- 您现在的位置：买卖IC网 > Datasheet目录349 > PCA9551BS,118 (NXP Semiconductors)IC LED DRIVER BLINKER 16-HVQFN Datasheet资料下载
参数资料
| 型号： | PCA9551BS,118 |
| 厂商： | NXP Semiconductors |
| 文件页数： | 5/26页 |
| 文件大小： | 0K |
| 描述： | IC LED DRIVER BLINKER 16-HVQFN |
| 产品培训模块： | LED Controllers I²C Bus Fundamentals |
| 标准包装： | 1 |
| 拓扑： | 开路漏极，PWM |
| 输出数： | 8 |
| 内部驱动器： | 是 |
| 类型 - 主要： | LED 闪烁器 |
| 频率： | 400kHz |
| 电源电压： | 2.3 V ~ 5.5 V |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 16-VQFN 裸露焊盘 |
| 供应商设备封装： | 16-HVQFN |
| 包装： | 标准包装 |
| 工作温度： | -40°C ~ 85°C |
| 产品目录页面： | 844 (CN2011-ZH PDF) |
| 配用： | 568-4002-ND - DEMO BOARD I2C 568-3615-ND - DEMO BOARD I2C |
| 其它名称： | 568-3388-6 |
NXP Semiconductors
PCA9551
8-bit I 2 C-bus LED driver with programmable blink rates
If the Auto-Increment (AI) ?ag is set, the three low order bits of the Control register are
automatically incremented after a read or write. This allows the user to program the
registers sequentially. The contents of these bits will rollover to ‘000’ after the last register
is accessed.
When the Auto-Increment ?ag is set (AI = 1) and a read sequence is initiated, the
sequence must start by reading a register different from ‘0' (B2 B1 B0 ≠ 000).
Only the 3 least signi?cant bits are affected by the AI ?ag. Unused bits must be
programmed with zeroes.
6.2.1 Control register de?nition
Table 3.
Register summary
B2
0
0
0
0
1
1
1
B1
0
0
1
1
0
0
1
B0
0
1
0
1
0
1
0
Symbol
INPUT
PSC0
PWM0
PSC1
PWM1
LS0
LS1
Access
read only
read/write
read/write
read/write
read/write
read/write
read/write
Description
input register
frequency prescaler 0
PWM register 0
frequency prescaler 1
PWM register 1
LED0 to LED3 selector
LED4 to LED7 selector
6.3 Register descriptions
6.3.1 INPUT - Input register
The INPUT register re?ects the state of the device pins. Writes to this register will be
acknowledged but will have no effect.
Table 4.
INPUT - Input register description
Bit
Symbol
Default
7
LED7
X
6
LED6
X
5
LED5
X
4
LED4
X
3
LED3
X
2
LED2
X
1
LED1
X
0
LED0
X
Remark: The default value ‘X’ is determined by the externally applied logic level (normally
logic 1) when used for directly driving LED with pull-up to V DD .
6.3.2 PSC0 - Frequency Prescaler 0
PSC0 is used to program the period of the PWM output.
The period of BLINK0 = (PSC0 + 1) / 38.
Remark: Prescaler calculation is different between the PCA9551 and other PCA955x
LED blinkers. A divider ratio of 38 instead of 44 is used. This different divider ratio causes
the blinking frequency to be 13 % (1 ? 38 / 44) lower when the same 8-bit word is used.
The programmed value of Frequency Prescaler 0 must be adjusted to compensate for this
difference in applications where the PCA9551 is used in conjunction with other PCA955x
LED blinkers and the observed blinking frequencies need to be the same.
PCA9551_8
? NXP B.V. 2008. All rights reserved.
Product data sheet
Rev. 08 — 31 July 2008
5 of 26
相关PDF资料 |
PDF描述 |
|---|---|
| PCA9552D,118 | IC LED DRIVER BLINKER 24-SOIC |
| PCA9553DP/01,118 | IC LED DRIVER LINEAR 8-TSSOP |
| PCA9624PW,118 | IC LED DRIVER RGBA 24-TSSOP |
| PCA9625D/S911,518 | IC LED DRIVER RGBA 32-SOIC |
| PCA9626BS,518 | IC LED DRIVER RGBA 48HVQFN |
相关代理商/技术参数 |
参数描述 |
|---|---|
| PCA9551BSHP | 功能描述:LED照明驱动器 RoHS:否 制造商:STMicroelectronics 输入电压:11.5 V to 23 V 工作频率: 最大电源电流:1.7 mA 输出电流: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:SO-16N |
| PCA9551BS-T | 功能描述:LED照明驱动器 8-BIT I2C FM OD LED BLK RST RoHS:否 制造商:STMicroelectronics 输入电压:11.5 V to 23 V 工作频率: 最大电源电流:1.7 mA 输出电流: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:SO-16N |
| PCA9551D | 制造商:PHILIPS 制造商全称:NXP Semiconductors 功能描述:8-bit I2C LED driver with programmable blink rates |
| PCA9551D,112 | 功能描述:LED照明驱动器 I2C LED BLINKER 8BIT RoHS:否 制造商:STMicroelectronics 输入电压:11.5 V to 23 V 工作频率: 最大电源电流:1.7 mA 输出电流: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:SO-16N |
| PCA9551D,118 | 功能描述:LED照明驱动器 8-BIT I2C FM OD LED BLK RST RoHS:否 制造商:STMicroelectronics 输入电压:11.5 V to 23 V 工作频率: 最大电源电流:1.7 mA 输出电流: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:SO-16N |
发布紧急采购，3分钟左右您将得到回复。