参数资料
型号: P89LPC901FD,112
厂商: NXP Semiconductors
文件页数: 31/53页
文件大小: 0K
描述: IC 80C51 MCU FLASH 1K 8-SOIC
产品培训模块: Migrating from 8/16-Bit MCUs to 32-Bit ARMs
标准包装: 1
系列: LPC900
核心处理器: 8051
芯体尺寸: 8-位
速度: 18MHz
外围设备: 欠压检测/复位,LED,POR,PWM,WDT
输入/输出数: 6
程序存储器容量: 1KB(1K x 8)
程序存储器类型: 闪存
RAM 容量: 128 x 8
电压 - 电源 (Vcc/Vdd): 2.4 V ~ 3.6 V
振荡器型: 内部
工作温度: -40°C ~ 85°C
封装/外壳: 8-SOIC(0.154",3.90mm 宽)
包装: 剪切带 (CT)
配用: 622-1009-ND - BOARD FOR LPC901 8-DIP
622-1008-ND - BOARD FOR LPC9103 10-HVSON
622-1006-ND - SOCKET ADAPTER BOARD
622-1002-ND - USB IN-CIRCUIT PROG LPC9XX
568-1759-ND - EMULATOR DEBUGGER/PROGRMMR LPC9X
其它名称: 568-1994-1
Philips Semiconductors
P89LPC901/902/903
8-bit microcontrollers with two-clock 80C51 core
Product data
Rev. 05 — 17 December 2004
37 of 53
9397 750 14465
Koninklijke Philips Electronics N.V. 2004. All rights reserved.
8.18.9
Transmit interrupts with double buffering enabled (Modes 1, 2 and 3)
Unlike the conventional UART, in double buffering mode, the Tx interrupt is generated
when the double buffer is ready to receive new data.
8.18.10
The 9th bit (bit 8) in double buffering (Modes 1, 2 and 3)
If double buffering is disabled TB8 can be written before or after SBUF is written, as
long as TB8 is updated some time before that bit is shifted out. TB8 must not be
changed until the bit is shifted out, as indicated by the Tx interrupt.
If double buffering is enabled, TB8 must be updated before SBUF is written, as TB8
will be double-buffered together with SBUF data.
8.19 Analog comparators
One analog comparator is provided on the P89LPC901. Two analog comparators are
provided on the P89LPC902 and P89LPC903 devices. Comparator operation is such
that the output is a logical one (which may be read in a register) when the positive
input is greater than the negative input (selectable from a pin or an internal reference
voltage). Otherwise the output is a zero. The comparator may be congured to cause
an interrupt when the output value changes.
The connections to the comparator are shown in Figure 19. Note: Not all possible
comparator congurations are available on all three devices. Please refer to the Logic
diagrams in Section 6 “Logic symbols” on page 12. The comparator functions to
VDD = 2.4 V.
When the comparator is rst enabled, the comparator output and interrupt ag are not
guaranteed to be stable for 10 microseconds. The comparator interrupt should not be
enabled during that time, and the comparator interrupt ag must be cleared before
the interrupt is enabled in order to prevent an immediate interrupt service.
When a comparator is disabled the comparator’s output, COx, goes HIGH. If the
comparator output was LOW and then is disabled, the resulting transition of the
comparator output from a LOW to HIGH state will set the comparator ag, CMFx.
This will cause an interrupt if the comparator interrupt is enabled. The user should
therefore disable the comparator interrupt prior to disabling the comparator.
Additionally, the user should clear the comparator ag, CMFx, after disabling the
comparator.
相关PDF资料
PDF描述
DS80C320-ENL IC MCU HI SPEED 33MHZ IND 44TQFP
DS80C323-END IC MCU HI SPEED 18MHZ IND 44TQFP
DS80C320-ENG IC MCU HI SPEED 25MHZ IND 44TQFP
DS89C450-ENG IC MCU FLASH 64KB 25MHZ 44-TQFP
DS89C440-QNL IC MCU FLASH 32KB 33MHZ 44-PLCC
相关代理商/技术参数
参数描述
P89LPC901FN 制造商:PHILIPS 制造商全称:NXP Semiconductors 功能描述:8-bit microcontrollers with two-clock 80C51 core 1 kB 3 V Flash with 128-byte RAM
P89LPC901FN,129 功能描述:8位微控制器 -MCU 80C51 1K FL 128B RAM RoHS:否 制造商:Silicon Labs 核心:8051 处理器系列:C8051F39x 数据总线宽度:8 bit 最大时钟频率:50 MHz 程序存储器大小:16 KB 数据 RAM 大小:1 KB 片上 ADC:Yes 工作电源电压:1.8 V to 3.6 V 工作温度范围:- 40 C to + 105 C 封装 / 箱体:QFN-20 安装风格:SMD/SMT
P89LPC901FN.129 制造商:NXP Semiconductors 功能描述:8BIT MCU 1K FLASH 89LC901 DIP8 制造商:NXP Semiconductors 功能描述:8BIT MCU 1K FLASH, 89LC901, DIP8
P89LPC901FN129 制造商:NXP Semiconductors 功能描述:IC 8BIT MCU 80C51 12MHZ DIP-8
P89LPC902 制造商:PHILIPS 制造商全称:NXP Semiconductors 功能描述:8-bit microcontrollers with two-clock 80C51 core 1 kB 3 V Flash with 128-byte RAM