参数资料
型号: PIC16F1527-E/MR
厂商: Microchip Technology
文件页数: 30/94页
文件大小: 0K
描述: MCU 28KB FLASH 1536B RAM 64-QFN
标准包装: 40
系列: PIC® XLP™ 16F
核心处理器: PIC
芯体尺寸: 8-位
速度: 20MHz
连通性: I²C,LIN,SPI,UART/USART
外围设备: 欠压检测/复位,POR,PWM,WDT
输入/输出数: 54
程序存储器容量: 28KB(16K x 14)
程序存储器类型: 闪存
RAM 容量: 1.5K x 8
电压 - 电源 (Vcc/Vdd): 2.3 V ~ 5.5 V
数据转换器: A/D 30x10b
振荡器型: 内部
工作温度: -40°C ~ 125°C
封装/外壳: 64-VFQFN 裸露焊盘
包装: 管件
198
7810C–AVR–10/12
Atmel ATmega328P [Preliminary]
The UDORDn bit in UCSRnC sets the frame format used by the USART in MSPIM mode. The
Receiver and Transmitter use the same setting. Note that changing the setting of any of these
bits will corrupt all ongoing communication for both the Receiver and Transmitter.
16-bit data transfer can be achieved by writing two data bytes to UDRn. A UART transmit com-
plete interrupt will then signal that the 16-bit value has been shifted out.
20.5.1
USART MSPIM Initialization
The USART in MSPIM mode has to be initialized before any communication can take place. The
initialization process normally consists of setting the baud rate, setting master mode of operation
(by setting DDR_XCKn to one), setting frame format and enabling the Transmitter and the
Receiver. Only the transmitter can operate independently. For interrupt driven USART opera-
tion, the Global Interrupt Flag should be cleared (and thus interrupts globally disabled) when
doing the initialization.
Note:
To ensure immediate initialization of the XCKn output the baud-rate register (UBRRn) must be
zero at the time the transmitter is enabled. Contrary to the normal mode USART operation the
UBRRn must then be written to the desired value after the transmitter is enabled, but before the
first transmission is started. Setting UBRRn to zero before enabling the transmitter is not neces-
sary if the initialization is done immediately after a reset since UBRRn is reset to zero.
Before doing a re-initialization with changed baud rate, data mode, or frame format, be sure that
there is no ongoing transmissions during the period the registers are changed. The TXCn Flag
can be used to check that the Transmitter has completed all transfers, and the RXCn Flag can
be used to check that there are no unread data in the receive buffer. Note that the TXCn Flag
must be cleared before each transmission (before UDRn is written) if it is used for this purpose.
The following simple USART initialization code examples show one assembly and one C func-
tion that are equal in functionality. The examples assume polling (no interrupts enabled). The
相关PDF资料
PDF描述
VE-21H-IY-B1 CONVERTER MOD DC/DC 52V 50W
VE-21F-IY-B1 CONVERTER MOD DC/DC 72V 50W
PIC16LF1527-E/MR MCU PIC 28KB FLASH 64QFN
VE-21B-IY-B1 CONVERTER MOD DC/DC 95V 50W
31-220N-RFX BNC ADAPTER BULKHEAD, 50 OHM
相关代理商/技术参数
参数描述
PIC16F1527-I/MR 功能描述:8位微控制器 -MCU 28KB FL 1536B RAM 10bit ADC 1.8-5.5V RoHS:否 制造商:Silicon Labs 核心:8051 处理器系列:C8051F39x 数据总线宽度:8 bit 最大时钟频率:50 MHz 程序存储器大小:16 KB 数据 RAM 大小:1 KB 片上 ADC:Yes 工作电源电压:1.8 V to 3.6 V 工作温度范围:- 40 C to + 105 C 封装 / 箱体:QFN-20 安装风格:SMD/SMT
PIC16F1527-I/MR 制造商:Microchip Technology Inc 功能描述:IC 8BIT MCU PIC16F 20 MHz 64-QFN 制造商:Microchip Technology Inc 功能描述:IC, 8BIT MCU, PIC16F, 20 MHz, 64-QFN; Controller Family/Series:PIC16F; Core Size:8bit; No. of I/O's:54; Program Memory Size:28KB; RAM Memory Size:1536Byte; CPU Speed:20MHz; Oscillator Type:External, Internal; No. of Timers:9 ;RoHS Compliant: No
PIC16F1527-I/PT 功能描述:8位微控制器 -MCU 14KB Flash RAM 768b nanoWatt RoHS:否 制造商:Silicon Labs 核心:8051 处理器系列:C8051F39x 数据总线宽度:8 bit 最大时钟频率:50 MHz 程序存储器大小:16 KB 数据 RAM 大小:1 KB 片上 ADC:Yes 工作电源电压:1.8 V to 3.6 V 工作温度范围:- 40 C to + 105 C 封装 / 箱体:QFN-20 安装风格:SMD/SMT
PIC16F1527-I/PT 制造商:Microchip Technology Inc 功能描述:IC 8BIT MCU PIC16F 20 MHz 64-TQFP 制造商:Microchip Technology Inc 功能描述:IC, 8BIT MCU, PIC16F, 20MHz, TQFP-64
PIC16F1527T-I/MR 功能描述:8位微控制器 -MCU 28KB FL 1536B RAM 10bit ADC 1.8-5.5V RoHS:否 制造商:Silicon Labs 核心:8051 处理器系列:C8051F39x 数据总线宽度:8 bit 最大时钟频率:50 MHz 程序存储器大小:16 KB 数据 RAM 大小:1 KB 片上 ADC:Yes 工作电源电压:1.8 V to 3.6 V 工作温度范围:- 40 C to + 105 C 封装 / 箱体:QFN-20 安装风格:SMD/SMT