- 您现在的位置：买卖IC网 > PDF目录69302 > R2051K02 (RICOH COMPANY LTD) 0 TIMER(S), REAL TIME CLOCK, QCC12 PDF资料下载
参数资料
| 型号： | R2051K02 |
| 厂商： | RICOH COMPANY LTD |
| 元件分类： | 时钟/数据恢复及定时提取 |
| 英文描述： | 0 TIMER(S), REAL TIME CLOCK, QCC12 |
| 封装： | 2 X 2 MM, 0.85 MM PITCH, ULTRA-COMPACT, FFP, 12 PIN |
| 文件页数： | 8/53页 |
| 文件大小： | 343K |
| 代理商： | R2051K02 |
第1页第2页第3页第4页第5页第6页第7页当前第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页第47页第48页第49页第50页第51页第52页第53页
R2051 Series
12345
Rev.1.04
- 16 -
(6) CTFG
Periodic Interrupt Flag Bit
CTFG
Description
0
Periodic interrupt output = “H”
(Default)
1
Periodic interrupt output = “L”
The CTFG bit is set to 1 when the periodic interrupt signals are output from the /INTR pin (“L”). The CTFG bit
accepts only the writing of 0 in the level mode, which disables (“H”) the /INTR pin until it is enabled (“L”) again
in the next interrupt cycle. Conversely, setting the CTFG bit to 1 causes no event.
(7) WAFG,DAFG
Alarm_W Flag Bit and Alarm_D Flag Bit
WAFG,DAFG
Description
0
Indicating a mismatch between current time and preset alarm time
(Default)
1
Indicating a match between current time and preset alarm time
The WAFG and DAFG bits are valid only when the WALE and DALE have the setting of 1, which is caused
approximately 61
s after any match between current time and preset alarm time specified by the Alarm_W
registers and the Alarm_D registers. The WAFG (DAFG) bit accepts only the writing of 0. /INTR pin outputs
off (“H”) when this bit is set to 0. And /INTR pin outputs “L” again at the next preset alarm time.
Conversely,
setting the WAFG and DAFG bits to 1 causes no event. The WAFG and DAFG bits will have the reading of 0
when the alarm interrupt circuit is disabled with the WALE and DALE bits set to 0. The settings of the WAFG
and DAFG bits are synchronized with the output of the /INTR pin as shown in the timing chart below.
/INTR Pin
Writing of 0 to
WAFG(DAFG) bit
WAFG(DAFG) Bit
(Match between
current time and
preset alarm time)
Approx. 61
s
Approx. 61
s
Writing of 0 to
WAFG(DAFG) bit
(Match between
current time and
preset alarm time)
(Match between
current time and
preset alarm time)
相关PDF资料 |
PDF描述 |
|---|---|
| R2051K01 | 0 TIMER(S), REAL TIME CLOCK, QCC12 |
| R3F10031NSP | FLASH, 8 MHz, MICROCONTROLLER, PDSO24 |
| R3F10011NSP | FLASH, 8 MHz, MICROCONTROLLER, PDSO20 |
| R3F10011NXXXSP | MROM, 8 MHz, MICROCONTROLLER, PDSO20 |
| R42181 | SINGLE COLOR LED, RED, 5.6 mm |
相关代理商/技术参数 |
参数描述 |
|---|---|
| R2051K02-E2 | 制造商:RICOH 制造商全称:RICOH electronics devices division 功能描述:2 wire interface Real-Time Clock ICs with Battery Backup switch-over Function |
| R2051S01-E2 | 制造商:RICOH 制造商全称:RICOH electronics devices division 功能描述:2 wire interface Real-Time Clock ICs with Battery Backup switch-over Function |
| R2051S02-E2 | 制造商:RICOH 制造商全称:RICOH electronics devices division 功能描述:2 wire interface Real-Time Clock ICs with Battery Backup switch-over Function |
| R2051S03-E2 | 制造商:RICOH 制造商全称:RICOH electronics devices division 功能描述:2 wire interface Real-Time Clock ICs with Battery Backup switch-over Function |
| R2051T01-E2 | 制造商:RICOH 制造商全称:RICOH electronics devices division 功能描述:2 wire interface Real-Time Clock ICs with Battery Backup switch-over Function |
发布紧急采购，3分钟左右您将得到回复。