参数资料
型号: OM13006,598
厂商: NXP Semiconductors
文件页数: 4/51页
文件大小: 0K
描述: BOARD EVAL EM773 METER EU PLUG
其它有关文件: EM773 Energy Metering IC Training
设计资源: Plug Meter Schematics, Gerber Files
USB Dongle Schematics, Gerber Files
标准包装: 1
主要目的: 电源管理,电度表/功率表
嵌入式: 是,MCU,32 位
已用 IC / 零件: EM773FHN33,551
已供物品:
相关产品: 568-5213-ND - IC ENERGY METER ARM 32VQFN
其它名称: 568-6681
EM773
All information provided in this document is subject to legal disclaimers.
NXP B.V. 2012. All rights reserved.
Product data sheet
Rev. 2 — 3 January 2012
12 of 51
NXP Semiconductors
EM773
Energy metering IC
7.8 UART
The EM773 contains one UART.
Support for RS-485/9-bit mode allows both software address detection and automatic
address detection using 9-bit mode.
The UART includes a fractional baud rate generator. Standard baud rates such as
115200 Bd can be achieved with any crystal frequency above 2 MHz.
7.8.1 Features
Maximum UART data bit rate of 3.125 MBit/s.
16 Byte Receive and Transmit FIFOs.
Register locations conform to 16C550 industry standard.
Receiver FIFO trigger points at 1 B, 4 B, 8 B, and 14 B.
Built-in fractional baud rate generator covering wide range of baud rates without a
need for external crystals of particular values.
FIFO control mechanism that enables software flow control implementation.
Support for RS-485/9-bit mode.
Support for modem control.
7.9 SPI serial I/O controller
The SPI controller is capable of operation on a SSP, 4-wire SSI, or Microwire bus. It can
interact with multiple masters and slaves on the bus. Only a single master and a single
slave can communicate on the bus during a given data transfer. The SPI supports full
duplex transfers, with frames of 4 bits to 16 bits of data flowing from the master to the
slave and from the slave to the master. In practice, often only one of these data flows
carries meaningful data.
7.9.1 Features
Maximum SPI speed of 25 Mbit/s (master) or 4.17 Mbit/s (slave) (in SSP mode)
Compatible with Motorola SPI, 4-wire Texas Instruments SSI, and National
Semiconductor Microwire buses
Synchronous serial communication
Master or slave operation
8-frame FIFOs for both transmit and receive
4-bit to 16-bit frame
7.10 I2C-bus serial I/O controller
The EM773 contains one I2C-bus controller.
The I2C-bus is bidirectional for inter-IC control using only two wires: a Serial Clock Line
(SCL) and a Serial DAta line (SDA). Each device is recognized by a unique address and
can operate as either a receiver-only device (e.g., an LCD driver) or a transmitter with the
capability to both receive and send information (such as memory). Transmitters and/or
相关PDF资料
PDF描述
CM252016-680KL INDUCTOR CHIP 68UH 2520 SMD
ECM25DRXN CONN EDGECARD 50POS DIP .156 SLD
VI-J4P-EX CONVERTER MOD DC/DC 13.8V 75W
SI5319-EVB BOARD EVALUATION SI5319
EMM11DSEN-S243 CONN EDGECARD 22POS .156 EYELET
相关代理商/技术参数
参数描述
OM13007 制造商:NXP Semiconductors 功能描述:KIT DEV FOR MPT612 制造商:NXP Semiconductors 功能描述:DEV KIT, FOR MPT612 制造商:NXP Semiconductors 功能描述:DEV KIT, FOR MPT612; SVHC:No SVHC (19-Dec-2012); Kit Features:Low Power High Performance, High Value, LPC1102, with 32KB Of Flash, 8KB of RAM; MCU Supported Families:MPT612
OM13007,598 功能描述:开发板和工具包 - ARM MPT612 IC REFERENCE BOARD RoHS:否 制造商:Arduino 产品:Development Boards 工具用于评估:ATSAM3X8EA-AU 核心:ARM Cortex M3 接口类型:DAC, ICSP, JTAG, UART, USB 工作电源电压:3.3 V
OM13008 制造商:NXP Semiconductors 功能描述:LPC1227, LPCXPRESSO, DEV BOARD 制造商:NXP Semiconductors 功能描述:LPCXpresso Board for LPC1200 Series Development Board 制造商:NXP Semiconductors 功能描述:LPCXpresso Board for LPC1200 Low-Cost Development Board ARM Cortex-M0 MCU 制造商:NXP Semiconductors 功能描述:LPC1227, LPCXPRESSO, DEV BOARD; Silicon Manufacturer:NXP; Core Architecture:ARM; Core Sub-Architecture:Cortex-M0; Silicon Core Number:LPC12xx; Silicon Family Name:LPC122X; Features:Development Board for LPC122X Microcontroller; ;RoHS Compliant: Yes 制造商:NXP 功能描述:LPCXpresso Board for LPC1200 Low-Cost Development Board ARM Cortex-M0 MCU
OM13008, 598 制造商:NXP Semiconductors 功能描述:
OM13008,598 功能描述:开发板和工具包 - ARM LPCXpresso Board RoHS:否 制造商:Arduino 产品:Development Boards 工具用于评估:ATSAM3X8EA-AU 核心:ARM Cortex M3 接口类型:DAC, ICSP, JTAG, UART, USB 工作电源电压:3.3 V