参数资料
型号: R8A66171SP
元件分类: 微控制器/微处理器
英文描述: SPECIALTY MICROPROCESSOR CIRCUIT, PDSO24
封装: SOP-24
文件页数: 4/24页
文件大小: 678K
代理商: R8A66171SP
12
XMEGA E5 [DATASHEET]
8153G–AVR–10/2013
8.3.4
Production Signature Row
The production signature row is a separate memory section for factory programmed data. It contains calibration data for
functions such as oscillators and analog modules. Some of the calibration values will be automatically loaded to the
corresponding module or peripheral unit during reset. Other values must be loaded from the signature row and written to
the corresponding peripheral registers from software. For details on calibration conditions, refer to “Electrical
The production signature row also contains an ID that identifies each microcontroller device type and a serial number for
each manufactured device. The serial number consists of the production lot number, wafer number, and wafer
coordinates for the device. The device ID for the available devices is shown in Table 8-1.
The production signature row cannot be written or erased, but it can be read from application software and external
programmers.
Table 8-1.
Device ID bytes for Atmel AVR XMEGA E5 devices.
8.3.5
User Signature Row
The user signature row is a separate memory section that is fully accessible (read and write) from application software
and external programmers. It is one flash page in size, and is meant for static user parameter storage, such as calibration
data, custom serial number, identification numbers, random number seeds, etc. This section is not erased by chip erase
commands that erase the flash, and requires a dedicated erase command. This ensures parameter storage during
multiple program/erase operations and on-chip debug sessions.
8.4
Fuses and Lock bits
The fuses are used to configure important system functions, and can only be written from an external programmer. The
application software can read the fuses. The fuses are used to configure reset sources such as brownout detector and
watchdog, startup configuration, etc.
The lock bits are used to set protection levels for the different flash sections (i.e., if read and/or write access should be
blocked). Lock bits can be written by external programmers and application software, but only to stricter protection levels.
Chip erase is the only way to erase the lock bits. To ensure that flash contents are protected even during chip erase, the
lock bits are erased after the rest of the flash memory has been erased.
An un-programmed fuse or lock bit will have the value one, while a programmed fuse or lock bit will have the value zero.
Both fuses and lock bits are reprogrammable like the flash program memory.
8.5
Data Memory
The data memory contains the I/O memory, internal SRAM and EEPROM. The data memory is organized as one
continuous memory section, see Table 8-2 on page 14. To simplify development, I/O Memory, EEPROM and SRAM will
always have the same start addresses for all XMEGA devices.
Device
Device ID bytes
Byte 2
Byte 1
Byte 0
ATxmega32E5
4C
95
1E
ATxmega16E5
45
94
1E
ATxmega8E5
41
93
1E
相关PDF资料
PDF描述
R8A77800ANBG 32-BIT, FLASH, 402 MHz, RISC MICROCONTROLLER, PBGA449
R8A77850AADBG RISC MICROCONTROLLER, PBGA436
R8A77850AADBG RISC MICROCONTROLLER, PBGA436
RA-8581SAB-3 REAL TIME CLOCK, PDSO14
RB80526PY733256 32-BIT, 733 MHz, MICROPROCESSOR, CPGA370
相关代理商/技术参数
参数描述
R8A66173SP 制造商:Renesas Electronics Corporation 功能描述:
R8A66174SP 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:PARALLEL-IN SERIAL-OUT DATA BUFFER WITH FIFO
R8A66593FP 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:ASSP (USB2.0 Peripheral Controller)
R8A66597BG 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:ASSP (USB2.0 2 Port Host/1 Port Peripheral Controller)
R8A66597BG#DF1S 制造商:Renesas Electronics Corporation 功能描述:USB 2, 2-PORT HOST OR 1-PORT PERIPH CTRL - Tape and Reel 制造商:Renesas Electronics Corporation 功能描述:IC CONTROLLER USM 81LFBGA