参数资料
型号: SAB-C167CS-4R33M
厂商: INFINEON TECHNOLOGIES AG
元件分类: 微控制器/微处理器
英文描述: 16-BIT, MROM, 33 MHz, MICROCONTROLLER, PQFP144
封装: METRIC, PLASTIC, QFP-144
文件页数: 28/84页
文件大小: 1082K
代理商: SAB-C167CS-4R33M
C167CS-4R
C167CS-L
Data Sheet
30
V2.2, 2001-08
A/D Converter
For analog signal measurement, a 10-bit A/D converter with 24 multiplexed input
channels (16 standard channels and 8 extension channels) and a sample and hold
circuit has been integrated on-chip. It uses the method of successive approximation. The
sample time (for loading the capacitors) and the conversion time is programmable and
can so be adjusted to the external circuitry.
Overrun error detection/protection is provided for the conversion result register
(ADDAT): either an interrupt request will be generated when the result of a previous
conversion has not been read from the result register at the time the next conversion is
complete, or the next conversion is suspended in such a case until the previous result
has been read.
For applications which require less than 24 analog input channels, the remaining
channel inputs can be used as digital input port pins.
The A/D converter of the C167CS supports four different conversion modes. In the
standard Single Channel conversion mode, the analog level on a specified channel is
sampled once and converted to a digital result. In the Single Channel Continuous mode,
the analog level on a specified channel is repeatedly sampled and converted without
software intervention. In the Auto Scan mode, the analog levels on a prespecified
number of channels (standard or extension) are sequentially sampled and converted. In
the Auto Scan Continuous mode, the number of prespecified channels is repeatedly
sampled and converted. In addition, the conversion of a specific channel can be inserted
(injected) into a running sequence without disturbing this sequence. This is called
Channel Injection Mode.
The Peripheral Event Controller (PEC) may be used to automatically store the
conversion results into a table in memory for later evaluation, without requiring the
overhead of entering and exiting interrupt routines for each data transfer.
After each reset and also during normal operation the ADC automatically performs
calibration cycles. This automatic self-calibration constantly adjusts the converter to
changing operating conditions (e.g. temperature) and compensates process variations.
These calibration cycles are part of the conversion cycle, so they do not affect the normal
operation of the A/D converter.
In order to decouple analog inputs from digital noise and to avoid input trigger noise
those pins used for analog input can be disconnected from the digital IO or input stages
under software control. This can be selected for each pin separately via registers
P5DIDIS (Port 5 Digital Input Disable) and P1DIDIS (PORT1 Digital Input Disable).
相关PDF资料
PDF描述
SAB-C167CS-4RM 16-BIT, MROM, 25 MHz, MICROCONTROLLER, PQFP144
SAK-C167CS-LM 16-BIT, 25 MHz, MICROCONTROLLER, PQFP144
SAB-C167CS-4R40M 16-BIT, MROM, 40 MHz, MICROCONTROLLER, PQFP144
SAK-C167CS-4R40M 16-BIT, MROM, 40 MHz, MICROCONTROLLER, PQFP144
SAK-C504-LM 8-BIT, 12 MHz, MICROCONTROLLER, PQFP44
相关代理商/技术参数
参数描述
SAB-C167CS-4R40M 制造商:INFINEON 制造商全称:Infineon Technologies AG 功能描述:16-Bit Single-Chip Microcontroller
SAB-C167CS-4RM 制造商:INFINEON 制造商全称:Infineon Technologies AG 功能描述:16-Bit Single-Chip Microcontroller
SAB-C167CS-L16M3V 制造商:INFINEON 制造商全称:Infineon Technologies AG 功能描述:16-Bi t Single-Chip Microcontroller
SAB-C167CS-L33M 制造商:INFINEON 制造商全称:Infineon Technologies AG 功能描述:16-Bit Single-Chip Microcontroller
SABC167CSL40M 制造商:Infineon Technologies AG 功能描述: