参数资料
型号: R5F6411FDFN
元件分类: 微控制器/微处理器
英文描述: 32-BIT, FLASH, 50 MHz, MICROCONTROLLER, PQFP64
封装: 10 X 10 MM, 0.50 MM PITCH, PLASTIC, LQFP-64
文件页数: 80/84页
文件大小: 1206K
代理商: R5F6411FDFN
95
ATmega48PA/88PA/168PA [DATASHEET]
9223F–AVR–04/14
15.9.3 TCNT0 – Timer/Counter Register
The Timer/Counter register gives direct access, both for read and write operations, to the Timer/Counter unit 8-bit counter.
Writing to the TCNT0 register blocks (removes) the compare match on the following timer clock. Modifying the counter
(TCNT0) while the counter is running, introduces a risk of missing a compare match between TCNT0 and the OCR0x
registers.
15.9.4 OCR0A – Output Compare Register A
The output compare register A contains an 8-bit value that is continuously compared with the counter value (TCNT0). A
match can be used to generate an output compare interrupt, or to generate a waveform output on the OC0A pin.
15.9.5 OCR0B – Output Compare Register B
The output compare register B contains an 8-bit value that is continuously compared with the counter value (TCNT0). A
match can be used to generate an output compare interrupt, or to generate a waveform output on the OC0B pin.
15.9.6 TIMSK0 – Timer/Counter Interrupt Mask Register
Bits 7:3 – Reserved
These bits are reserved bits in the Atmel ATmega48PA/88PA/168PA and will always read as zero.
Bit 2 – OCIE0B: Timer/Counter Output Compare Match B Interrupt Enable
When the OCIE0B bit is written to one, and the I-bit in the status register is set, the Timer/Counter compare match B interrupt
is enabled. The corresponding interrupt is executed if a compare match in Timer/Counter occurs, i.e., when the OCF0B bit is
set in the Timer/Counter interrupt flag register – TIFR0.
Bit 1 – OCIE0A: Timer/Counter0 Output Compare Match A Interrupt Enable
When the OCIE0A bit is written to one, and the I-bit in the status register is set, the Timer/Counter0 compare match A
interrupt is enabled. The corresponding interrupt is executed if a compare match in Timer/Counter0 occurs, i.e., when the
OCF0A bit is set in the Timer/Counter 0 interrupt flag register – TIFR0.
Bit 0 – TOIE0: Timer/Counter0 Overflow Interrupt Enable
When the TOIE0 bit is written to one, and the I-bit in the status register is set, the Timer/Counter0 overflow interrupt is
enabled. The corresponding interrupt is executed if an overflow in Timer/Counter0 occurs, i.e., when the TOV0 bit is set in
the Timer/Counter 0 interrupt flag register – TIFR0.
Bit
7654
3210
TCNT0[7:0]
TCNT0
Read/Write
R/W
Initial Value
0000
Bit
76543
210
OCR0A[7:0]
OCR0A
Read/Write
R/W
Initial Value
00000
000
Bit
765
43210
OCR0B[7:0]
OCR0B
Read/Write
R/W
Initial Value
000
00000
Bit
7
6
5
4
3
2
1
0
OCIE0B
OCIE0A
TOIE0
TIMSK0
Read/Write
R
R/W
Initial Value
0
相关PDF资料
PDF描述
R5F6411FDFP 32-BIT, FLASH, 50 MHz, MICROCONTROLLER, PQFP80
R5F6411FDLG 32-BIT, FLASH, 50 MHz, MICROCONTROLLER, PBGA100
R5F6411FNFN 32-BIT, FLASH, 50 MHz, MICROCONTROLLER, PQFP64
R5F21366CDFA 8-BIT, FLASH, 20 MHz, MICROCONTROLLER, PQFP64
R5F21368FKFP 32-BIT, FLASH, 20 MHz, MICROCONTROLLER, PQFP64
相关代理商/技术参数
参数描述
R5F6411FDFN#UA 功能描述:MCU 256+8KB FLASH 32K 64-LQFP RoHS:是 类别:集成电路 (IC) >> 嵌入式 - 微控制器, 系列:M16C/R32C/100/111 标准包装:96 系列:PIC® 16F 核心处理器:PIC 芯体尺寸:8-位 速度:20MHz 连通性:I²C,SPI 外围设备:欠压检测/复位,POR,PWM,WDT 输入/输出数:11 程序存储器容量:3.5KB(2K x 14) 程序存储器类型:闪存 EEPROM 大小:- RAM 容量:128 x 8 电压 - 电源 (Vcc/Vdd):2.3 V ~ 5.5 V 数据转换器:A/D 8x10b 振荡器型:内部 工作温度:-40°C ~ 125°C 封装/外壳:14-TSSOP(0.173",4.40mm 宽) 包装:管件
R5F6411FDFP 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:RENESAS MCU
R5F6411FDLG 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:RENESAS MCU
R5F6411FNFN 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:RENESAS MCU
R5F6411FNFN#U0 制造商:Renesas Electronics Corporation 功能描述:MCU 5.5V 512K ROM - Trays