参数资料
型号: R8A66171SP
元件分类: 微控制器/微处理器
英文描述: SPECIALTY MICROPROCESSOR CIRCUIT, PDSO24
封装: SOP-24
文件页数: 14/24页
文件大小: 678K
代理商: R8A66171SP
21
XMEGA E5 [DATASHEET]
8153G–AVR–10/2013
1kHz output. The oscillator is automatically enabled/disabled when it is used as clock source for any part of the device.
This oscillator can be selected as the clock source for the RTC.
11.3.2 32.768kHz Calibrated Internal Oscillator
This oscillator provides an approximate 32.768kHz clock. It is calibrated during production to provide a default frequency
close to its nominal frequency. The calibration register can also be written from software for run-time calibration of the
oscillator frequency. The oscillator employs a built-in prescaler, which provides both a 32.768kHz output and a 1.024kHz
output.
11.3.3 32.768kHz Crystal Oscillator
A 32.768kHz crystal oscillator can be connected between the TOSC1 and TOSC2 pins and enables a dedicated low
frequency oscillator input circuit. A low power mode with reduced voltage swing on TOSC2 is available. This oscillator
can be used as a clock source for the system clock and RTC, and as the DFLL reference clock.
11.3.4 0.4 - 16MHz Crystal Oscillator
This oscillator can operate in four different modes optimized for different frequency ranges, all within 0.4 - 16MHz.
11.3.5 8MHz Calibrated Internal Oscillator
The 8MHz calibrated internal oscillator is the default system clock source after reset. It is calibrated during production to
provide a default frequency close to its nominal frequency. The calibration register can also be written from software for
run-time calibration of the oscillator frequency. The oscillator employs a built-in prescaler, with 2MHz output. The default
output frequency at start-up and after reset is 2MHz. A low power mode option can be used to enable fast system wake-
up from power-save mode. In all other modes, the low power mode can be enabled to significantly reduce the power
consumption of the internal oscillator.
11.3.6 32MHz Run-time Calibrated Internal Oscillator
The 32MHz run-time calibrated internal oscillator is a high-frequency oscillator. It is calibrated during production to
provide a default frequency close to its nominal frequency. A digital frequency looked loop (DFLL) can be enabled for
automatic run-time calibration of the oscillator to compensate for temperature and voltage drift and optimize the oscillator
accuracy. This oscillator can also be adjusted and calibrated to any frequency between 30MHz and 55MHz.
11.3.7 External Clock Sources
The XTAL1 and XTAL2 pins can be used to drive an external oscillator, either a quartz crystal or a ceramic resonator.
XTAL1 or pin 4 of port C (PC4) can be used as input for an external clock signal. The TOSC1 and TOSC2 pins are
dedicated to driving a 32.768kHz crystal oscillator.
11.3.8 PLL with 1x-31x Multiplication Factor
The built-in phase locked loop (PLL) can be used to generate a high-frequency system clock. The PLL has a user-
selectable multiplication factor of from 1 to 31. In combination with the prescalers, this gives a wide range of output
frequencies from all clock sources.
相关PDF资料
PDF描述
R8A77800ANBG 32-BIT, FLASH, 402 MHz, RISC MICROCONTROLLER, PBGA449
R8A77850AADBG RISC MICROCONTROLLER, PBGA436
R8A77850AADBG RISC MICROCONTROLLER, PBGA436
RA-8581SAB-3 REAL TIME CLOCK, PDSO14
RB80526PY733256 32-BIT, 733 MHz, MICROPROCESSOR, CPGA370
相关代理商/技术参数
参数描述
R8A66173SP 制造商:Renesas Electronics Corporation 功能描述:
R8A66174SP 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:PARALLEL-IN SERIAL-OUT DATA BUFFER WITH FIFO
R8A66593FP 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:ASSP (USB2.0 Peripheral Controller)
R8A66597BG 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:ASSP (USB2.0 2 Port Host/1 Port Peripheral Controller)
R8A66597BG#DF1S 制造商:Renesas Electronics Corporation 功能描述:USB 2, 2-PORT HOST OR 1-PORT PERIPH CTRL - Tape and Reel 制造商:Renesas Electronics Corporation 功能描述:IC CONTROLLER USM 81LFBGA