参数资料
型号: OM13006,598
厂商: NXP Semiconductors
文件页数: 31/51页
文件大小: 0K
描述: BOARD EVAL EM773 METER EU PLUG
其它有关文件: EM773 Energy Metering IC Training
设计资源: Plug Meter Schematics, Gerber Files
USB Dongle Schematics, Gerber Files
标准包装: 1
主要目的: 电源管理,电度表/功率表
嵌入式: 是,MCU,32 位
已用 IC / 零件: EM773FHN33,551
已供物品:
相关产品: 568-5213-ND - IC ENERGY METER ARM 32VQFN
其它名称: 568-6681
EM773
All information provided in this document is subject to legal disclaimers.
NXP B.V. 2012. All rights reserved.
Product data sheet
Rev. 2 — 3 January 2012
37 of 51
NXP Semiconductors
EM773
Energy metering IC
[6]
The maximum tf for the SDA and SCL bus lines is specified at 300 ns. The maximum fall time for the SDA
output stage tf is specified at 250 ns. This allows series protection resistors to be connected in between the
SDA and the SCL pins and the SDA/SCL bus lines without exceeding the maximum specified tf.
[7]
In Fast-mode Plus, fall time is specified the same for both output stage and bus timing. If series resistors
are used, designers should allow for this when considering bus timing.
[8]
The maximum tHD;DAT could be 3.45 s and 0.9 s for Standard-mode and Fast-mode but must be less than
the maximum of tVD;DAT or tVD;ACK by a transition time (see UM10204). This maximum must only be met if
the device does not stretch the LOW period (tLOW) of the SCL signal. If the clock stretches the SCL, the
data must be valid by the set-up time before it releases the clock.
[9]
tSU;DAT is the data set-up time that is measured with respect to the rising edge of SCL; applies to data in
transmission and the acknowledge.
[10] A Fast-mode I2C-bus device can be used in a Standard-mode I2C-bus system but the requirement
tSU;DAT = 250 ns must then be met. This will automatically be the case if the device does not stretch the
LOW period of the SCL signal. If such a device does stretch the LOW period of the SCL signal, it must
output the next data bit to the SDA line tr(max) + tSU;DAT = 1000 + 250 = 1250 ns (according to the
Standard-mode I2C-bus specification) before the SCL line is released. Also the acknowledge timing must
meet this set-up time.
10.7 SPI interface
Fig 19. I2C-bus pins clock timing
002aaf425
tf
70 %
30 %
SDA
tf
70 %
30 %
S
70 %
30 %
70 %
30 %
tHD;DAT
SCL
1 / fSCL
70 %
30 %
70 %
30 %
tVD;DAT
tHIGH
tLOW
tSU;DAT
Table 14.
Dynamic characteristics of SPI pins in SPI mode
Symbol
Parameter
Conditions
Min
Typ
Max
Unit
SPI master (in SPI mode)
Tcy(clk)
clock cycle time
full-duplex mode
50
-
ns
when only transmitting [1]
40
ns
tDS
data set-up time
in SPI mode
2.4 V
V
DD 3.6 V
15
-
ns
2.0 V
V
DD < 2.4 V
20
ns
1.8 V
V
DD < 2.0 V
24
-
ns
tDH
data hold time
in SPI mode
0-
-
ns
tv(Q)
data output valid time in SPI mode
--
10
ns
th(Q)
data output hold time in SPI mode
0-
-
ns
相关PDF资料
PDF描述
CM252016-680KL INDUCTOR CHIP 68UH 2520 SMD
ECM25DRXN CONN EDGECARD 50POS DIP .156 SLD
VI-J4P-EX CONVERTER MOD DC/DC 13.8V 75W
SI5319-EVB BOARD EVALUATION SI5319
EMM11DSEN-S243 CONN EDGECARD 22POS .156 EYELET
相关代理商/技术参数
参数描述
OM13007 制造商:NXP Semiconductors 功能描述:KIT DEV FOR MPT612 制造商:NXP Semiconductors 功能描述:DEV KIT, FOR MPT612 制造商:NXP Semiconductors 功能描述:DEV KIT, FOR MPT612; SVHC:No SVHC (19-Dec-2012); Kit Features:Low Power High Performance, High Value, LPC1102, with 32KB Of Flash, 8KB of RAM; MCU Supported Families:MPT612
OM13007,598 功能描述:开发板和工具包 - ARM MPT612 IC REFERENCE BOARD RoHS:否 制造商:Arduino 产品:Development Boards 工具用于评估:ATSAM3X8EA-AU 核心:ARM Cortex M3 接口类型:DAC, ICSP, JTAG, UART, USB 工作电源电压:3.3 V
OM13008 制造商:NXP Semiconductors 功能描述:LPC1227, LPCXPRESSO, DEV BOARD 制造商:NXP Semiconductors 功能描述:LPCXpresso Board for LPC1200 Series Development Board 制造商:NXP Semiconductors 功能描述:LPCXpresso Board for LPC1200 Low-Cost Development Board ARM Cortex-M0 MCU 制造商:NXP Semiconductors 功能描述:LPC1227, LPCXPRESSO, DEV BOARD; Silicon Manufacturer:NXP; Core Architecture:ARM; Core Sub-Architecture:Cortex-M0; Silicon Core Number:LPC12xx; Silicon Family Name:LPC122X; Features:Development Board for LPC122X Microcontroller; ;RoHS Compliant: Yes 制造商:NXP 功能描述:LPCXpresso Board for LPC1200 Low-Cost Development Board ARM Cortex-M0 MCU
OM13008, 598 制造商:NXP Semiconductors 功能描述:
OM13008,598 功能描述:开发板和工具包 - ARM LPCXpresso Board RoHS:否 制造商:Arduino 产品:Development Boards 工具用于评估:ATSAM3X8EA-AU 核心:ARM Cortex M3 接口类型:DAC, ICSP, JTAG, UART, USB 工作电源电压:3.3 V