!Caution
!Caution
!Caution
!Caution
!Caution
!Caution
Be sure that all the mounting screws, terminal screws, and cable connector
screws are tightened to the torque specified in the relevant manuals. Incorrect
tightening torque may result in malfunction.
Use crimp terminals for wiring. Do not connect bare stranded wires directly to ter-
minals. Connection of bare stranded wires may result in burning.
Always use the power supply voltage specified in the User’s Manual. An incorrect
voltage may result in malfunction or burning.
Take appropriate measures to ensure that the specified power with the rated volt-
age and frequency is supplied. Be particularly careful in places where the power
supply is unstable. An incorrect power supply may result in malfunction.
Install external breakers and take other safety measures against short-circuiting in
external wiring. Insufficient safety measures against short-circuiting may result in
burning.
Take appropriate and sufficient countermeasures when installing systems in the
following locations. Failure to do so may result in damage to the product.
? Locations subject to static electricity or other forms of noise.
? Locations subject to strong electromagnetic fields and magnetic fields.
? Locations subject to possible exposure to radioactivity.
? Locations close to power supplies.
Operation and Adjustment Precautions
!Caution
!Caution
!Caution
!Caution
!Caution
!Caution
Confirm that no adverse effects will occur in the system before performing the test
operation. Not doing so may result in equipment damage.
Check the newly set parameters and switches for proper execution before actually
running them. Not doing so may result in equipment damage.
Do not make any extreme adjustments or setting changes. Doing so may result in
unstable operation and injury.
Separate the Servomotor from the machine, check for proper operation, and then
connect to the machine. Not doing so may cause injury.
When an alarm occurs, remove the cause, reset the alarm after confirming safety,
and then resume operation. Not doing so may result in injury.
Do not use the built-in brake of the Servomotor for ordinary braking. Doing so may
result in malfunction.