- 您现在的位置：买卖IC网 > PDF目录69302 > R2051K02 (RICOH COMPANY LTD) 0 TIMER(S), REAL TIME CLOCK, QCC12 PDF资料下载
参数资料
| 型号： | R2051K02 |
| 厂商： | RICOH COMPANY LTD |
| 元件分类： | 时钟/数据恢复及定时提取 |
| 英文描述： | 0 TIMER(S), REAL TIME CLOCK, QCC12 |
| 封装： | 2 X 2 MM, 0.85 MM PITCH, ULTRA-COMPACT, FFP, 12 PIN |
| 文件页数： | 37/53页 |
| 文件大小： | 343K |
| 代理商： | R2051K02 |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页当前第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页第47页第48页第49页第50页第51页第52页第53页
R2051 Series
12345
Rev.1.04
- 42 -
In the pulse mode, the increment of the second counter is delayed by approximately 92
s from the
falling edge of clock pulses. Consequently, time readings immediately after the falling edge of clock
pulses may appear to lag behind the time counts of the real-time clocks by approximately 1 second.
Rewriting the second counter will reset the other time counters of less than 1 second, driving the /INTR
pin low.
*2) Level Mode:
Periodic interrupt signals are output with selectable interrupt cycle settings of 1 second, 1 minute, 1 hour,
and 1 month. The increment of the second counter is synchronized with the falling edge of periodic
interrupt signals. For example, periodic interrupt signals with an interrupt cycle setting of 1 second are
output in synchronization with the increment of the second counter as illustrated in the timing chart
below.
/INTR Pin
(Increment of
second counter)
CTFG Bit
Setting CTFG bit to 0
(Increment of
second counter)
(Increment of
second counter)
*1), *2) When the oscillation adjustment circuit is used, the interrupt cycle will fluctuate once per 20sec. as
follows:
Pulse Mode: The “L” period of output pulses will increment or decrement by a maximum of
±3.784ms. For
example, 1-Hz clock pulses will have a duty cycle of 50
±0.3784%.
Level Mode: A periodic interrupt cycle of 1 second will increment or decrement by a maximum of
±3.784 ms.
相关PDF资料 |
PDF描述 |
|---|---|
| R2051K01 | 0 TIMER(S), REAL TIME CLOCK, QCC12 |
| R3F10031NSP | FLASH, 8 MHz, MICROCONTROLLER, PDSO24 |
| R3F10011NSP | FLASH, 8 MHz, MICROCONTROLLER, PDSO20 |
| R3F10011NXXXSP | MROM, 8 MHz, MICROCONTROLLER, PDSO20 |
| R42181 | SINGLE COLOR LED, RED, 5.6 mm |
相关代理商/技术参数 |
参数描述 |
|---|---|
| R2051K02-E2 | 制造商:RICOH 制造商全称:RICOH electronics devices division 功能描述:2 wire interface Real-Time Clock ICs with Battery Backup switch-over Function |
| R2051S01-E2 | 制造商:RICOH 制造商全称:RICOH electronics devices division 功能描述:2 wire interface Real-Time Clock ICs with Battery Backup switch-over Function |
| R2051S02-E2 | 制造商:RICOH 制造商全称:RICOH electronics devices division 功能描述:2 wire interface Real-Time Clock ICs with Battery Backup switch-over Function |
| R2051S03-E2 | 制造商:RICOH 制造商全称:RICOH electronics devices division 功能描述:2 wire interface Real-Time Clock ICs with Battery Backup switch-over Function |
| R2051T01-E2 | 制造商:RICOH 制造商全称:RICOH electronics devices division 功能描述:2 wire interface Real-Time Clock ICs with Battery Backup switch-over Function |
发布紧急采购，3分钟左右您将得到回复。