参数资料
| 型号： | PCA9672D,512 |
| 厂商： | NXP Semiconductors |
| 文件页数： | 35/36页 |
| 文件大小： | 0K |
| 描述： | IC I/O EXPANDER I2C 8B 16SOIC |
| 标准包装： | 48 |
| 接口： | I²C |
| 输入/输出数： | 8 |
| 中断输出： | 是 |
| 频率 - 时钟： | 1MHz |
| 电源电压： | 2.3 V ~ 5.5 V |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 16-SOIC（0.295"，7.50mm 宽） |
| 供应商设备封装： | 16-SO |
| 包装： | 管件 |
| 包括： | POR |
| 其它名称： | 935282746512 PCA9672D PCA9672D-ND |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页当前第35页第36页
PCA9672
All information provided in this document is subject to legal disclaimers.
NXP B.V. 2013. All rights reserved.
Product data sheet
Rev. 3 — 27 May 2013
8 of 36
NXP Semiconductors
PCA9672
Remote 8-bit I/O expander for Fm+ I2C-bus with interrupt and reset
7.2.2 Device ID (PCA9672 ID field)
The Device ID field is a 3-byte read-only (24 bits) word giving the following information:
12 bits with the manufacturer name, unique per manufacturer (for example, NXP).
9 bits with the part identification, assigned by manufacturer.
3 bits with the die revision, assigned by manufacturer (for example, Rev X).
The Device ID is read-only, hardwired in the device and can be accessed as follows:
1. START command
2. The master sends the Reserved Device ID I2C-bus address ‘1111 100’ with the R/W
bit set to 0 (write).
3. The master sends the I2C-bus slave address of the slave device it needs to identify.
The LSB is a ‘Don’t care’ value. Only one device must acknowledge this byte (the one
that has the I2C-bus slave address).
4. The master sends a Re-START command.
Remark: A STOP command followed by a START command will reset the slave state
machine and the Device ID read cannot be performed.
Remark: A STOP command or a Re-START command followed by an access to
another slave device will reset the slave state machine and the Device ID read cannot
be performed.
5. The master sends the Reserved Device ID I2C-bus address ‘1111 100’ with the R/W
bit set to 1 (read).
6. The device ID read can be done, starting with the 12 manufacturer bits (first byte +
4 MSB of the second byte), followed by the 9 part identification bits and then the
3 die revision bits (3 LSB of the third byte).
7. The master ends the reading sequence by NACKing the last byte, thus resetting the
slave device state machine and allowing the master to send the STOP command.
Remark: The reading of the Device ID can be stopped anytime by sending a NACK
command.
Remark: If the master continues to ACK the bytes after the third byte, the PCA9672
rolls back to the first byte and keeps sending the Device ID sequence until a NACK
has been detected.
For the PCA9672, the Device ID is as shown in Figure 10.
Fig 10. PCA9672 Device ID field
0
002aac326
0
1
0
1
0
1
0
revision
0
part identification
manufacturer
相关PDF资料 |
PDF描述 |
|---|---|
| PCA9672D,518 | IC I/O EXPANDER I2C 8B 16SOIC |
| 583859-9 | TW LF HSG 156 C/L |
| PCA9674PW,118 | IC I/O EXPANDER I2C 8B 16TSSOP |
| 1-583718-5 | CONN HOUSING 40POS DUAL .100 BLK |
| 530521-3 | HIGH CURRENT HSG 4 POS |
相关代理商/技术参数 |
参数描述 |
|---|---|
| PCA9672D-T | 功能描述:接口-I/O扩展器 8BIT I2C FM+ QB GPIO INT-RS PU RoHS:否 制造商:NXP Semiconductors 逻辑系列: 输入/输出端数量: 最大工作频率:100 kHz 工作电源电压:1.65 V to 5.5 V 工作温度范围:- 40 C to + 85 C 安装风格:SMD/SMT 封装 / 箱体:HVQFN-16 封装:Reel |
| PCA9672PW | 功能描述:接口-I/O扩展器 8BIT I2C FM+ QB GPIO INT-RS PU RoHS:否 制造商:NXP Semiconductors 逻辑系列: 输入/输出端数量: 最大工作频率:100 kHz 工作电源电压:1.65 V to 5.5 V 工作温度范围:- 40 C to + 85 C 安装风格:SMD/SMT 封装 / 箱体:HVQFN-16 封装:Reel |
| PCA9672PW,112 | 功能描述:接口-I/O扩展器 8BIT I2C FM+ QB GPIO RoHS:否 制造商:NXP Semiconductors 逻辑系列: 输入/输出端数量: 最大工作频率:100 kHz 工作电源电压:1.65 V to 5.5 V 工作温度范围:- 40 C to + 85 C 安装风格:SMD/SMT 封装 / 箱体:HVQFN-16 封装:Reel |
| PCA9672PW,118 | 功能描述:接口-I/O扩展器 8BIT I2C FM+ QB GPIO INT-RS PU RoHS:否 制造商:NXP Semiconductors 逻辑系列: 输入/输出端数量: 最大工作频率:100 kHz 工作电源电压:1.65 V to 5.5 V 工作温度范围:- 40 C to + 85 C 安装风格:SMD/SMT 封装 / 箱体:HVQFN-16 封装:Reel |
| PCA9672PW112 | 制造商:Rochester Electronics LLC 功能描述: 制造商:NXP 功能描述: 制造商:NXP Semiconductors 功能描述: |
发布紧急采购，3分钟左右您将得到回复。