- 您现在的位置：买卖IC网 > PDF目录21905 > PSE201 (SMC Corporation of America)SENSOR CONTROLLER 4CH 5OUT PNP PDF资料下载
参数资料
| 型号： | PSE201 |
| 厂商： | SMC Corporation of America |
| 文件页数： | 14/23页 |
| 文件大小： | 0K |
| 描述： | SENSOR CONTROLLER 4CH 5OUT PNP |
| 标准包装： | 1 |
| 系列： | PSE200 |
| 产品目录页面： | 2804 (CN2011-ZH PDF) |
| 其它名称： | 606-1017 |
Series
PSE
Specific Product Precautions 1
Be sure to read before handling.
{ Pressure Sensor
Handling
Warning
{ Controller
Warning
Handling
1. Do not drop, bump, or apply excessive impacts (980
m/s 2 ) while handling. Although the body of the
sensor may not be damaged, the inside of the
sensor could be damaged and lead to a
malfunction.
1. Do not drop, bump, or apply excessive impacts
(1000 m/s 2 ) while handling. Although the body of
the controller case may not be damaged, the inside
of the controller could be damaged and cause a
malfunction.
ZSE ?
ISE ?
PSE
2. The tensile strength of the cord is 23 N. Applying a
greater pulling force on it can cause a malfunction.
2. The tensile strength of the power supply/output
connection cable is 50 N; that of the pressure
Z
I
SE3
When handling, hold the body of the sensor—do
not dangle it from the cord.
sensor lead wire with connector is 25 N. Applying a
greater pulling force than the applicable specified
PS
3. Do not exceed the screw-in torque of 3.5 N ? m when
installing piping. Exceeding this value may cause
tensile strength to either of these components can
lead to a malfunction. When handling, hold the
Z
I
SE 12
malfunctioning of the sensor.
4. Do not use pressure sensors with corrosive and/or
inflammable gases or liquids.
5. Connecting the sensor cable (Option)
Hold the female connector of the sensor cable with your
fingers and carefully insert it into the connector.
Sensor
Male connector
Female connector
A connector cover is provided as part of the cable assembly
(see the figure below). It is designed to keep the female
connector from slipping out of the sensor. To lock the connector
cover in place, first make sure it is facing in the right direction
as you slip it over the female connector, then lock it to the
sensor body by turning it clockwise. To remove the cover, first
unlock it by turning it counterclockwise, then pull back on it. To
remove the female connector, grab it with your fingers and pull
back on it. Do not pull on the cable.
Lock
Sensor
Connector cover
Unlock
Operating Environment
Warning
1. The pressure sensors are CE marked; however, they
body of the controller—do not dangle it from the
cord.
Connection
Warning
1. Incorrect wiring can damage the switch and cause
a malfunction or erroneous switch output.
Connections should be done while the power is
turned off.
2. Do not attempt to insert or pull the pressure sensor
or its connector when the power is on. Switch
output may malfunction.
3. Wire separately from power lines and high voltage
lines, avoiding wiring in the same conduit with
these lines. Malfunctions may occur due to noise
from these other lines.
4. If a commercial switching regulator is used, make
sure that the F.G. terminal is grounded.
Operating Environment
Warning
1. Our multi-channel pressure sensor controllers are
CE marked; however, they are not equipped with
surge protection against lightning. Lightning surge
countermeasures should be applied directly to
system components as necessary.
2. Our multi-channel pressure sensor controllers do
not have an explosion proof rating. Never use
pressure sensors in the presence of inflammable or
explosive gases.
3. Enclosure “IP65” applies only to the front face of
the panel when mounting. Do not use in an
environment where oil splashing or spraying are
anticipated.
ZSP
ISA2
IS ?
ZSM
PF2 ?
IF ?
Data
are not equipped with surge protection against
lightning. Lightning surge countermeasures should
be applied directly to system components as
necessary.
2. The pressure sensors do not have an explosion
proof rating. Never use pressure sensors in the
presence of inflammable or explosive gases.
16-3-19
相关PDF资料 |
PDF描述 |
|---|---|
| XPCRED-L1-0000-00401 | LED RED XLAMP CLR SMD |
| CLN6A-WKW-CK0L0343 | LED COOL WHITE 5X5MM SMD |
| MX3SWT-A1-0000-000E51 | LED COOL WHITE 6500K XLAMP SMD |
| MX6AWT-A1-R250-000BE3 | LED XLAMP COOL WHITE 5000K SMD |
| CLN6A-MKW-CJ0K0233 | LED WARM WHITE 5X5MM SMD |
相关代理商/技术参数 |
参数描述 |
|---|---|
| PSE201-A4C | 制造商:SMC Corporation of America 功能描述:CONTROLLER, PRESSURE SENSOR 制造商:SMC 功能描述:Multi-channel digital sensor controller |
| PSE22 | 制造商:SCHURTER 制造商全称:Schurter Inc. 功能描述:Snap-in switch for switches PSE, MSM and MCS 30 |
| PSE24-105 | 制造商:POWERSOLVE 功能描述:PSU DESKTOP 5V 3A |
| PSE24-105 | 制造商:POWERSOLVE 功能描述:PSU DESKTOP 5V 3A |
| PSE24-209 | 制造商:POWERSOLVE 功能描述:PSU DESKTOP 9V 2.4A |
发布紧急采购，3分钟左右您将得到回复。