- 您现在的位置：买卖IC网 > PDF目录21905 > PSE201 (SMC Corporation of America)SENSOR CONTROLLER 4CH 5OUT PNP PDF资料下载
参数资料
| 型号： | PSE201 |
| 厂商： | SMC Corporation of America |
| 文件页数： | 18/23页 |
| 文件大小： | 0K |
| 描述： | SENSOR CONTROLLER 4CH 5OUT PNP |
| 标准包装： | 1 |
| 系列： | PSE200 |
| 产品目录页面： | 2804 (CN2011-ZH PDF) |
| 其它名称： | 606-1017 |
Common Precautions
Be sure to read before handling.
For detailed precautions on every series, refer to main text.
Selection
Warning
1. Confirm the specifications.
Products represented in this catalog are designed for use in
compressed air appllications only (including vacuum), unless
otherwise indicated.
Do not use the product outside their design parameters.
Please contact SMC when using the products in applications
other than compressed air (including vacuum).
Mounting
Warning
1. Instruction manual
Install the products and operate them only after reading the
instruction manual carefully and understanding its contents.
Also keep the manual where it can be referred to as
necessary.
2. Securing the space for maintenance
When installing the products, please allow access for
maintenance.
3. Tightening torque
When installing the products, please follow the listed torque
specifications.
Piping
Caution
1. Before piping
Make sure that all debris, cutting oil, dust, etc, are removed
from the piping.
2. Wrapping of pipe tape
When screwing piping or fittings into ports, ensure that chips
from the pipe threads or sealing material do not get inside the
piping. Also, when the pipe tape is used, leave 1.5 to 2 thread
ridges exposed at the end of the threads.
Air Supply
Warning
1. Operating fluid
Please consult with SMC when using the product in
applications other than compressed air (including vacuum).
Regarding products for general fluid, please ask SMC about
applicable fluids.
2. Install an air dryer, aftercooler, etc.
Excessive condensate in a compressed air system may cause
valves and other pneumatic equipment to malfunction.
Installation of an air dryer, after cooler etc. is recommended.
3. Drain flushing
If condensate in the drain bowl is not emptied on a regular
basis, the bowl will over flow and allow the condensate to
enter the compressed air lines.
If the drain bowl is difficult to check and remove, it is
recommended that a drain bowl with the auto-drain option be
installed.
For compressed air quality, refer to “Air Preparation
Equipment” catalog.
16-14-4
4. Use clean air
If the compressed air supply is contaminated with chemicals,
cynthetic materials, corrosive gas, etc., it may lead to break
down or malfunction.
Operating Environment
Warning
1. Do not use in environments where the product
is directly exposed to corrosive gases,
chemicals, salt water, water or steam.
2. Do not expose the product to direct sunlight
for an extended period of time.
3. Do not use in a place subject to heavy
vibrations and/or shocks.
4. Do not mount the product in locations where it
is exposed to radiant heat.
Maintenance
Warning
1. Maintenance procedures are outlined in the
operation manual.
Not following proper procedures could cause the product to
malfunction and could lead to damage to the equipment or
machine.
2. Maintenance work
If handled improperly, compressed air can be dangerous.
Assembly, handling and repair of pneumatic systems should
be performed by qualified personnel only.
3. Drain flushing
Remove drainage from air filters regularly. (Refer to the
specifications.)
4. Shut-down before maintenance
Before attempting any kind of maintenance make sure the
supply pressure is shut of and all residual air pressure is
released from the system to be worked on.
5. Start-up after maintenance and inspection
Apply operating pressure and power to the equipment and
check for proper operation and possible air leaks. If operation
is abnormal, please verify product set-up parameters.
6. Do not make any modifications to be product.
Do not take the product apart.
相关PDF资料 |
PDF描述 |
|---|---|
| XPCRED-L1-0000-00401 | LED RED XLAMP CLR SMD |
| CLN6A-WKW-CK0L0343 | LED COOL WHITE 5X5MM SMD |
| MX3SWT-A1-0000-000E51 | LED COOL WHITE 6500K XLAMP SMD |
| MX6AWT-A1-R250-000BE3 | LED XLAMP COOL WHITE 5000K SMD |
| CLN6A-MKW-CJ0K0233 | LED WARM WHITE 5X5MM SMD |
相关代理商/技术参数 |
参数描述 |
|---|---|
| PSE201-A4C | 制造商:SMC Corporation of America 功能描述:CONTROLLER, PRESSURE SENSOR 制造商:SMC 功能描述:Multi-channel digital sensor controller |
| PSE22 | 制造商:SCHURTER 制造商全称:Schurter Inc. 功能描述:Snap-in switch for switches PSE, MSM and MCS 30 |
| PSE24-105 | 制造商:POWERSOLVE 功能描述:PSU DESKTOP 5V 3A |
| PSE24-105 | 制造商:POWERSOLVE 功能描述:PSU DESKTOP 5V 3A |
| PSE24-209 | 制造商:POWERSOLVE 功能描述:PSU DESKTOP 9V 2.4A |
发布紧急采购，3分钟左右您将得到回复。