0.3 % 输出端数量: 输出类型:Fixed 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-20 |
| NCV7361ADR2G | 功能描述:低压差稳压器 - LDO ANA 10mA PLUS LIN RoHS:否 制造商:Texas Instruments 最大输入电压:36 V 输出电压:1.4 V to 20.5 V 回动电压（最大值）:307 mV 输出电流:1 A 负载调节:0.3 % 输出端数量: 输出类型:Fixed 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-20 |
| NCV7380 | 制造商:ONSEMI 制造商全称:ON Semiconductor 功能描述:LIN Transceiver |
| NCV7380/D | 制造商:未知厂家 制造商全称:未知厂家 功能描述:LIN Transceiver |
| NCV7380_07 | 制造商:ONSEMI 制造商全称:ON Semiconductor 功能描述:LIN Transceiver |
发布紧急采购，3分钟左右您将得到回复。