50
S29CD-J & S29CL-J Flash Family
S29CD-J_CL-J_00_B1 September27,2006
Prel imi n ary
13 Electrical Specifications
13.1
Absolute Maximum Ratings
Storage Temperature, Plastic Packages. . . . . . . . . . . . . . . . . . . . . . . . . . . –65°C to +150°C
Ambient Temperature with Power Applied . . . . . . . . . . . . . . . . . . . . . . . . . –65°C to +145°C
VCC, VIO (Note 1) for 2.6 V devices (S29CD-J) . . . . . . . . . . . . . . . . . . . . . . .-0.5V to +3.6 V
VCC, VIO (Note 1) for 3.3 V devices (S29CL-J) . . . . . . . . . . . . . . . . . . . . . . . . -0.5V to +3.6V
ACC, A9, and RESET# (Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.5 V to +13.0 V
Address, Data, Control Signals
(with the exception of CLK) (Note 1) . . . . . . . . . . . . . . . . . . . -0.5 V to +3.6V (16Mb)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .-0.5V to +2.75V (32Mb)
All other pins (Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.5 V to +3.6V (16Mb)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .-0.5V to +2.75V (32Mb)
Output Short Circuit Current (Note 3). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200 mA
Notes:
1. Minimum DC voltage on input or I/O pins is –0.5 V. During voltage transitions, input at I/O pins may overshoot VSS to
–2.0 V for periods of up to 20 ns. See Figure 13.2. Maximum DC voltage on output and I/O pins is 3.6 V. During voltage transitions output pins may overshoot to VCC + 2.0 V for periods up to 20 ns. See Figure 13.2. 2. Minimum DC input voltage on pins ACC, A9, and RESET# is -0.5 V. During voltage transitions, A9 and RESET# may
overshoot VSS to –2.0 V for periods of up to 20 ns. See Figure 13.1. Maximum DC input voltage on pin A9 is +13.0 V which may overshoot to 14.0 V for periods up to 20 ns.
3. No more than one output may be shorted to ground at a time. Duration of the short circuit should not be greater than
one second.
stress rating only; functional operation of the device at these or any other conditions above those indicated in the
operational sections of this data sheet is not implied. Exposure of the device to absolute maximum rating conditions for
extended periods may affect device reliability.
Figure 13.1 Maximum Negative Overshoot Waveform
Figure 13.2 Maximum Positive Overshoot Waveform
20 ns
+0.8 V
–0.5 V
20 ns
–2 V
20 ns
VCC +2.0 V
VCC+0.5 V
20 ns
2.0 V