参数资料
型号: R5F6411FDFN
元件分类: 微控制器/微处理器
英文描述: 32-BIT, FLASH, 50 MHz, MICROCONTROLLER, PQFP64
封装: 10 X 10 MM, 0.50 MM PITCH, PLASTIC, LQFP-64
文件页数: 79/84页
文件大小: 1206K
代理商: R5F6411FDFN
ATmega48PA/88PA/168PA [DATASHEET]
9223F–AVR–04/14
94
15.9.2 TCCR0B – Timer/Counter Control Register B
Bit 7 – FOC0A: Force Output Compare A
The FOC0A bit is only active when the WGM bits specify a non-PWM mode.
However, for ensuring compatibility with future devices, this bit must be set to zero when TCCR0B is written when operating
in PWM mode. When writing a logical one to the FOC0A bit, an immediate compare match is forced on the waveform
generation unit. The OC0A output is changed according to its COM0A1:0 bits setting. Note that the FOC0A bit is
implemented as a strobe. Therefore it is the value present in the COM0A1:0 bits that determines the effect of the forced
compare.
A FOC0A strobe will not generate any interrupt, nor will it clear the timer in CTC mode using OCR0A as TOP.
The FOC0A bit is always read as zero.
Bit 6 – FOC0B: Force Output Compare B
The FOC0B bit is only active when the WGM bits specify a non-PWM mode.
However, for ensuring compatibility with future devices, this bit must be set to zero when TCCR0B is written when operating
in PWM mode. When writing a logical one to the FOC0B bit, an immediate compare match is forced on the waveform
generation unit. The OC0B output is changed according to its COM0B1:0 bits setting. Note that the FOC0B bit is
implemented as a strobe. Therefore it is the value present in the COM0B1:0 bits that determines the effect of the forced
compare.
A FOC0B strobe will not generate any interrupt, nor will it clear the timer in CTC mode using OCR0B as TOP.
The FOC0B bit is always read as zero.
Bits 5:4 – Reserved
These bits are reserved bits in the Atmel ATmega48PA/88PA/168PA and will always read as zero.
Bit 3 – WGM02: Waveform Generation Mode
Bits 2:0 – CS02:0: Clock Select
The three clock select bits select the clock source to be used by the Timer/Counter.
If external pin modes are used for the Timer/Counter0, transitions on the T0 pin will clock the counter even if the pin is
configured as an output. This feature allows software control of the counting.
Bit
7
6
5
4
3
2
1
0
FOC0A
FOC0B
WGM02
CS02
CS01
CS00
TCCR0B
Read/Write
W
R
R/W
Initial Value
0
Table 15-9. Clock Select Bit Description
CS02
CS01
CS00
Description
0
No clock source (timer/ccounter stopped)
0
1
clkI/O/(no prescaling)
0
1
0
clkI/O/8 (from prescaler)
0
1
clkI/O/64 (from prescaler)
1
0
clkI/O/256 (from prescaler)
1
0
1
clkI/O/1024 (from prescaler)
1
0
External clock source on T0 pin. Clock on falling edge.
1
External clock source on T0 pin. Clock on rising edge.
相关PDF资料
PDF描述
R5F6411FDFP 32-BIT, FLASH, 50 MHz, MICROCONTROLLER, PQFP80
R5F6411FDLG 32-BIT, FLASH, 50 MHz, MICROCONTROLLER, PBGA100
R5F6411FNFN 32-BIT, FLASH, 50 MHz, MICROCONTROLLER, PQFP64
R5F21366CDFA 8-BIT, FLASH, 20 MHz, MICROCONTROLLER, PQFP64
R5F21368FKFP 32-BIT, FLASH, 20 MHz, MICROCONTROLLER, PQFP64
相关代理商/技术参数
参数描述
R5F6411FDFN#UA 功能描述:MCU 256+8KB FLASH 32K 64-LQFP RoHS:是 类别:集成电路 (IC) >> 嵌入式 - 微控制器, 系列:M16C/R32C/100/111 标准包装:96 系列:PIC® 16F 核心处理器:PIC 芯体尺寸:8-位 速度:20MHz 连通性:I²C,SPI 外围设备:欠压检测/复位,POR,PWM,WDT 输入/输出数:11 程序存储器容量:3.5KB(2K x 14) 程序存储器类型:闪存 EEPROM 大小:- RAM 容量:128 x 8 电压 - 电源 (Vcc/Vdd):2.3 V ~ 5.5 V 数据转换器:A/D 8x10b 振荡器型:内部 工作温度:-40°C ~ 125°C 封装/外壳:14-TSSOP(0.173",4.40mm 宽) 包装:管件
R5F6411FDFP 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:RENESAS MCU
R5F6411FDLG 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:RENESAS MCU
R5F6411FNFN 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:RENESAS MCU
R5F6411FNFN#U0 制造商:Renesas Electronics Corporation 功能描述:MCU 5.5V 512K ROM - Trays